'vinum list' wierd output

From: Joan Picanyol i Puig (lists-freebsd-stable_at_biaix.org)
Date: 06/29/03

  • Next message: Greg 'groggy' Lehey: "Re: 'vinum list' wierd output"
    Date: Sun, 29 Jun 2003 02:57:09 +0200
    To: freebsd-stable@freebsd.org
    
    
    

    Hi,

    I'm not sure this is supposed to happen (my computer rebooted halfway
    through adding an other drive to a volume):

    [long lines needed]

    (02:44:50 <~>) 0 $ sudo vinum ld
    D storage State: up Device /dev/ad0d Avail: 38166/381 66 MB (100%)
    D worthless State: up Device /dev/ad2d Avail: 38038/380 38 MB (100%)
    D barracuda State: up Device /dev/da0e Avail: 1279/1280 MB (100%)
    D barracudaf State: up Device /dev/da0f Avail: 7210/7210 MB (100%)
    D ultrastar State: up Device /dev/da1e Avail: 1279/1280 MB (100%)
    D ultrastarf State: up Device /dev/da1f Avail: 7210/7210 MB (100%)

    Do I really have 12 drives? I've seen vinum saying -2 drives!

    (02:44:53 <~>) 0 $ sudo vinum list | head
    12 drives:
    D storage State: up Device /dev/ad0d Avail: 38166/381 66 MB (100%)
    D worthless State: up Device /dev/ad2d Avail: 38038/380 38 MB (100%)
    D barracuda State: up Device /dev/da0e Avail: 1279/1280 MB (100%)
    D barracudaf State: up Device /dev/da0f Avail: 7210/7210 MB (100%)
    D ultrastar State: up Device /dev/da1e Avail: 1279/1280 MB (100%)
    D ultrastarf State: up Device /dev/da1f Avail: 7210/7210 MB (100%)
        
    I'm trying to add a 40 GB drive ('storage') to 'bulk' (see attached output for
    reference), but I'd rather wait for some comments on my "12 drives".

    What should I do to make vinum reasonable again?

    tks

    -- 
    pica
    
    
    
    
    
    

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"






  • Next message: Greg 'groggy' Lehey: "Re: 'vinum list' wierd output"

    Relevant Pages

    • Re: etch install partitioner fails, no CD
      ... > Next it did not know where to look for install media. ... > autopartitioner again. ... > P4, APIC, SiS chip set, ATA drives, one per cable. ... > with a subject of "unsubscribe". ...
      (Debian-User)
    • Re: quickly partition disk, copy an image, install grub
      ... >> workstations without cd drives. ... > Have you looked at System Installation Suite? ... > Mount Holyoke College ... > with a subject of "unsubscribe". ...
      (Debian-User)
    • Re: mount USB drive at boot: fsck failure
      ... The POST bomb did happen only once, ... Are the USB drivers not loading in time? ... drives at boot? ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
      (Debian-User)
    • Re: mdadm raid5 giving me heartburn.....
      ... looks like you lost some of your mirror sets, ... Plus sdb seems to have failed in the raid5. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ... drives and 2 400 gig sata drives. ...
      (Debian-User)
    • Re: BIOS limit with old laptop.
      ... maybe http/sql/ftp if i use really lightweight stuff ... Or do i need to fiddle with BIOS limits and ... drives to get to the capacity you need. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
      (Debian-User)