freebsd-questions

• Thread Index

---

• Re: hard disk behavior
  • From: jb
• Re: Help compiling ffmpeg from source
  • From: Waitman Gobble
• Re: Help compiling ffmpeg from source
  • From: Andy Wodfer
• Re: Help compiling ffmpeg from source
  • From: Waitman Gobble
• Re: Help compiling ffmpeg from source
  • From: Andy Wodfer
• Re: Help compiling ffmpeg from source
  • From: Waitman Gobble
• Re: Help compiling ffmpeg from source
  • From: Waitman Gobble
• Re: Help compiling ffmpeg from source
  • From: Andy Wodfer
• IGB driver
  • From: Коньков Евгений
• Re: disk labels (was: Re: fixating USB Storage)
  • From: Warren Block
• Re: disk labels (was: Re: fixating USB Storage)
  • From: Warren Block
• Re: VBox network boot
  • From: Carl Johnson
• Re: hard disk behavior
  • From: jb
• Re: hard disk behavior
  • From: jb
• Re: hard disk behavior
  • From: Adam Vande More
• Re: hard disk behavior
  • From: Dmitry S. Kasterin
• Re: hard disk behavior
  • From: Erich Dollansky
• hard disk behavior
  • From: jb
• Re: disk labels (was: Re: fixating USB Storage)
  • From: illoai@xxxxxxxxx
• Re: fixating USB Storage
  • From: Polytropon
• Re: FreeBSD And ARM
  • From: Arthur Chance
• disk labels (was: Re: fixating USB Storage)
  • From: Robert Huff
• FreeBSD And ARM
  • From: Tim Daneliuk
• Re: fixating USB Storage
  • From: Warren Block
• Re: Help compiling ffmpeg from source
  • From: Andy Wodfer
• Re: Help compiling ffmpeg from source
  • From: Da Rock
• Help compiling ffmpeg from source
  • From: Andy Wodfer
• Re: fixating USB Storage
  • From: Robert Huff
• Re: fixating USB Storage
  • From: Maciej Milewski
• Re: request a quote
  • From: Traiano Welcome
• Re: request a quote
  • From: Matthew Seaman
• Re: request a quote
  • From: Damien Fleuriot
• Re: request a quote
  • From: jb
• Re: request a quote
  • From: Matthew Seaman
• Re: request a quote
  • From: Matthew Seaman
• ODP: Re: request a quote
  • From: Mariusz Herman
• Re: request a quote
  • From: Jerome Herman
• Re: request a quote
  • From: Traiano Welcome
• Re: request a quote
  • From: Damien Fleuriot
• request a quote
  • From: Mariusz Herman
• Your message to Carbon-dev awaits moderator approval
  • From: carbon-dev-bounces
• Re: Webcam Selection
  • From: Matthias Apitz
• Wine-fbsd64 updated to 1.4.rc5 (32bit Wine for 64bit FreeBSD)
  • From: David Naylor
• Re: Simple question about pkg_add ...
  • From: Polytropon
• Re: Simple question about pkg_add ...
  • From: David Walker
• Re: DTrace userland
  • From: Marc Abramowitz
• Re: DTrace userland
  • From: Marc Abramowitz
• Re: Delete files let FreeBSD crashes.
  • From: netroby
• Re: VBox network boot
  • From: Warren Block
• Re: Webcam Selection
  • From: Da Rock
• Re: VBox network boot
  • From: Da Rock
• Re: fixating USB Storage
  • From: bsalinux@xxxxxxxxx
• Re: VBox network boot
  • From: Warren Block
• Re: fixating USB Storage
  • From: Maciej Milewski
• Re: fixating USB Storage
  • From: bsalinux@xxxxxxxxx
• Re: fixating USB Storage
  • From: Adam Vande More
• Re: fixating USB Storage
  • From: bsalinux@xxxxxxxxx
• Webcam Selection
  • From: Cy Schubert
• Re: DTrace userland
  • From: Marc Abramowitz
• Re: Is it worthy upgrading to 9.0 ?
  • From: Waitman Gobble
• Re: Is it worthy upgrading to 9.0 ?
  • From: Patrick Lamaiziere
• User disappeared during update error
  • From: Ron (Lists)
• tar --exclude not working
  • From: Peter
• Re: VBox network boot
  • From: Carl Johnson
• Re: zpool not grabbing hot spare
  • From: Randy Schultz
• Re: fixating USB Storage
  • From: Polytropon
• Re: Simple question about pkg_add ...
  • From: Polytropon
• Re: zpool not grabbing hot spare
  • From: Matthew Seaman
• Re: FreeBsd Beginner
  • From: Polytropon
• Re: VBox network boot
  • From: Warren Block
• Re: zpool not grabbing hot spare
  • From: Randy Schultz
• Re: fixating USB Storage
  • From: bsalinux@xxxxxxxxx
• zpool not grabbing hot spare
  • From: Randy Schultz
• Simple question about pkg_add ...
  • From: David Walker
• Re: Is it worthy upgrading to 9.0 ?
  • From: RW
• Re: Is it worthy upgrading to 9.0 ?
  • From: Matthew Seaman
• Re: Is it worthy upgrading to 9.0 ?
  • From: Damien Fleuriot
• Re: Is it worthy upgrading to 9.0 ?
  • From: Stas Verberkt
• VBox network boot
  • From: Da Rock
• Re: posix compliance
  • From: Anton Shterenlikht
• Re: posix compliance
  • From: Jerome Herman
• Re: FreeBsd Beginner
  • From: Matthew Seaman
• Re: Is it worthy upgrading to 9.0 ?
  • From: Erich Dollansky
• Re: posix compliance
  • From: Mark Blackman
• FreeBsd Beginner
  • From: shanib.k.k
• Re: posix compliance
  • From: Da Rock
• Re: posix compliance
  • From: Anton Shterenlikht
• Re: posix compliance
  • From: Jerry
• Re: posix compliance
  • From: Anton Shterenlikht
• Re: posix compliance
  • From: Da Rock
• posix compliance
  • From: Anton Shterenlikht
• Re: "find" not traversing all directories on a single zfs file system
  • From: Matthew Seaman
• Re: Delete files let FreeBSD crashes.
  • From: Damien Fleuriot
• Re: Is it worthy upgrading to 9.0 ?
  • From: Damien Fleuriot
• Delete files let FreeBSD crashes.
  • From: netroby
• Re: DTrace userland
  • From: Marc Abramowitz
• DTrace userland
  • From: Marc Abramowitz
• Re: odd SDcard behaviour in freebsd-9.0-R
  • From: FreeBSD Mailing Lists
• Re: "find" not traversing all directories on a single zfs file system
  • From: Robert Banfield
• Re: "find" not traversing all directories on a single zfs file system
  • From: Robert Banfield
• Installing amanda 3.2 from ports
  • From: Michael L. Squires
• Is it worthy upgrading to 9.0 ?
  • From: sw2wolf
• Re: "find" not traversing all directories on a single zfs file system
  • From: Matthew Seaman
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Jerome Herman
• "find" not traversing all directories on a single zfs file system
  • From: Robert Banfield
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Jerry
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• RE: Email issues, relay failure
  • From: Bender, Chris
• netisr traffic bad distribution between CPUs
  • From: Коньков Евгений
• Re: Cloning a FreeBSD system
  • From: Michael Sierchio
• Re: Current way of downloading sources
  • From: krad
• Re: Cloning a FreeBSD system
  • From: Damien Fleuriot
• Re: clang vs gcc linking problem
  • From: Artifex Maximus
• Re: Cloning a FreeBSD system
  • From: Adam Vande More
• Re: odd SDcard behaviour in freebsd-9.0-R
  • From: Michael Sierchio
• odd SDcard behaviour in freebsd-9.0-R
  • From: John
• Re: Cloning a FreeBSD system
  • From: Damien Fleuriot
• Re: Email issues, relay failure
  • From: Jon Radel
• RE: Email issues, relay failure
  • From: Bender, Chris
• Re: Email issues, relay failure
  • From: Jon Radel
• Cloning a FreeBSD system
  • From: Stephen Cook
• RE: Email issues, relay failure
  • From: Bender, Chris
• Re: Email issues, relay failure
  • From: Jon Radel
• RE: Email issues, relay failure, perhaps Jails is causing it.
  • From: Bender, Chris
• RE: Email issues, relay failure, perhaps Jails is causing it.
  • From: Bender, Chris
• Re: NTP Autokey configuration
  • From: Alexandre
• Re: NTP Autokey configuration
  • From: Paul Macdonald
• NTP Autokey configuration
  • From: Misra, Arindam
• Recurring "rescan already queued" message
  • From: Dmitry S. Kasterin
• Re: 9.0, Samba and two NICs
  • From: Ronny Mandal
• Re: Email issues, relay failure, perhaps Jails is causing it.
  • From: Daniel Staal
• Re: Custom Kernel Target Ignored
  • From: Damien Fleuriot
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Chad Perrin
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Jerome Herman
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Warren Block
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Jerry
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• Re: Custom Kernel Target Ignored
  • From: Erich Dollansky
• RE: Custom Kernel Target Ignored
  • From: Carolyn Longfoot
• kern/94369: [bktr] [patch] Patch to support Leadtek WinFast Tv2000 XP bktr card
  • From: David Walker
• Re: Custom Kernel Target Ignored
  • From: Erich Dollansky
• Re: Custom Kernel Target Ignored
  • From: Da Rock
• Custom Kernel Target Ignored
  • From: Carolyn Longfoot
• Re: Email issues, relay failure, perhaps Jails is causing it.
  • From: Bernt Hansson
• Re: Mapping back gptid -> device
  • From: Dan Nelson
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Jerome Herman
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Da Rock
• Re: clang vs gcc linking problem
  • From: Julian H. Stacey
• RE: Email issues, relay failure, perhaps Jails is causing it.
  • From: Bender, Chris
• Re: Email issues, relay failure
  • From: Bernt Hansson
• RE: Email issues, relay failure
  • From: Bender, Chris
• A problem internal to GDB has been detected
  • From: Коньков Евгений
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• Re: Email issues, relay failure
  • From: Bernt Hansson
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: C. P. Ghost
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• RE: Email issues, relay failure
  • From: Bender, Chris
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Jerry
• Re: Email issues, relay failure
  • From: Bernt Hansson
• RE: Email issues, relay failure
  • From: Bender, Chris
• Re[3]: VERY slow performance on igb+FreeBSD8.2+mpd5.6
  • From: Коньков Евгений
• Re: Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Antonio Olivares
• Re: Email issues, relay failure
  • From: Bernt Hansson
• Installing Samsung CLX-2160 color laser printer on USB using CUPS
  • From: Polytropon
• postfix knowledgable folks
  • From: csbender
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: C. P. Ghost
• Re[8]: high load system do not take all CPU time
  • From: Коньков Евгений
• Re[2]: VERY slow performance on igb+FreeBSD8.2+mpd5.6
  • From: Коньков Евгений
• Re: Email issues, relay failure
  • From: Michael Powell
• Re: Email issues, relay failure
  • From: Jon Radel
• Re: Email issues, relay failure
  • From: Bender, Chris
• Re: Email issues, relay failure
  • From: Jerry
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Joshua Isom
• RE: Email issues, relay failure
  • From: Bender, Chris
• Re: Email issues, relay failure
  • From: Paul Macdonald
• RE: Email issues, relay failure
  • From: Bender, Chris
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: C. P. Ghost
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Daniel Feenberg
• Re: mount options display (detailed)
  • From: jb
• Re: Email issues, relay failure
  • From: Paul Macdonald
• Re: Problems with linprocfs(5) and htop
  • From: Florian Unglaub
• Re: mount options display (detailed)
  • From: Matthew Seaman
• Re: negative group permissions?
  • From: Trond Endrestøl
• clang vs gcc linking problem
  • From: Artifex Maximus
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Da Rock
• Re: phpMyAdmin
  • From: Edgar Rodolfo
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: David Brodbeck
• Re: mount options display (detailed)
  • From: Chris Hill
• Re: Email issues, relay failure
  • From: Chris Hill
• Re: Email issues, relay failure
  • From: Robison, Dave
• Email issues, relay failure
  • From: Bender, Chris
• Re: 8.3-BETA1 installation problem
  • From: Omer Faruk SEN
• Re: Converting C++ to C
  • From: Robert Bonomi
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Jaime Kikpole
• Re: phpMyAdmin
  • From: Matthew Seaman
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Julian H. Stacey
• Re: 8.3-BETA1 installation problem
  • From: Michael Powell
• phpMyAdmin
  • From: alexus
• Re: mount options display (detailed)
  • From: Matthew Seaman
• mount options display (detailed)
  • From: jb
• Re: negative group permissions?
  • From: Matthew Seaman
• Re: 8.3-BETA1 installation problem
  • From: Warren Block
• Re: 9.0, Samba and two NICs
  • From: Da Rock
• Re: negative group permissions?
  • From: Anton Shterenlikht
• Re: Converting C++ to C
  • From: Da Rock
• Re: SMTP error: 552 5.6.0 Headers too large (32768 max)
  • From: Da Rock
• Re: negative group permissions?
  • From: Trond Endrestøl
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Da Rock
• Re: negative group permissions?
  • From: Anton Shterenlikht
• Re: negative group permissions?
  • From: Trond Endrestøl
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Dave
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• Re: negative group permissions?
  • From: Anton Shterenlikht
• Re: Converting C++ to C
  • From: Mehmet Erol Sanliturk
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Jerry
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Julian H. Stacey
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Erich Dollansky
• 9.0, Samba and two NICs
  • From: Ronny Mandal
• Re: Converting C++ to C
  • From: Julian H. Stacey
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Julian H. Stacey
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Dag-Erling Smørgrav
• Re: 8.3-BETA1 installation problem
  • From: Michael Powell
• Re: SMTP error: 552 5.6.0 Headers too large (32768 max)
  • From: Arthur Chance
• Re: Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Dave
• Security? [Re: Why is this Symbol in the front of your website. A humble request.]
  • From: Dave
• Converting C++ to C
  • From: perryh
• Re: negative group permissions?
  • From: Matthew Seaman
• negative group permissions?
  • From: Anton Shterenlikht
• Re: VERY slow performance on igb+FreeBSD8.2+mpd5.6
  • From: Volodymyr Kostyrko
• Re: 8.3-BETA1 installation problem
  • From: Omer Faruk SEN
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Matthew Seaman
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Matthew Seaman
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Odhiambo Washington
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• apache22 + spawn-fcgi + php5
  • From: alexus
• NetAddr/IP.pm, p5-GSSAPI and FreeBSD 7
  • From: Ron (Lists)
• Re: (c)dialog working differently during boot in script called by rc system than after boot?
  • From: Robarrght
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Steve Bertrand
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Erich Dollansky
• Re: SMTP error: 552 5.6.0 Headers too large (32768 max)
  • From: Da Rock
• Re: (c)dialog working differently during boot in script called by rc system than after boot?
  • From: Dan Busarow
• Re: SMTP error: 552 5.6.0 Headers too large (32768 max)
  • From: Daniel Staal
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Mike Jeays
• Re: (c)dialog working differently during boot in script called by rc system than after boot?
  • From: CyberLeo Kitsana
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Lowell Gilbert
• SMTP error: 552 5.6.0 Headers too large (32768 max)
  • From: Julian H. Stacey
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Robison, Dave
• (c)dialog working differently during boot in script called by rc system than after boot?
  • From: Robarrght
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Ismael Farfán
• [no subject]
  • From: Chris Rees
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Jerry
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Joshua Isom
• [no subject]
  • From: Andrey Chernov
• Re: VERY slow performance on igb+FreeBSD8.2+mpd5.6
  • From: Коньков Евгений
• Re: DRI for Radeon HD5450 on FreeBSD 9.0
  • From: Michael Grünewald
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Ireneusz Pluta
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Dag-Erling Smørgrav
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Bernt Hansson
• Re: Why is this Symbol in the front of your website. DO NOT FEED THE TROLL!
  • From: Arthur Chance
• RE: DRI for Radeon HD5450 on FreeBSD 9.0
  • From: Adam K Kirchhoff
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Michelle Konzack
• Re: Why is this Symbol in the front of your website. A humble request.
  • From: Odhiambo Washington
• Why is this Symbol in the front of your website. A humble request.
  • From: Al Hadith
• Re: deleting an alias from interface cause the static route to be deleted
  • From: Gleb Smirnoff
• VERY slow performance on igb+FreeBSD8.2+mpd5.6
  • From: Коньков Евгений
• Re: Hardware compatibility
  • From: Da Rock
• Re: Info and questions about Brother[tm] multifunction machine
  • From: Da Rock
• Re: Hardware compatibility
  • From: Da Rock
• Aha, just thought of a solution.... Games: src for gtk!
  • From: Gary Kline
• Re: How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Michael Powell
• Re: 8.3-BETA1 installation problem
  • From: Michael Powell
• Re: Hardware compatibility
  • From: Jerry
• Re: Installation troubles
  • From: herbert langhans
• Re: where is linux-f10-flashplugin ?
  • From: Vincent Hoffman
• where is linux-f10-flashplugin ?
  • From: Chuck Bacon
• Re: 8.3-BETA1 installation problem
  • From: Warren Block
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Matthew Seaman
• Re: Info and questions about Brother[tm] multifunction machine
  • From: Warren Block
• 8.3-BETA1 installation problem
  • From: Omer Faruk SEN
• Re: Info and questions about Brother[tm] multifunction machine
  • From: Ronald F. Guilmette
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Chuck Swiger
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Jaime Kikpole
• Wine-fbsd64 updated to 1.4.rc4 (32bit Wine for 64bit FreeBSD)
  • From: David Naylor
• RE: How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Joe Moore
• Re: How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Dan Nelson
• Re: How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Lowell Gilbert
• RE: How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Joe Moore
• Re: How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Adam Vande More
• How much space do I need on "/" for a 7.4 to 8 stable upgrade?
  • From: Joe Moore
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Alejandro Imass
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Alejandro Imass
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Matthew Seaman
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Matthew Seaman
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Alejandro Imass
• Re: Installation troubles
  • From: Erich Dollansky
• Re: Installation troubles
  • From: illoai@xxxxxxxxx
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Alejandro Imass
• Re: Installation troubles
  • From: Polytropon
• Re: Installation troubles
  • From: Da Rock
• ps3mediaserver working on FreeBSD?
  • From: Brent Clark
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Matthew Seaman
• Installation troubles
  • From: herbert langhans
• Re: Info and questions about Brother[tm] multifunction machine
  • From: Paul Macdonald
• Re: FreeBsd 8.2 and Hyper-V
  • From: Mehmet Erol Sanliturk
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Jaime Kikpole
• FreeBsd 8.2 and Hyper-V
  • From: Aydın Demirel
• Re: apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: Matthew Seaman
• Re: CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Matthew Seaman
• Re: New iso format on 9.0
  • From: egoitz
• Re: apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: Chuck Swiger
• Re: freebsd package update / upgrade
  • From: Bernt Hansson
• Re: apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: alexus
• Re: apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: Michael Powell
• Re: freebsd package update / upgrade
  • From: alexus
• Re: Info and questions about Brother[tm] multifunction machine
  • From: Ronald F. Guilmette
• Re: apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: alexus
• Re: apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: Chuck Swiger
• apache22 + php5 (package not ports) ~ spawn-fcgi ?
  • From: alexus
• Re: Info and questions about Brother[tm] multifunction machine
  • From: John Levine
• CPAN hanging on ExtUtils::MakeMaker even if installed
  • From: Jaime Kikpole
• Re: One or Four?
  • From: Erich Dollansky
• Re: /usr/home vs /home
  • From: Erich Dollansky
• tnftpd conversions feature
  • From: Daniel Feenberg
• Re: Hardware compatibility
  • From: Da Rock
• Re: Hardware compatibility
  • From: Polytropon
• Re: Info and questions about Brother[tm] multifunction machine
  • From: Da Rock
• Re: Hardware compatibility
  • From: Da Rock
• Info and questions about Brother[tm] multifunction machine
  • From: Ronald F. Guilmette
• Re: Current way of downloading sources
  • From: Fernando Apesteguía
• Re: Current way of downloading sources
  • From: Polytropon
• why 'freebsd-net' does not exists?
  • From: Коньков Евгений
• Re[2]: deleting an alias from interface cause the static route to be deleted
  • From: Коньков Евгений
• Current way of downloading sources
  • From: Fernando Apesteguía
• Re[2]: deleting an alias from interface cause the static route to be deleted
  • From: Коньков Евгений
• Re: One or Four?
  • From: David Brodbeck
• Re: New iso format on 9.0
  • From: Robison, Dave
• Re: CUPS 1.5.2 not working, like to test 1.4.x, how?
  • From: Christopher J. Ruwe
• RE: New iso format on 9.0
  • From: Devin Teske
• Re: New iso format on 9.0
  • From: jb
• RE: New iso format on 9.0
  • From: egoitz
• Re: /usr/home vs /home
  • From: perryh
• RE: New iso format on 9.0
  • From: Devin Teske
• Re: New iso format on 9.0
  • From: jb
• Re: deleting an alias from interface cause the static route to be deleted
  • From: Adam Vande More
• Re: /usr/home vs /home
  • From: Jerry McAllister
• Re: Hardware compatibility
  • From: Polytropon
• Re: /usr/home vs /home
  • From: Polytropon
• Re: New iso format on 9.0
  • From: egoitz
• JAIL - building perl 5.1? fails on 8.2-STABLE
  • From: Damien Fleuriot
• Re: New iso format on 9.0
  • From: Matthew Seaman
• New iso format on 9.0
  • From: egoitz
• Re: /usr/home vs /home
  • From: Robert Bonomi
• Re: /usr/home vs /home
  • From: Erich Dollansky
• Re: /usr/home vs /home
  • From: Erich Dollansky
• Re: deleting an alias from interface cause the static route to be deleted
  • From: Matthew Seaman
• re: advanced programming unix environment (pracct.c:31: error: storage size of 'acdata' isn't known)
  • From: Danilo Almeida
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: Damien Fleuriot
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: peter knezel
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: Damien Fleuriot
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: peter knezel
• Re: deleting an alias from interface cause the static route to be deleted
  • From: Damien Fleuriot
• Re: deleting an alias from interface cause the static route to be deleted
  • From: Matthew Seaman
• Re: deleting an alias from interface cause the static route to be deleted
  • From: Damien Fleuriot
• Re: netmap support in default kernel
  • From: Matthew Seaman
• Re: /usr/home vs /home
  • From: Erich Dollansky
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: Damien Fleuriot
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: peter knezel
• Re: /usr/home vs /home
  • From: Doug Hardie
• Re: /usr/home vs /home
  • From: Chip Camden
• Re: /usr/home vs /home
  • From: Robert Bonomi
• Re: /usr/home vs /home
  • From: Chip Camden
• Re: /usr/home vs /home
  • From: Erich Dollansky
• Re: One or Four?
  • From: Paul Mather
• Re: Hardware compatibility
  • From: Da Rock
• netmap support in default kernel
  • From: Tim Stewart
• Re: CUPS 1.5.2 not working, like to test 1.4.x, how?
  • From: Polytropon
• CUPS 1.5.2 not working, like to test 1.4.x, how?
  • From: Christopher J. Ruwe
• Re: One or Four?
  • From: Robison, Dave
• Re: some problems to enable journaling
  • From: RW
• deleting an alias from interface cause the static route to be deleted
  • From: Коньков Евгений
• Re: Hardware compatibility
  • From: Polytropon
• Re: webcamd and device numbering
  • From: Hans Petter Selasky
• Re: newsyslog-local.conf
  • From: Matthew Seaman
• Re: Hardware compatibility
  • From: Roland Smith
• Re: fvwm-2.6.4 dumps core on 9.0-RELEASE
  • From: Roland Smith
• Re: newsyslog-local.conf
  • From: alexus
• Re: newsyslog-local.conf
  • From: Matthew Seaman
• some problems to enable journaling
  • From: Коньков Евгений
• Re: Problems with linprocfs(5) and htop
  • From: jb
• Re: One or Four?
  • From: Julian H. Stacey
• Hardware compatibility
  • From: Riccardo Garzelli
• Re: newsyslog-local.conf
  • From: alexus
• Re: newsyslog-local.conf
  • From: Matthew Seaman
• Re: One or Four?
  • From: Jerry McAllister
• newsyslog-local.conf
  • From: alexus
• Jumpstart on FreeBSD 9.0
  • From: egoitz
• RE: One or Four?
  • From: Devin Teske
• Re: One or Four?
  • From: Julian H. Stacey
• Re: How to prevent gam_server from running?
  • From: Herbert J. Skuhra
• Re: How to prevent gam_server from running?
  • From: Herbert J. Skuhra
• Re: How to prevent gam_server from running?
  • From: Herbert J. Skuhra
• Problems with linprocfs(5) and htop
  • From: Florian Unglaub
• Re: One or Four?
  • From: Jerry McAllister
• Re: One or Four?
  • From: Jerry McAllister
• Re: htpd going wild
  • From: Damien Fleuriot
• Re: One or Four?
  • From: Jerry McAllister
• Re: /usr/home vs /home
  • From: Da Rock
• htpd going wild
  • From: n dhert
• libxul-1.9.2.27
  • From: n dhert
• Re: Which mailinglist is appropriate for discussing uart changes?
  • From: Julian H. Stacey
• add see also swapinfo to man df
  • From: Julian H. Stacey
• fvwm-2.6.4 dumps core on 9.0-RELEASE
  • From: WATANABE Kazuhiro
• Re: webcamd and device numbering
  • From: Frank Shute
• Re: Which mailinglist is appropriate for discussing uart changes?
  • From: Frank Shute
• Re: DNS - slaving the root zone
  • From: Doug Barton
• Re: Mail
  • From: Odhiambo Washington
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Nikola Pavlović
• Re: Mail
  • From: jb
• Mail
  • From: Daniel Lewis
• Fwd: Mail
  • From: Daniel Lewis
• Re: ps output
  • From: jb
• Re: ps output
  • From: Robert Bonomi
• Which mailinglist is appropriate for discussing uart changes?
  • From: Terrence Koeman
• RE: DNS - slaving the root zone
  • From: Terrence Koeman
• Re: One or Four?
  • From: Julian H. Stacey
• Re: /usr/home vs /home
  • From: parv
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Matthew Seaman
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Nikola Pavlović
• Re: skype
  • From: ajtiM
• Re: One or Four?
  • From: Daniel Staal
• Re: ps output
  • From: Joshua Isom
• Re: One or Four?
  • From: Julian H. Stacey
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Matthew Seaman
• skype
  • From: ajtiM
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: RW
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Leslie Jensen
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: RW
• Re: ps output
  • From: RW
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Erich Dollansky
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Antonio Olivares
• ps output
  • From: jb
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Matthew Seaman
• 9.0 base.txz ftp download time out
  • From: Fbsd8
• Re: One or Four?
  • From: Stephen Cook
• Re: webcamd and device numbering
  • From: Waitman Gobble
• Re: One or Four?
  • From: Erich Dollansky
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: One or Four?
  • From: Carl Johnson
• Re: webcamd and device numbering
  • From: Da Rock
• Re: One or Four?
  • From: Erich Dollansky
• Re: webcamd and device numbering
  • From: Waitman Gobble
• Re: One or Four?
  • From: Erich Dollansky
• webcamd and device numbering
  • From: Da Rock
• Re: One or Four?
  • From: Jerry McAllister
• Re: No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Antonio Olivares
• No updates needed to update system to 8.2-RELEASE-p6 but still on 8.2-RELEASE-p3
  • From: Antonio Olivares
• Re: Is the list down?
  • From: Erich Dollansky
• Re: gpart usage during install
  • From: Michael Powell
• gpart usage during install
  • From: Robert Simmons
• Re: Is the list down?
  • From: Al Plant
• Re: DNS - slaving the root zone
  • From: Doug Barton
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Michael Sierchio
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Daniel Staal
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Matthew Story
• Re: ZFS question
  • From: George Kontostanos
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Michael Sierchio
• Re: One or Four?
  • From: Jerry McAllister
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Jerry McAllister
• Re: Question regarding SPF records
  • From: RW
• Re: Question regarding SPF records
  • From: Jonathan Vomacka
• Re: Question regarding SPF records
  • From: Waitman Gobble
• Question regarding SPF records
  • From: Jonathan Vomacka
• BIND SPF/TXT Questions
  • From: Jonathan Vomacka
• Re: /usr/home vs /home
  • From: Polytropon
• Bridge wired / wireless without hosting the network - is this possible
  • From: Mark Dixon
• Re: /usr/home vs /home
  • From: Da Rock
• Re: One or Four?
  • From: RW
• Re: One or Four?
  • From: Robert Bonomi
• Re: /usr/home vs /home
  • From: Matthew Seaman
• Invitation to Efficient Plant Shutdown & Turnaround Forum 2012 - Kuala Lumpur
  • From: Kyle Law
• Re: /usr/home vs /home
  • From: Da Rock
• Re: /usr/home vs /home
  • From: Matthew Seaman
• Re: Adobe Linux Flash (Success)
  • From: Da Rock
• Re: When I put up any version of FBSD I usually try to install Maxima. Which fails because the sub-install of gnuplot fails.
  • From: Gautham Ganapathy
• Re: Adobe Linux Flash
  • From: sean
• Re: Adobe Linux Flash (Success)
  • From: sean
• add new encryption algorithm to racoon
  • From: aram_baghomian
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Erich Dollansky
• Re: /usr/home vs /home
  • From: Da Rock
• Re: /usr/home vs /home
  • From: Da Rock
• Re: /usr/home vs /home
  • From: Polytropon
• Re: /usr/home vs /home
  • From: Matthew Seaman
• Re: DNS - slaving the root zone
  • From: Damien Fleuriot
• Re: One or Four?
  • From: Damien Fleuriot
• Re: One or Four?
  • From: Damien Fleuriot
• ZFS question
  • From: Denis Fortin
• Re: /usr/home vs /home
  • From: Da Rock
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Polytropon
• Re: /usr/home vs /home
  • From: Polytropon
• Re: One or Four?
  • From: Matthew Seaman
• Re: One or Four?
  • From: Doug Hardie
• Re: One or Four?
  • From: Robert Bonomi
• Re: swap space
  • From: Robert Bonomi
• Re: Adobe Linux Flash
  • From: Robert Bonomi
• Re: One or Four?
  • From: Robert Bonomi
• Re: /usr/home vs /home (was: Re: One or Four?)
  • From: Lars Eighner
• Re: One or Four?
  • From: Leslie Jensen
• Re: /usr/home vs /home
  • From: Da Rock
• /usr/home vs /home (was: Re: One or Four?)
  • From: Daniel Staal
• Re: One or Four?
  • From: Erich Dollansky
• Re: Maildir Format
  • From: John Levine
• Re: One or Four?
  • From: Doug Hardie
• Re: Adobe Linux Flash (Success)
  • From: Frank Shute
• Re: One or Four?
  • From: Da Rock
• Re: One or Four?
  • From: David Brodbeck
• Re: One or Four?
  • From: Chuck Swiger
• RE: One or Four?
  • From: Devin Teske
• RE: One or Four?
  • From: Devin Teske
• Re: One or Four?
  • From: Da Rock
• Re: Adobe Linux Flash (Success)
  • From: Da Rock
• Re: One or Four?
  • From: Da Rock
• RE: One or Four?
  • From: Devin Teske
• Re: Adobe Linux Flash (Success)
  • From: sean
• Re: One or Four?
  • From: Chuck Swiger
• Re: Adobe Linux Flash
  • From: sean
• RE: swap space
  • From: Devin Teske
• Re: One or Four?
  • From: Chris Hill
• RE: One or Four?
  • From: Devin Teske
• Re: swap space
  • From: Robison, Dave
• Re: One or Four?
  • From: Robison, Dave
• Re: swap space
  • From: Jonathan Vomacka
• RE: One or Four?
  • From: Devin Teske
• Re: DNS - slaving the root zone
  • From: Doug Barton
• Re: swap space
  • From: Chuck Swiger
• Re: swap space
  • From: Mike Tancsa
• Re: One or Four?
  • From: Chuck Swiger
• swap space
  • From: Jim Pazarena
• Re: One or Four?
  • From: Da Rock
• Re: One or Four?
  • From: Robison, Dave
• Re: One or Four?
  • From: Polytropon
• Re: One or Four?
  • From: Julian H. Stacey
• RE: One or Four?
  • From: Devin Teske
• Re: One or Four?
  • From: Douglas Carmichael
• Re: One or Four?
  • From: Da Rock
• Re: One or Four?
  • From: Douglas Carmichael
• Re: One or Four?
  • From: Jerry McAllister
• Re: One or Four?
  • From: Jerry McAllister
• Re: One or Four?
  • From: Polytropon
• Re: One or Four?
  • From: Maxim Khitrov
• RE: One or Four?
  • From: Devin Teske
• Re: Maildir Format
  • From: Jerome Herman
• Re: Adobe Linux Flash
  • From: sean
• Re: One or Four?
  • From: Chuck Swiger
• One or Four?
  • From: Robison, Dave
• Re: how can i offload a 600m file without graphic tools?
  • From: Gary Kline
• Re: DNS - slaving the root zone
  • From: Jeremy Chadwick
• Re: Maildir Format
  • From: Joshua Isom
• Re: Maildir Format
  • From: Polytropon
• Cryopid for FreeBSD?
  • From: C. P. Ghost
• Re: Maildir Format
  • From: Bill Campbell
• Re: Maildir Format
  • From: Paul Macdonald
• Re: Maildir Format
  • From: Julian H. Stacey
• Re: Maildir Format
  • From: Daniel Staal
• Maildir Format
  • From: APseudoUtopia
• Re: sysinstall cant seem to download the kernel source.
  • From: Warren Block
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: Processor question
  • From: Erich Dollansky
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: MFC 7840W under CUPS
  • From: Jerry
• Re: Is the list down?
  • From: Erich Dollansky
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: MFC 7840W under CUPS
  • From: Polytropon
• Re: note on my messed up 2003 dell
  • From: J65nko
• DNS - slaving the root zone
  • From: Damien Fleuriot
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: how can i offload a 600m file without graphic tools?
  • From: Polytropon
• Re: MFC 7840W under CUPS
  • From: Polytropon
• program / Project Consultant.
  • From: Thierry Sconetti
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: RW
• program / Project Consultant.
  • From: Thierry Sconetti
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Antonio Olivares
• Re: sysinstall cant seem to download the kernel source.
  • From: RW
• Re: FreeBSD on Dell R210 II With PERC H200 Controllers
  • From: Damien Fleuriot
• Re: sysinstall cant seem to download the kernel source.
  • From: Da Rock
• Re: Technical Support Question
  • From: Da Rock
• sysinstall cant seem to download the kernel source.
  • From: Brent Clark
• Re: FreeBSD on Dell R210 II With PERC H200 Controllers
  • From: Traiano Welcome
• Re: Technical Support Question
  • From: Chip Oakley
• Re: FreeBSD on Dell R210 II With PERC H200 Controllers
  • From: Traiano Welcome
• Re: Technical Support Question
  • From: perryh
• Re: FreeBSD on Dell R210 II With PERC H200 Controllers
  • From: Damien Fleuriot
• Re: fb9 - dmesg - bluetooth and netgraph warnings
  • From: Da Rock
• Re: Google+ install Hangout Voice and Video Plug-in
  • From: Da Rock
• FreeBSD on Dell R210 II With PERC H200 Controllers
  • From: Traiano Welcome
• Google+ install Hangout Voice and Video Plug-in
  • From: The Todds
• fb9 - dmesg - bluetooth and netgraph warnings
  • From: jb
• Re: Adobe Linux Flash
  • From: Boris Samorodov
• Re: note on my messed up 2003 dell
  • From: Jason Garrett
• Website Listing
  • From: info
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: Is the list down?
  • From: Da Rock
• Is the list down?
  • From: Al Plant
• Re: Adobe Linux Flash
  • From: Da Rock
• Re: Adobe Linux Flash
  • From: sean
• note on my messed up 2003 dell
  • From: Gary Kline
• Re: Adobe Linux Flash
  • From: Warren Block
• Re: Adobe Linux Flash
  • From: sean
• Re: Adobe Linux Flash
  • From: Frank Shute
• Re: Technical Support Question
  • From: Da Rock
• Re: Technical Support Question
  • From: Da Rock
• Re: Technical Support Question
  • From: Robert Bonomi
• Adobe Linux Flash
  • From: sean
• Re: Technical Support Question
  • From: Julian H. Stacey
• which media type I must use when booting ISO from grub
  • From: Коньков Евгений
• Re: Technical Support Question
  • From: Chip Oakley
• Re: Technical Support Question
  • From: Adam Vande More
• Re: Technical Support Question
  • From: Chip Oakley
• Re: Technical Support Question
  • From: Julian H. Stacey
• Re: Technical Support Question (fwd)
  • From: Julian H. Stacey
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Antonio Olivares
• Re: Please manually remove me from this mailing list
  • From: hugh
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Ryan Frederick
• Re: [OT] Build deps caching
  • From: Matthew Seaman
• Re: Help! Drive failing in zpool
  • From: Matthew Seaman
• Re: [OT] Build deps caching (was: How to prevent gam_server from running?)
  • From: Nikola Pavlović
• Help! Drive failing in zpool
  • From: Andy Wodfer
• Re: laptop freebsd display not filling whole screen
  • From: Dave
• USA Bulk Email Marketing Company's E-mail Service provides a quick simple way for you to send bulk e-mail.
  • From: massmail servers
• Re: Processor question
  • From: krad
• Re: How to prevent gam_server from running?
  • From: Julian H. Stacey
• Re: Technical Support Question
  • From: Julian H. Stacey
• Re: mlock(2) results in Resource temporarily unavailable on FreeBSD/amd64 9.0-STABLE
  • From: Trond Endrestøl
• mlock(2) results in Resource temporarily unavailable on FreeBSD/amd64 9.0-STABLE
  • From: Trond Endrestøl
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: Damien Fleuriot
• Re: How to prevent gam_server from running?
  • From: Matthew Seaman
• Wine-fbsd64 updated to 1.4.rc3 (32bit Wine for 64bit FreeBSD)
  • From: David Naylor
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Antonio Olivares
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Robert Bonomi
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Antonio Olivares
• Re: fixit disc for 7.3 #1?
  • From: Gary Kline
• Re: /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Ryan Frederick
• Re: How to prevent gam_server from running?
  • From: Nikola Pavlović
• /lib/exec/ld-elf.so.1: Shared object "libpcre.so.0" not found, required by "libxfsm-4.6.so.0" amd64 FreeBSD 8.2
  • From: Antonio Olivares
• Re: Technical Support Question
  • From: Robert Bonomi
• Re: How to prevent gam_server from running?
  • From: Steve Bertrand
• Re: How to prevent gam_server from running?
  • From: Warren Block
• Re: How to prevent gam_server from running?
  • From: Conrad J. Sabatier
• Re: Technical Support Question
  • From: Da Rock
• Please manually remove me from this mailing list
  • From: Troy
• Re: Technical Support Question
  • From: Warren Block
• Re: Technical Support Question
  • From: Da Rock
• Re: File manager for Xfce
  • From: Da Rock
• Re: How to prevent gam_server from running?
  • From: Steve Bertrand
• DRI for Radeon HD5450 on FreeBSD 9.0
  • From: Michael Grünewald
• How to prevent gam_server from running?
  • From: Conrad J. Sabatier
• Re: File manager for Xfce
  • From: Rares Aioanei
• Technical Support Question
  • From: Chip Oakley
• Re: File manager for Xfce
  • From: Fritz Wuehler
• Re: File manager for Xfce
  • From: Mike Jeays
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Joshua Isom
• Re: File manager for Xfce
  • From: Per olof Ljungmark
• Re: File manager for Xfce
  • From: Waitman Gobble
• Fwd: [Daniel Shahaf: Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade]
  • From: Daniel Shahaf
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: peter knezel
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: George Kontostanos
• File manager for Xfce
  • From: Per olof Ljungmark
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: Damien Fleuriot
• 9.0-RELEASE: Strange freezing and kernel panics on laptop
  • From: Ramiro Caso
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Joshua Isom
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: George Kontostanos
• About your company
  • From: TradeKey . com
• re. laptop freebsd display not filling whole screen
  • From: herbert langhans
• 8.2-RELEASE sysinstall creates duplicate rc.conf lines
  • From: Rick Miller
• Re: laptop freebsd display not filling whole screen
  • From: kron
• Re: laptop freebsd display not filling whole screen
  • From: Da Rock
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: George Kontostanos
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: George Kontostanos
• Re: laptop freebsd display not filling whole screen
  • From: Da Rock
• laptop freebsd display not filling whole screen
  • From: Fbsd8
• Re: fixit disc for 7.3 #1?
  • From: Dave
• Re: fixit disc for 7.3 #1?
  • From: Da Rock
• Re: fixit disc for 7.3 #1?
  • From: Gary Kline
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Staal
• Re: fixit disc for 7.3 #1?
  • From: Da Rock
• Re: fixit disc for 7.3 #1?
  • From: Gary Kline
• Re: zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Sergio de Almeida Lenzi
• Re: FreeBSD / Gnome / Audio
  • From: Da Rock
• Re: fixit disc for 7.3 #1?
  • From: Da Rock
• Re: FreeBSD / Gnome / Audio
  • From: RW
• zroot won't mount after 9.0-RC2 -> 9.0-RELEASE upgrade
  • From: Daniel Shahaf
• FreeBSD / Gnome / Audio
  • From: Tim Gustafson
• fixit disc for 7.3 #1?
  • From: Gary Kline
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Lowell Gilbert
• Re: Printing directly to IP address
  • From: perryh
• Re: Processor question
  • From: Nerius Landys
• Re: Processor question
  • From: Mihai Donțu
• Re: Processor question
  • From: Matthew Seaman
• Re: Printing directly to IP address
  • From: Robison, Dave
• Re: Processor question
  • From: Matthew Seaman
• RE: Processor question
  • From: Sean Cavanaugh
• Re: Processor question
  • From: Frank Shute
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: krad
• Re: Printing directly to IP address
  • From: John Levine
• Re: Processor question
  • From: krad
• Re: USB 3 / eSATA support
  • From: Dean E. Weimer
• Processor question
  • From: Mike Dockery
• Printing directly to IP address
  • From: Jerry
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: C. P. Ghost
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Waitman Gobble
• Satoshi our apologies
  • From: admin@xxxxxxxxxxxxxxx
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Mike Kelly
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Lowell Gilbert
• 9.0-RELEASE: Strange freezing and kernel panics on laptop
  • From: Ramiro Caso
• net/ifstated does not compile on 9.0-RELEASE/amd64
  • From: Hugo Silva
• Re: Using sendmail as a client with auth
  • From: Nikola Pavlović
• Re: Using sendmail as a client with auth
  • From: Trond Endrestøl
• Re: Using sendmail as a client with auth
  • From: Trond Endrestøl
• Re: Can clang compile RELENG_9?
  • From: krad
• Re: Using sendmail as a client with auth
  • From: Matthew Seaman
• Re: Using sendmail as a client with auth
  • From: Matthew Seaman
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: _
• Re: Linux compatibility
  • From: Joshua Isom
• Re: Using sendmail as a client with auth
  • From: Josh Tolbert
• how to find cause of crash?
  • From: Коньков Евгений
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Adam Vande More
• Re: Using sendmail as a client with auth
  • From: Bernt Hansson
• Re: Using sendmail as a client with auth
  • From: Bernt Hansson
• RE: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Pegasus Mc Cleaft
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: _
• Re: corrupted tar.gz archive - I lost my backups :)/:(
  • From: APseudoUtopia
• RE: corrupted tar.gz archive - I lost my backups :)/:(
  • From: Pegasus Mc Cleaft
• Re: 'rm' Can not delete files
  • From: Karl Vogel
• corrupted tar.gz archive - I lost my backups :)/:(
  • From: _
• Re: Installing Gnome and Xorg from installation DVD
  • From: Matthew Seaman
• anyone familiar with cyrus-sasl2? Allocating sasl connection state: generic failure
  • From: Per olof Ljungmark
• anyone familiar with cyrus-sasl2? Allocating sasl connection state: generic failure
  • From: Per olof Ljungmark
• Installing Gnome and Xorg from installation DVD
  • From: Arif Hossain
• Re: how can i offload a 600m file without graphic tools?
  • From: Robert Bonomi
• Re: how can i offload a 600m file without graphic tools?
  • From: Leonardo M. Ramé
• how can i offload a 600m file without graphic tools?
  • From: Gary Kline
• Re: vdevs in zpool spereated, unable to import
  • From: Daniel Staal
• Re: vdevs in zpool spereated, unable to import
  • From: Daniel Staal
• kernel: panic: handle_written_inodeblock
  • From: Vince Valenti
• Re: Linux compatibility
  • From: siefke@xxxxxxxx
• Re: Linux compatibility
  • From: siefke_listen@xxxxxx
• Re: Using sendmail as a client with auth
  • From: Nikola Pavlović
• vdevs in zpool spereated, unable to import
  • From: Adam Coates
• Re: Looking for SEO / Website Design Work
  • From: Jonathan Vomacka
• Looking for SEO / Website Design Work
  • From: Shrikansh
• Re: Using sendmail as a client with auth
  • From: Matthew Seaman
• vdevs in zpool spereated, unable to import
  • From: Adam Coates
• Using sendmail as a client with auth
  • From: Bernt Hansson
• Re: Linux compatibility
  • From: Matthew Seaman
• Re: Linux compatibility
  • From: Dave
• Re: replacing a kernel module located in installation Dvd
  • From: Omer Faruk SEN
• Re: replacing a kernel module located in installation Dvd
  • From: Omer Faruk SEN
• Re: Linux compatibility
  • From: Da Rock
• Linux compatibility
  • From: siefke_listen@xxxxxx
• Re: Regarding MANCOLOR
  • From: Ruslan Ermilov
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: MFC 7840W under CUPS
  • From: Jerry
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: MFC 7840W under CUPS
  • From: Jerry
• Re: graphics tablets
  • From: Peter Vereshagin
• Re: Can't build en-freebsd-doc-20120205
  • From: Mike Clarke
• update, [solved]: journal timestamp
  • From: Darrel
• Re: MFC 7840W under CUPS
  • From: Polytropon
• Re: Can clang compile RELENG_9?
  • From: Michael Powell
• Re: Can clang compile RELENG_9?
  • From: Dennis Glatting
• Can clang compile RELENG_9?
  • From: Dennis Glatting
• kernel "double fault"
  • From: Коньков Евгений
• Can't build en-freebsd-doc-20120205
  • From: Mike Clarke
• Question about kernel panic
  • From: BBLister
• replacing a kernel module located in installation Dvd
  • From: Omer Faruk SEN
• Re: 'rm' Can not delete files
  • From: Daniel Staal
• Re: 'rm' Can not delete files
  • From: RW
• Re: Wireless Problem
  • From: Jerry
• Re: 'rm' Can not delete files
  • From: Matthew Seaman
• Re: 'rm' Can not delete files
  • From: perryh
• Re: 'rm' Can not delete files
  • From: perryh
• ACK/NAK timeout
  • From: bsalinux@xxxxxxxxx
• Re: 'rm' Can not delete files
  • From: andrew clarke
• Re: Wireless Problem
  • From: Waitman Gobble
• Wireless Problem
  • From: zaklinaczcipek128
• Re: Removal of content from the mailing list
  • From: Modulok
• Re: Removal of content from the mailing list
  • From: Jerry McAllister
• Removal of content from the mailing list
  • From: yt
• Re: 'rm' Can not delete files
  • From: Randal L. Schwartz
• Re[2]: 'rm' Can not delete files
  • From: Коньков Евгений
• Re: Kernel Panic on 9.0-RELEASE When Attempting to Remove Files
  • From: Ryan Frederick
• Kernel Panic on 9.0-RELEASE When Attempting to Remove Files
  • From: Ryan Frederick
• Re: Removal Attempt of Directory under ZFS causes Kernel Panic
  • From: Martin McCormick
• Re: Removal Attempt of Directory under ZFS causes Kernel Panic
  • From: Daniel Staal
• istgt sessions / connections
  • From: Mark Felder
• Removal Attempt of Directory under ZFS causes Kernel Panic
  • From: Martin McCormick
• Re: FreeBSD 9, GPT and gmirror
  • From: Janos Dohanics
• Re: FreeBSD 9, GPT and gmirror
  • From: Janos Dohanics
• Re: Resetting RAID1 drive as Non-RAID
  • From: Joshua Isom
• Re: 'rm' Can not delete files
  • From: Matthew Seaman
• Re: 'rm' Can not delete files
  • From: Jerry McAllister
• Re: 'rm' Can not delete files
  • From: Matthew Seaman
• Re: 'rm' Can not delete files
  • From: Matthew Story
• Re: 'rm' Can not delete files
  • From: Matthew Story
• Re: 'rm' Can not delete files
  • From: Da Rock
• Re: 'rm' Can not delete files
  • From: Henry Olyer
• Resetting RAID1 drive as Non-RAID
  • From: Robert Fitzpatrick
• UTF-8 Support broken from ports update
  • From: Love von Melen Ekman
• Subscriber, We're giving away photo paper with every order!
  • From: Printer Cartridges Please
• Re: portshaker, listing updates and skipping broken/removed ports
  • From: Frank Staals
• Re: How to create 2 versions of a port
  • From: Matthew Seaman
• Re: How to create 2 versions of a port
  • From: Doug Barton
• How to create 2 versions of a port
  • From: Fbsd8
• portshaker, listing updates and skipping broken/removed ports
  • From: Antonio Olivares
• one question about Freebsd subversion access log
  • From: Yiru Li
• Re: FreeBSD 9, GPT and gmirror
  • From: Michael Cardell Widerkrantz
• Re: Driver for Intel 82579V
  • From: Gaurang Pandya
• Re: lost network connections
  • From: Conrad J. Sabatier
• freebsd-questions
  • From: Dmitry Vasilyev
• Re: lost network connections
  • From: Matthew Seaman
• lost network connections
  • From: Dmitry Vasilyev
• lost network connections
  • From: Dmitry Vasilyev
• system reboot yielding no coredump
  • From: Volodymyr Kostyrko
• Re: fbsd safety of the ports
  • From: Daniel Staal
• RE: mps driver overwrite using loader.conf
  • From: Desai, Kashyap
• Re: FreeBSD 9, GPT and gmirror
  • From: perryh
• Re: fbsd safety of the ports
  • From: perryh
• Re: 'rm' Can not delete files
  • From: andrew clarke
• /dev/ulpt0 -- How is it created?
  • From: Robert Huff
• RE: /dev/ulpt0 -- How is it created?
  • From: Devin Teske
• /dev/ulpt0 -- How is it created?
  • From: Ronald F. Guilmette
• Re: gpt zfs raidz1 boot failure
  • From: Chris Jones
• Re: Kamailio Sip Server Port Makefile
  • From: Roland Smith
• Re: Asymmetric NFS Performance
  • From: Dan Nelson
• Re: FreeBSD 9, GPT and gmirror
  • From: Gary Aitken
• Re: inetd[1081]: ssh/tcp: bind: address already in use
  • From: Chuck Swiger
• Re: gpt zfs raidz1 boot failure
  • From: George Kontostanos
• inetd[1081]: ssh/tcp: bind: address already in use
  • From: Henry Olyer
• Re: FreeBSD 9, GPT and gmirror
  • From: George Kontostanos
• Re: FreeBSD 9, GPT and gmirror
  • From: Bas Smeelen
• FreeBSD 9, GPT and gmirror
  • From: Janos Dohanics
• Re: 'rm' Can not delete files
  • From: Robert Huff
• Re: 'rm' Can not delete files
  • From: CyberLeo Kitsana
• Re: APC UPS Trip Lite - usb device keeps disconnecting
  • From: Matt Mullins
• Re: 'rm' Can not delete files
  • From: David Brodbeck
• Re: fbsd safety of the ports
  • From: David Brodbeck
• APC UPS Trip Lite - usb device keeps disconnecting
  • From: jbiskofski
• Re: gpt zfs raidz1 boot failure
  • From: Chris Jones
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Warren Block
• [solved]: journal timestamp
  • From: Darrel
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: pkg_rmleaves in FreeBSD 9
  • From: David Demelier
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Robert Bonomi
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Robert Bonomi
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Robert Bonomi
• Re: Need Help with a Raid 1 Time critical issue.
  • From: Andrey V. Elsukov
• package install problem on 9.0
  • From: Gary Aitken
• pkg_rmleaves in FreeBSD 9
  • From: Kevin Zheng
• package install problem on 9.0
  • From: Gary Aitken
• Re: Need Help with a Raid 1 Time critical issue.
  • From: Warren Block
• Swapping geli devices between machines: MD5 hash mismatch
  • From: Jan Henrik Sylvester
• Re: fbsd safety of the ports
  • From: mikel king
• Re: Software Development using Freebsd.
  • From: Jorge Biquez
• Re: How to build 9.0 from source?
  • From: illoai@xxxxxxxxx
• Need Help with a Raid 1 Time critical issue.
  • From: Morris Allen
• Re: fbsd safety of the ports
  • From: Daniel Staal
• Re: 'rm' Can not delete files
  • From: Modulok
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: Software Development using Freebsd.
  • From: C. P. Ghost
• Re: Usage of '@cwd' and '@srcdir' in a package list
  • From: Da Rock
• Re: 'rm' Can not delete files
  • From: RW
• Re: 'rm' Can not delete files
  • From: Randal L. Schwartz
• Kamailio Sip Server Port Makefile
  • From: Serhat Akca
• Re: 'rm' Can not delete files
  • From: CK
• Re: fbsd safety of the ports
  • From: mikel king
• Re: fbsd safety of the ports
  • From: David Brodbeck
• Re: 'rm' Can not delete files
  • From: Ingo Hofmann
• Re: 'rm' Can not delete files
  • From: Andre Goree
• Re[2]: 'rm' Can not delete files
  • From: Коньков Евгений
• Re: 'rm' Can not delete files
  • From: Matthew Seaman
• Re: 'rm' Can not delete files
  • From: Rares Aioanei
• Re: 'rm' Can not delete files
  • From: Randal L. Schwartz
• 'rm' Can not delete files
  • From: Коньков Евгений
• Re: on hammer's, security, and centrifuges...
  • From: Roland Smith
• Re: Mergemaster
  • From: krad
• Re: Querying a cvsup server
  • From: Rob Farmer
• Re: software raid
  • From: Warren Block
• Usage of '@cwd' and '@srcdir' in a package list
  • From: Patrick Mahan
• Re: Dump Restore on ZFS root system
  • From: Warren Block
• Re: print/cups: CUPS-1.5.0 IPP protocoll issues -> no printing possible on IPP capable network printers
  • From: Warren Block
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: peter knezel
• Re: Software Development using Freebsd.
  • From: Patrick Lamaiziere
• Wine-fbsd64 updated to 1.4.rc2 (32bit Wine for 64bit FreeBSD)
  • From: David Naylor
• Re: Software Development using Freebsd.
  • From: Nikola Pavlović
• Re: software raid
  • From: Modulok
• Re: Querying a cvsup server
  • From: Warren Block
• software raid
  • From: Jim Pazarena
• Re: Software Development using Freebsd.
  • From: Waitman Gobble
• Driver for Intel 82579V
  • From: Gaurang Pandya
• Re: Dump Restore on ZFS root system
  • From: Fritz Wuehler
• Re: Dump Restore on ZFS root system
  • From: Dick Hoogendijk
• Re: From analysis of a simple ifstated.conf to more compex example
  • From: Damien Fleuriot
• Re: Dump Restore on ZFS root system
  • From: Michael Sierchio
• Re: Querying a cvsup server
  • From: Lowell Gilbert
• Re: on hammer's, security, and centrifuges...
  • From: Frank Shute
• From analysis of a simple ifstated.conf to more compex example
  • From: peter knezel
• Re: Dump Restore on ZFS root system
  • From: William Brown
• Re: Dump Restore on ZFS root system
  • From: George Kontostanos
• Re: on hammer's, security, and centrifuges...
  • From: Damien Fleuriot
• Re: on hammer's, security, and centrifuges...
  • From: Steve Bertrand
• Re: on hammer's, security, and centrifuges...
  • From: kron
• Re: Software Development using Freebsd.
  • From: Rod Person
• Re: Kernel stalling at "pci0: <ACPI bus> on pcib0"
  • From: Erich Dollansky
• Re: on hammer's, security, and centrifuges...
  • From: Damien Fleuriot
• on hammer's, security, and centrifuges...
  • From: Henry Olyer
• Re: Dump Restore on ZFS root system
  • From: dick
• Re: Dump Restore on ZFS root system
  • From: Vincent Hoffman
• Dump Restore on ZFS root system
  • From: dick
• Re: print/cups: CUPS-1.5.0 IPP protocoll issues -> no printing possible on IPP capable network printers
  • From: Da Rock
• print/cups: CUPS-1.5.0 IPP protocoll issues -> no printing possible on IPP capable network printers
  • From: O. Hartmann
• Re: Kernel stalling at "pci0: <ACPI bus> on pcib0"
  • From: Da Rock
• impossible? postfix filter && partial virtual domain mailboxes
  • From: Da Rock
• Re: Kernel stalling at "pci0: <ACPI bus> on pcib0"
  • From: Erich Dollansky
• Kernel stalling at "pci0: <ACPI bus> on pcib0"
  • From: Will McCutcheon
• Re: Software Development using Freebsd.
  • From: Da Rock
• Re: Software Development using Freebsd.
  • From: Chad Perrin
• Re: Software Development using Freebsd.
  • From: Randal L. Schwartz
• Re: Software Development using Freebsd.
  • From: C. P. Ghost
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: Software Development using Freebsd.
  • From: Da Rock
• Re: Debug Brother MFC-9560CDW failure to print
  • From: Da Rock
• Re: Software Development using Freebsd.
  • From: Leonardo M. Ramé
• Re: Software Development using Freebsd.
  • From: Frank Shute
• Re: Software Development using Freebsd.
  • From: Mehmet Erol Sanliturk
• Re: Querying a cvsup server
  • From: Conrad J. Sabatier
• Re: Software Development using Freebsd.
  • From: Rod Person
• Re: Mergemaster
  • From: Conrad J. Sabatier
• Re: where is plig.net
  • From: Chris Whitehouse
• Re: Software Development using Freebsd.
  • From: Adam Vande More
• Re: Software Development using Freebsd.
  • From: Chad Perrin
• Re: Software Development using Freebsd.
  • From: William Brown
• Re: Software Development using Freebsd.
  • From: David Hughes
• Re: where is plig.net
  • From: Mark Blackman
• Software Development using Freebsd.
  • From: Jorge Biquez
• where is plig.net
  • From: Chris Whitehouse
• Re: Querying a cvsup server
  • From: Warren Block
• Re: ath and how to control wireless light
  • From: Waitman Gobble
• Re: pxeboot.bs and vlan tagging
  • From: Erik Nørgaard
• Re: Querying a cvsup server
  • From: Lowell Gilbert
• Re: pxeboot.bs and vlan tagging
  • From: Rick Miller
• Re: Multiple errors on server -- Where do I start looking?
  • From: Chuck Swiger
• Re: ntpd crashes during start - a lot of interfaces
  • From: Chuck Swiger
• Re: pxeboot.bs and vlan tagging
  • From: Rick Miller
• Re: fbsd safety of the ports
  • From: Mark Felder
• fbsd safety of the ports
  • From: dick
• Re: pxeboot.bs and vlan tagging
  • From: Erik Nørgaard
• Multiple errors on server -- Where do I start looking?
  • From: Ryan Merrell
• Re: pxeboot.bs and vlan tagging
  • From: Rick Miller
• Re: pxeboot.bs and vlan tagging
  • From: Erik Nørgaard
• Re: pxeboot.bs and vlan tagging
  • From: Rick Miller
• Re: USB 3 / eSATA support
  • From: RW
• Re: pxeboot.bs and vlan tagging
  • From: Erik Nørgaard
• pxeboot.bs and vlan tagging
  • From: Rick Miller
• Re: Add to vendors list
  • From: Steve Bertrand
• Re: MFC 7840W under CUPS
  • From: Da Rock
• Re: Add to vendors list
  • From: legolas
• Add to vendors list
  • From: Matthijs Openneer
• Re: MFC 7840W under CUPS
  • From: Jerry
• ntpd crashes during start - a lot of interfaces
  • From: Radek Krejča
• Querying a cvsup server
  • From: Warren Block
• Re: Mergemaster
  • From: Warren Block
• Mergemaster
  • From: Net Warrior
• Re: Mailing list recommend
  • From: Da Rock
• Re: Mailing list recommend
  • From: Jerry McAllister
• Re: ath and how to control wireless light
  • From: Chris Whitehouse
• Re: setuid directories - or other option?
  • From: Dan Nelson
• Re: How to build 9.0 from source?
  • From: Warren Block
• Moving boot/root disk in 9.0
  • From: james
• Mailing list recommend
  • From: Graham Bentley
• Re: MFC 7840W under CUPS
  • From: Da Rock
• MFC 7840W under CUPS
  • From: Ouyang Xueyu
• Re: setuid directories - or other option?
  • From: Dan Nelson
• Re: How to build 9.0 from source?
  • From: Warren Block
• Status of PUFFS for FreeBSD ???
  • From: Jukka A. Ukkonen
• Re: How to build 9.0 from source?
  • From: Outback Dingo
• How to build 9.0 from source?
  • From: james
• cvsup10.freebsd.org seems broken
  • From: Brian Behlendorf
• Re: libXext fails to build on 9.0-RELEASE/amd64
  • From: 1126
• Re: faxgetty 100%
  • From: Gabri Mate
• Re: FreeBSD custom CD and extra files to be included in the iso
  • From: Amitabh Kant
• Re: HowTo easy use IPFW
  • From: Коньков Евгений
• Re: libXext fails to build on 9.0-RELEASE/amd64
  • From: Martin Wilke
• Re: HowTo easy use IPFW
  • From: Kevin Oberman
• Re: HowTo easy use IPFW
  • From: Julian Elischer
• Re: HowTo easy use IPFW
  • From: Julian Elischer
• gpt zfs raidz1 boot failure
  • From: Chris Jones
• Can I use qjail on FreeBSD 9.0?
  • From: masayoshi
• Re: Jails V2, VIMAGE, and integration in the base system
  • From: Devin Teske
• Re: Jails V2, VIMAGE, and integration in the base system
  • From: Hugo Silva
• Re: ath and how to control wireless light
  • From: Waitman Gobble
• Re: the WD USB 3.0 "My Book" Essential
  • From: Roland Smith
• Re: ath and how to control wireless light
  • From: Waitman Gobble
• Re: ath and how to control wireless light
  • From: Waitman Gobble
• Re: FreeBSD custom CD and extra files to be included in the iso
  • From: Devin Teske
• setuid directories - or other option?
  • From: Modulok
• Re: fixating USB Storage
  • From: Mike Clarke
• Re: the WD USB 3.0 "My Book" Essential
  • From: Thomas Mueller
• Re: ath and how to control wireless light
  • From: Chris Whitehouse
• Re: fixating USB Storage
  • From: Jonathan Vomacka
• Re: fixating USB Storage
  • From: Mike Clarke
• Re: FreeBSD custom CD and extra files to be included in the iso
  • From: Amitabh Kant
• FreeBSD custom CD and extra files to be included in the iso
  • From: Amitabh Kant
• Re: ath and how to control wireless light
  • From: Waitman Gobble
• Re: fixating USB Storage
  • From: Conrad J. Sabatier
• Re: USB 3 / eSATA support
  • From: Dean E. Weimer
• Re: USB 3 / eSATA support
  • From: RW
• Re: Jails V2, VIMAGE, and integration in the base system
  • From: Fbsd8
• Re: the WD USB 3.0 "My Book" Essential
  • From: Henry Olyer
• Re: USB 3 / eSATA support
  • From: John Levine
• Re: USB 3 / eSATA support
  • From: Mike Tancsa
• Re: USB 3 / eSATA support
  • From: Dean E. Weimer
• Re: Possible move back to FreeBSD
  • From: 1126
• support for amd vision graphics card
  • From: Sergio de Almeida Lenzi
• RE: Jails V2, VIMAGE, and integration in the base system
  • From: Devin Teske
• Jails V2, VIMAGE, and integration in the base system
  • From: Hugo Silva
• Re: USB 3 / eSATA support
  • From: Mike Tancsa
• USB 3 / eSATA support
  • From: Dean E. Weimer
• Re: FreeBSD 9 buildworld with clang failure
  • From: Dean E. Weimer
• Re: mail server config
  • From: Edwin L. Culp W.
• Re: the WD USB 3.0 "My Book" Essential
  • From: Thomas Mueller
• Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem
  • From: Erich Dollansky
• Fwd: the WD USB 3.0 "My Book" Essential
  • From: Henry Olyer
• Re: Possible move back to FreeBSD
  • From: Chris
• Re: Possible move back to FreeBSD
  • From: Adam Vande More
• Re: Possible move back to FreeBSD
  • From: Erich Dollansky
• Re: Possible move back to FreeBSD
  • From: Chris
• Re: Possible move back to FreeBSD
  • From: Chris
• Re: Possible move back to FreeBSD
  • From: Erich Dollansky
• Re: Possible move back to FreeBSD
  • From: mikel king
• Possible move back to FreeBSD
  • From: Chris
• Re: freebsd package update / upgrade
  • From: Erich Dollansky
• the WD USB 3.0 "My Book" Essential
  • From: Henry Olyer
• freebsd package update / upgrade
  • From: alexus
• Re: fixating USB Storage
  • From: bsalinux@xxxxxxxxx
• fixating USB Storage
  • From: bsalinux@xxxxxxxxx
• Re: mail server config
  • From: Paul Schmehl
• Re: OT: Slackware: Starting Servers at Boot
  • From: Nikola Pavlović
• Re: mail server config
  • From: Walt Elam
• mail server config
  • From: AN
• Re: OT: Slackware: Starting Servers at Boot
  • From: Waitman Gobble
• Re: OT: Slackware: Starting Servers at Boot
  • From: Chris Maness
• Re: OT: Slackware: Starting Servers at Boot
  • From: Noel
• Re: OT: Slackware: Starting Servers at Boot
  • From: Waitman Gobble
• OT: Slackware: Starting Servers at Boot
  • From: Chris Maness
• Re: FreeBSD 9 buildworld with clang failure
  • From: illoai@xxxxxxxxx
• Re: OpenMP on FreeBSD
  • From: Dennis Glatting
• Please confirm your email for 775HipHop.com's list
  • From: 775HipHop.com
• FreeBSD 9 buildworld with clang failure
  • From: Dean E. Weimer
• Re: Unable to upgrade packages on FreeBSD
  • From: Eduardo Morras
• Re: uname ?
  • From: Yuri Pankov
• Re: uname ?
  • From: Chad Perrin
• Asymmetric NFS Performance
  • From: Tim Daneliuk
• Re: HowTo easy use IPFW
  • From: Jerry
• Re: HowTo easy use IPFW
  • From: Jason Hellenthal
• Re: Clang and ports
  • From: Pierre-Luc Drouin
• Re: Fixating boot drive
  • From: Warren Block
• ath and how to control wireless light
  • From: Chris Whitehouse
• Re: Unable to upgrade packages on FreeBSD
  • From: Waitman Gobble
• Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem
  • From: Erich Dollansky
• Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem
  • From: Erich Dollansky
• Re: Unable to upgrade packages on FreeBSD
  • From: Bernt Hansson
• Re: carp+devd+ifstated on master problem
  • From: peter knezel
• Re: carp+devd+ifstated on master problem
  • From: peter knezel
• Re: carp+devd+ifstated on master problem
  • From: Damien Fleuriot
• Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem
  • From: Erich Dollansky
• Re: some kind of binary sed(1) command
  • From: Nikos Vassiliadis
• Re: carp+devd+ifstated on master problem
  • From: peter knezel
• help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem
  • From: Subhasish Chakraborty
• Re: OpenMP on FreeBSD
  • From: Anton Shterenlikht
• Re: some kind of binary sed(1) command
  • From: Robert Bonomi
• HowTo easy use IPFW
  • From: Коньков Евгений
• Re: Clang and ports
  • From: Matthew Seaman
• Re: some kind of binary sed(1) command
  • From: Matthias Apitz
• Re: Clang and ports
  • From: Conrad J. Sabatier
• Re: some kind of binary sed(1) command
  • From: Robert Bonomi
• Clang and ports
  • From: Joshua Isom
• Re: limit on PV entries
  • From: Conrad J. Sabatier
• Re: Fixating boot drive
  • From: Joshua Isom
• uname ?
  • From: joeb1
• Fixating boot drive
  • From: bsalinux@xxxxxxxxx
• Re: Identifying at jobs
  • From: Dan Nelson
• some kind of binary sed(1) command
  • From: Matthias Apitz
• Identifying at jobs
  • From: Toomas Aas
• Practical Management for Plant Turnarounds
  • From: Kyle Law
• Re: OpenMP on FreeBSD
  • From: Dennis Glatting
• OpenMP on FreeBSD
  • From: Anton Shterenlikht
• libXext fails to build on 9.0-RELEASE/amd64
  • From: 1126
• 2Wire Router and Host Discovery
  • From: Chris Maness
• Re: Securely sharing directories between jails
  • From: Roland Smith
• Re: Unable to upgrade packages on FreeBSD
  • From: David Jackson
• Re: Unable to upgrade packages on FreeBSD
  • From: David Jackson
• Re: Unable to upgrade packages on FreeBSD
  • From: David Jackson
• Re: no borders with firefox, terminal (xfce on FreeBSD 9.0 amd64 STABLE)
  • From: Volodymyr Kostyrko
• Re: no borders with firefox, terminal (xfce on FreeBSD 9.0 amd64 STABLE)
  • From: Erich Dollansky
• Re: no borders with firefox, terminal (xfce on FreeBSD 9.0 amd64 STABLE)
  • From: Antonio Olivares
• Re: carp+devd+ifstated on master problem
  • From: Damien Fleuriot
• carp+devd+ifstated on master problem
  • From: peter knezel
• carp+devd+ifstated on master problem
  • From: peter knezel
• faxgetty 100%
  • From: mailinglist
• Re: limit on PV entries
  • From: Julien Cigar
• Re:[SOLVED] bash LC_COLLATE or LC_ALL set “C” not sort in dictionary order.
  • From: Edward Martinez
• limit on PV entries
  • From: n dhert
• Re: Unable to upgrade packages on FreeBSD
  • From: Eduardo Morras
• Securely sharing directories between jails
  • From: Stas Verberkt
• Re: no borders with firefox, terminal (xfce on FreeBSD 9.0 amd64 STABLE)
  • From: Erich Dollansky
• no borders with firefox, terminal (xfce on FreeBSD 9.0 amd64 STABLE)
  • From: Antonio Olivares
• Re: Support Issue 164620
  • From: Yuri Pankov
• Re: Support Issue 164620
  • From: Nikola Pavlović
• Support Issue 164620
  • From: Morris Allen

• Security
• UNIX
• Linux
• Coding
• Usenet

• Mailing-Lists
• Newsgroups
• About
• Privacy
• Search
• Imprint

unix.derkeiler.com  > Mailing-Lists  > FreeBSD  > questions  > 2012-02