Re: ppp(8) v. 3.1 : PPPoE lqr problem.

From: Michael Nottebrock (michaelnottebrock_at_gmx.net)
Date: 11/24/03

  • Next message: Mike Tancsa: "Re: ppp(8) v. 3.1 : PPPoE lqr problem." 
    To: Mike Tancsa <mike@sentex.net>, Artur Pydo <artur@pydo.org>, freebsd-stable@freebsd.org
Date: Mon, 24 Nov 2003 17:25:19 +0100

    On Monday 24 November 2003 17:07, Mike Tancsa wrote:
    > At 10:59 AM 24/11/2003, Michael Nottebrock wrote:
    > >On Monday 24 November 2003 16:46, Mike Tancsa wrote:
    > > > Are you sure you actually connect to an ERX on the other end, and its
    > > > actually negotiating LQR ? e.g. if you add LQM to the logging section,
    > > > do you see
    > > > tun0: LQM: deflink: Will send LQR every 10.00 secs
    > > > or do you see
    > > > tun0: LQM: deflink: LQR/ECHO LQR not negotiated
    > >
    > >Yes.
    > >
    > >LQM: deflink: Will send LQR every 30.00 secs
    > >
    > >I even found this way back in my ppp.log:
    > >Phase: deflink: ** Too many LQR packets lost **
    > >
    > >So it's actually doing what it should. :)
    >
    > But is it doing that because its never hearing the LQR reply ?

    Yes. ppp nicely detects when they're up and fuzzing with the AC again.

    > And for
    > sure its an ERX on the other end ?

    Actually it's an NRP - it seems Cisco does a better job with their PPPoE
    implementation. 

    -- 
   ,_,   | Michael Nottebrock               | lofi@freebsd.org
 (/^ ^\) | FreeBSD - The Power to Serve     | http://www.freebsd.org
   \u/   | K Desktop Environment on FreeBSD | http://freebsd.kde.org

  • Next message: Mike Tancsa: "Re: ppp(8) v. 3.1 : PPPoE lqr problem."

    Relevant Pages

    • Re: PPPoE problem: "Too many LQR packets lost"
      ... On Saturday, 24th July 2004, Mike Tancsa wrote: ... >>I found Mike Tancsa's patch but didn't like it. ... It works by switching from LQR to simple ... I think I would have just taken your hack if it had been in lqr_Setup ...
      (freebsd-net)
    • Re: PPPoE problem: "Too many LQR packets lost"
      ... >FreeBSD's pppoe is going through a little development at the moment.. ... Simple LCP echos work just fine, but when using LQR things "break". ... There are debug logs posted in the archives when I first figured out ... To unsubscribe, ...
      (freebsd-net)
    • Re: PPPoE problem: "Too many LQR packets lost"
      ... Mike Tancsa wrote: ... >>FreeBSD's pppoe is going through a little development at the moment.. ... >There are debug logs posted in the archives when I first figured out ... the pppoe module ...
      (freebsd-net)