multihome network



Hello,

I have two NICs on my box, one (primary) connected to switch and have
private IP. that IP also have a static route on Cisco PIX for
accessing this box from outside. the other interface has public IP
that is connected to another switch, i configure both IPs through
/etc/rc.conf, but I can not for some reason access my box through that
public IP, no firewall rules would prevent me from doing so. here is
my output for netstat -rn

alexus# netstat -rn
Routing tables

Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.1.1 UGS 0 250 fxp0
127.0.0.1 127.0.0.1 UH 0 2 lo0
192.168.1 link#1 UC 0 0 fxp0
192.168.1.1 00:0d:29:09:90:61 UHLW 2 2 fxp0 1171
192.168.1.250 00:16:cb:94:10:e9 UHLW 1 12 fxp0 1169
216.112.241.24/29 link#2 UC 0 0 fxp1

Internet6:
Destination Gateway Flags
Netif Expire
::1 ::1 UHL lo0
fe80::%lo0/64 fe80::1%lo0 U lo0
fe80::1%lo0 link#4 UHL lo0
ff01:4::/32 fe80::1%lo0 UC lo0
ff02::%lo0/32 fe80::1%lo0 UC lo0
alexus#

what am I missing?

--
http://alexus.org/
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • Re: multihome network
    ... I have two NICs on my box, one connected to switch and have ... but I can not for some reason access my box through that ... my output for netstat -rn ... alexus# netstat -rn ...
    (freebsd-questions)
  • Re: multihome network
    ... On 00:18:42 Nov 16, alexus wrote: ... I have two NICs on my box, one connected to switch and have ... that IP also have a static route on Cisco PIX for ... my output for netstat -rn ...
    (freebsd-questions)
  • Re: multihome network
    ... you must use advanced routing, this is very easy on linux with iproute2 but freebsd is far away for nowand you must use pf or ipf for this situation. ... On 16.11.2007, at 07:18, alexus wrote: ... I have two NICs on my box, one connected to switch and have ... my output for netstat -rn ...
    (freebsd-questions)
  • nestat -i showing lots of Ierrs (~10%)
    ... transferring Blob to Oracle. ... actually physically pulled a cable to a switch that is closer to the ... with almost zero In bound/Out bound errors. ... netstat -i ...
    (comp.unix.solaris)
  • RE: started getting repeated "bge0: PHY read timed out" messages
    ... Have you looked at the output of 'netstat -i' to see if there are ... have you looked at the switch-side interface ... negotiation which ended up at 1000tx full duplex to now be 100tx at ... between switch and server. ...
    (freebsd-questions)