RE: Changing boot partition - ACCOMPLISHED, now INIT problem :(



Hi all,
Thanks on all your hints; it helped me comprehending my problem.
I accomplished the restore of a wrecked machine only with a .tar backup from
it.

The recipe is a little tricky. I installed a minimum FreeBSD on a new
machine, during sysintall I created 2 slices (one ad1s1 to the minimum SO
and swap and another slice ad1s2 to restore the backup) I set the second
slice as bootable (option S in FDISK). Then I created the partitions on the
first slice and installed the minimum SO (ad1s1a and ad1s1b for swap). After
booting to it with F1 I created the new file system with newfs and mounted
in rw mode (ad1s2a). Restored the tar backup to it and changed the FSTAB to
the new reality (used the initial swap created on the minimum SO ad1s1b and
the new partition as / ad1s2a ). Rebooted and voila it was booting the old
FreeBSD SO.

Still after probing the hardware (CDROM, FXP0, etc ....) It showed me this
repeated error:

23:29:19 init: can't exec getty '/usr/libexec/getty' for port ...
23:29:19 init: can't exec getty '/usr/libexec/getty' for port ...
23:29:19 init: can't exec getty '/usr/libexec/getty' for port ...
23:29:19 init: can't exec getty '/usr/libexec/getty' for port ...
23:29:19 init: can't exec getty '/usr/libexec/getty' for port ...
23:29:19 init: can't exec getty '/usr/libexec/getty' for port ...
.....
....

I though it was something related with the console, so I rebooted to the
initial SO with F1, mounted the partition o see /boot and renamed
boot.config
Did another reboot and booted to F2 but the problem persists.
Do you guys have any clue what might this be and how can I solve it? Is it
something related with kernel stuff?
I have access to the contents of it if I boot through the minimum SO (F1)

Thanks for helping this newbie
Best regards to you all

Nuno


-----Original Message-----
From: Aryeh M. Friedman [mailto:aryeh.friedman@xxxxxxxxx]
Sent: quinta-feira, 27 de Dezembro de 2007 13:39
To: Nuno Gonçalves
Cc: freebsd-questions@xxxxxxxxxxx
Subject: Re: Changing boot partition

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Nuno Gonçalves wrote:
Hi all,



I Have a FreeBSD booting ok. It?s FSTAB is like this:

#Device MountPoint FStype Options

/dev/ad1s1b none swap sw

/dev/ad1s1a / ufs rw

/dev/acd0 /cdrom cd9660 ro,noauto

/dev/ad1s2d /backup ufs rw



When I boot the machine the boot manager shows me F1 and F2 to boot for.

F1 brings me /dev/ad1s1a OK

Still I want the machine to boot to /dev/ad1s2d

This partition has a backup from another FreeBSD which I want to boot.



To accomplish this, I need only to change FSTAB ?

What changes should I do ? changing /dev/ad1s2d to /dev/ad1s2a ? I read
that
a means boot root partition



I tried to change FSTAB to

#Device MountPoint FStype Options

/dev/ad1s1b none swap sw

#/dev/ad1s1a / ufs rw

/dev/acd0 /cdrom cd9660 ro,noauto

/dev/ad1s2a /backup ufs rw



And it hanged when I pressed F1 (could not mount the root partition :P )



Could you guys give any hint ?

Sorry about this questions but I am a newbie to FreeBSD

I forget the exact semantics but do a search for "installing freebsd
in a usb stick" on google the reason for referring to this site is it
shows how to duplicate what sysinstall does from the command line

- --
Aryeh M. Friedman
FloSoft Systems
http://www.flosoft-systems.com
Developer, not business, friendly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.4 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHc6rZzIOMjAek4JIRAoevAJ0WZzlRNgLiZeMzgS7RV2SS96kEBgCfe9PI
tsmEoCTLlXPqg/FWYSEcukc=
=oamg
-----END PGP SIGNATURE-----


_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • boot0 screen output with dual-boot of FreeBSD / WinXP
    ... I used FreeBSD to partition the 120Gb drive into roughly "half". ... Of course XP clobbered the boot manager, ... it appears that partition type "7" just isn't a "known" type. ...
    (freebsd-hackers)
  • RE: Changing boot partition ACCOMPLISHED, now INIT problem
    ... I installed a minimum FreeBSD and created a second slice to restore the ... mounted it and restored the backup to that partition. ... key on boot manager It started to boot the FreeBSD of the wrecked machine:) ...
    (freebsd-questions)
  • Dual Booting -- Help Please!
    ... FreeBSD getting 25 gig of my single 40 gig drive. ... Install FreeBSD 5.3-RELEASE ... I choose to install the FreeBSD Boot Manager ... Format first partition as NTFS ...
    (comp.unix.bsd.freebsd.misc)
  • Re: Filesystem layout with sperated /boot partition
    ... disk, first slice, first partition and FreeBSD on another partition? ... Would I need a boot floppy or perhaps its not possible at all? ...
    (freebsd-questions)
  • Re: Using the boot-easy boot loader..
    ... > I am currently running FreeBSD 5.2.1, installing of OS'es is really not ... > a hard task for me, except this one time and it has to do with WINDOWS ... > Windows XP on my primary C drive, and I goto install the FreeBSD boot ... > freebsd boot loader... ...
    (freebsd-questions)