Re: 4.9: ata1-slave glitch causes hangs on rebooting
From: Dorin H. (dhogea_at_yahoo.com)
Date: 10/29/03
- Previous message: Andy Gilligan: "Re: ipfw segfaults on 4.9-STABLE (??)"
- Maybe in reply to: Jeff Mitchell: "4.9: ata1-slave glitch causes hangs on rebooting"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 28 Oct 2003 16:49:08 -0800 (PST) To: jam6@cec.wustl.edu
Hi Jeff,
IMHO, there is not always a direct connection
between the displayed message and problematic
device(different initialization latencies). For
example pccard on my laptop: I got them after the
login prompt is displayed :)
Try also a "boot -v", maybe you can pinpoint the
problem. Did 4.8 work on your lap? Maybe you should
include the ata0: ata1: displayed messages (got while
you do a cold boot) to your question.
Good luck
/Dorin.
--- jam6@cec.wustl.edu wrote:
> Dorin--
>
> My laptop has both a serial port and a parallel
> port. I initially had
> parallel port support in my kernel, and when it was
> in there it was being
> loaded after sio1. When this was the case, the
> bootup never froze after
> sio1, but it would instead freeze after the parallel
> port info lines...and
> again just before the ata-slave1 line. So I may try
> taking out serial
> port support fully but I don't at all think that is
> the problem, because
> it constantly freezes before the ata-slave1 line,
> and does not seem to
> depend on what exactly is immediately before it.
>
> When I remove the serial port and recompile I'll let
> you know how it turns
> out, but in the meantime if you have any other ideas
> they'd be
> appreciated.
>
> Thanks,
> Jeff
>
>
> > --- Jeff Mitchell <jam6@cec.wustl.edu> wrote:
> >> As it's a laptop I don't really know what the
> jumper
> >> settings are on the ATA
> >> devices. I've looked in the BIOS but there's no
> >> information in there
> >> either.
> >>
> >
> > <snip>
> >
> > Could it be the sio1? I would remove it or
> disabled it
> > from kernel. In my case, my Toshiba laptop
> doesn't
> > have serial/parallel ports and always hangs while
> > booting. Disabling those solved all my problem,
> though
> > if you do have a second serial port, your problem
> > could be different. 2c.
> > /Dorin.
> >
> >
> >
> > =====
> > /Dorin.
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> > http://sitebuilder.yahoo.com
> >
>
=====
/Dorin.
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
- Previous message: Andy Gilligan: "Re: ipfw segfaults on 4.9-STABLE (??)"
- Maybe in reply to: Jeff Mitchell: "4.9: ata1-slave glitch causes hangs on rebooting"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
