I have a server running 5.4-RELEASE using RAID-5 on an Intel RAID
controller that I need to move to faster RAID. Is it possible to image
or some other way to save the current install and restore after setting
up the RAID or should I just plan to reinstall everything?
Re: bad blocks on raid5 cause filesystem failure ... It is setup in in RAID 5. ... How could a RAID controller botch this up? ... should be rebuilt on spare drive if available from remaining drives.... All is fine unless you have double fault.... (comp.os.linux.hardware)
Re: on board RAID chip ... I don't actually want to use RAID, real or otherwise, ... the two IDE channels that the "raid" chip controls,... 8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, ... > harddrive over to the second channel and tried to boot.... (Debian-User)
Re: Dell PERC 2/SC Single Channel LVD SCSI RAID Controller ... host adapter with RAID control capabilities....PERC 2/SC is an ideal RAID solution for the internal ...Multiple logical drives/arrays per controller Up to 8 logical drives ... (uk.adverts.computer)
Re: Dell PERC 2/SC Single Channel LVD SCSI RAID Controller ... 2/SC) PCI RAID controller is a high performance intelligent PCI-to-SCSI ...PERC 2/SC is an ideal RAID solution for the internal ...Multiple logical drives/arrays per controller Up to 8 logical drives ... (uk.adverts.computer)
Re: Dell PERC 2/SC Single Channel LVD SCSI RAID Controller ... 2/SC) PCI RAID controller is a high performance intelligent PCI-to-SCSI ...PERC 2/SC is an ideal RAID solution for the internal ...Multiple logical drives/arrays per controller Up to 8 logical drives ... (uk.adverts.computer)
