Recent -STABLE panics during boot (100% reproducable)

From: Dmitry Sivachenko (demon_at_freebsd.org)
Date: 09/05/03

  • Next message: Art Mason: "PF in 4.8-STABLE" 
    Date: Fri, 5 Sep 2003 17:38:00 +0400
To: stable@freebsd.org

    Hello!

    Using very recent -STABLE we encounter the following panic during boot:

    <snip>
    ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
    Waiting 5 seconds for SCSI devices to settle
    SMP: AP CPU #1 Launched!
    panic: malloc(M_WAITOK) in interrupt context
    mp_lock = 00000001; cpuid = 0; lapic.id = 00000000
    boot() called on cpu#0

    syncing disks...

    This is 100% reproducable on two different machines.
    I am providing our kernel config file below. If we remove two
    INVARIANTS-related options, the panic goes away.

    machine i386
    cpu I586_CPU
    cpu I686_CPU
    ident GENERIC
    maxusers 0

    makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
    options INVARIANTS
    options INVARIANT_SUPPORT

    options INET #InterNETworking
    options FFS #Berkeley Fast Filesystem
    options FFS_ROOT #FFS usable as root device [keep this!]
    options SOFTUPDATES #Enable FFS soft updates support

    options UFS_DIRHASH

    options PROCFS #Process filesystem
    options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
    options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
    options UCONSOLE #Allow users to grab the console
    options USERCONFIG #boot -c editor
    options VISUAL_USERCONFIG #visual boot -c editor

    options NMBCLUSTERS=12000

    options SMP # Symmetric MultiProcessor Kernel
    options APIC_IO # Symmetric (APIC) I/O

    options P1003_1B
    options _KPOSIX_PRIORITY_SCHEDULING
    options _KPOSIX_VERSION=199309L

    options HZ=100

    device isa
    device pci

    device fdc0 at isa? port IO_FD1 irq 6 drq 2
    device fd0 at fdc0 drive 0

    device ahc0 # AHA2940 and onboard AIC7xxx devices
    device ahc1 # AHA2940 and onboard AIC7xxx devices

    device scbus # SCSI bus (required)
    device da # Direct Access (disks)
    device scbus0 at ahc0 bus 0 # Single bus device
    device cd # CD

    device pass

    device atkbdc0 at isa? port IO_KBD
    device atkbd0 at atkbdc? irq 1 flags 0x1
    device psm0 at atkbdc? irq 12

    device vga0 at isa?

    device sc0 at isa? flags 0x100

    device npx0 at nexus? port IO_NPX irq 13

    device sio0 at isa? port IO_COM1 flags 0x10 irq 4
    device sio1 at isa? port IO_COM2 irq 3

    device ppc0 at isa? irq 7
    device ppbus # Parallel port bus (required)

    device miibus # MII bus support
    device fxp # Intel EtherExpress PRO/100B (82557, 82558)

    pseudo-device loop # Network loopback
    pseudo-device ether # Ethernet support
    pseudo-device pty # Pseudo-ttys (telnet etc)
    pseudo-device vn

    pseudo-device bpf 2 #Berkeley packet filter

    device smbus # Bus support, required for smb below.
    device intpm
    device ichsmb
    device smb

    options ICMP_BANDLIM
    options IPFIREWALL #firewall
    options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
    options IPFIREWALL_FORWARD #enable transparent proxy support
    options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
    options IPDIVERT #divert sockets
    options IPFW2

    options MAXDSIZ="(1024*1024*1024)"
    options DFLDSIZ="(1024*1024*1024)"

    options INCLUDE_CONFIG_FILE

    Full boot output:

    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 4.9-PRERELEASE #0: Fri Sep 5 16:55:35 MSD 2003
        andy@west.demos.su:/mnt/obj/usr/src/sys/MX1
    Timecounter "i8254" frequency 1193182 Hz
    CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1266.07-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
      Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
    real memory = 1073676288 (1048512K bytes)
    avail memory = 1042145280 (1017720K bytes)
    Programming 16 pins in IOAPIC #0
    IOAPIC #0 intpin 2 -> irq 0
    Programming 16 pins in IOAPIC #1
    FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
     cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
     cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
     io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
     io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
    Preloaded elf kernel "kernel" at 0xc02db000.
    Pentium Pro MTRR support enabled
    Using $PIR table, 9 entries at 0xc00f5250
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
    IOAPIC #1 intpin 4 -> irq 2
    IOAPIC #1 intpin 6 -> irq 5
    IOAPIC #1 intpin 15 -> irq 9
    pci0: <PCI bus> on pcib0
    pci0: <ATI Mach64-GR graphics accelerator> at 3.0 irq 2
    fxp0: <Intel 82559 Pro/100 Ethernet> port 0xc000-0xc03f mem 0xfe300000-0xfe3fffff,0xfe6fd000-0xfe6fdfff irq 5 at device 4.0 on pci0
    fxp0: Ethernet address 00:30:48:23:9e:df
    inphy0: <i82555 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    fxp1: <Intel 82559 Pro/100 Ethernet> port 0xc400-0xc43f mem 0xfe500000-0xfe5fffff,0xfe6fe000-0xfe6fefff irq 9 at device 6.0 on pci0
    fxp1: Ethernet address 00:30:48:23:9e:e0
    inphy1: <i82555 10/100 media interface> on miibus1
    inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
    isa0: <ISA bus> on isab0
    pci0: <Unknown PCI ATA controller> at 15.1
    pci0: <OHCI USB controller> at 15.2 irq 0
    pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
    IOAPIC #1 intpin 8 -> irq 10
    IOAPIC #1 intpin 12 -> irq 11
    pci1: <PCI bus> on pcib1
    fxp2: <Intel 82558 Pro/100 Ethernet> port 0xe400-0xe41f mem 0xfea00000-0xfeafffff,0xfbdff000-0xfbdfffff irq 10 at device 1.0 on pci1
    fxp2: Ethernet address 00:50:8b:02:2c:80
    inphy2: <i82555 10/100 media interface> on miibus2
    inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 11 at device 3.0 on pci1
    aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
    orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
    pmtimer0 on isa0
    fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model NetMouse/NetScroll Optical, device ID 0
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/8 bytes threshold
    APIC_IO: Testing 8254 interrupt delivery
    APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
    APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
    ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
    Waiting 5 seconds for SCSI devices to settle
    SMP: AP CPU #1 Launched!
    panic: malloc(M_WAITOK) in interrupt context
    mp_lock = 00000001; cpuid = 0; lapic.id = 00000000
    boot() called on cpu#0

    syncing disks...
    done
    Uptime: 8s
    Automatic reboot in 15 seconds - press a key on the console to abort
    --> Press a key on the console to reboot,
    --> or switch off the system now.
    Rebooting...
    cpu_reset called on cpu#0
    cpu_reset: Stopping other CPUs
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Art Mason: "PF in 4.8-STABLE"

    Relevant Pages

    • Re: Recent -STABLE panics during boot (100% reproducable)
      ... testers needed for CAM INVARIANTS fix ... >Waiting 5 seconds for SCSI devices to settle ... >Full boot output: ... >686-class CPU) ...
      (freebsd-stable)
    • Re: WinCE boot from RAM with Lauterbach trace32
      ... Reset the CPU and break at 0x0 ... The problem to boot eboot and WinCE6.0 from RAM using Lauterbach Trace32 ...
      (microsoft.public.windowsce.embedded)
    • OpenBSD 3.9 and simh.
      ... I'm trying to install OpenBSD on Simh. ... panic: cannot mount root ... set cpu conhalt ... ;; has been attached and the default boot device set ...
      (comp.unix.bsd.openbsd.misc)
    • Re: WinXP freezes but mouse still OK
      ... if Idle < 50, you are waiting for CPU, as hogged by something ... but disable all non-MS services in MSConfig ... but F8 "Plain VGA" boot ... but F8 "Safe Mode Command Only" boot ...
      (microsoft.public.windowsxp.general)
    • Re: Any ideas - PC stopped POSTing/booting
      ... waiting the usual boot time I found it had not booted. ... wouldn't have noticed any beeps or lack of beeps. ... I have overnighted the identical mobo and CPU from NewEgg and I ... The drives are irrelevant since I cannot get anything even with just ...
      (alt.comp.periphs.mainboard.asus)