sil 0680 RAID 1

From: Bognár Zsolt (zsozso_at_vfemail.net)
Date: 11/25/03

  • Next message: Chris Howells: "Re: sil 0680 RAID 1" 
    To: freebsd-stable@freebsd.org
Date: Tue, 25 Nov 2003 11:49:36 +0100

    I purchased a Sil680 IDE RAID controller, and have setup a mirrored RAID
    array.
    My problem is, FreeBSD 4.8 and 4.9 GENERIC does not recognize them as one
    disk.
    I checked the hardware notes, and "Sil680 UDMA6" is listed.

    I have one ad4 and one ad6 disk. (I can see same partition and data on both
    of them)
    Finally, the mirroring works fine but if the ad4 disk goes wrong, the BSD
    can't mount the root disk from ad6.(boot is OK)

    Is there anyway to get the FreeBSD to recognize my RAID array?

    Thanks

    Zsolt Bognar

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Chris Howells: "Re: sil 0680 RAID 1"

    Relevant Pages

    • Re: RAID0 problem array broken
      ... I am also having this problem under FreeBSD 5.3. ... First, the two SATAs are supposed to be a RAID0 array, but FreeBSD does ... ata6-master UDMA100<< Thats one of the drives for the RAID, ... In FreeBSD 4.x, the IDE RAID works fine, but I cant get the SATA Raid to ...
      (freebsd-questions)
    • Re: RAID0, SiI 3112 A on FreeBSD
      ... > two SATA drives attached to onboard SiI 3112A RAID controller from ... > are there but this does not count as full RAID support, ... I could not access that array using FreeBSD 5.3 either. ... As told you before SiI 3112A RAID is not supported by FreeBSD in the ...
      (comp.unix.bsd.freebsd.misc)
    • Re: RAID on HP ML110 G5
      ... I have just configured a ML110G5 with FreeBSD 7 a few days ago. ... to make a BIOS RAID (create an array in RAID controller BIOS), ...
      (freebsd-questions)
    • Re: RAID on HP ML110 G5
      ... to this list that the ML110 series is FreeBSD friendly, but what about RAID 1 using the on-board SATA controller? ... FreeBSD will use its own metadata format for the array and will ...
      (freebsd-questions)
    • Re: sil 0680 RAID 1
      ... > I purchased a Sil680 IDE RAID controller, and have setup a mirrored RAID ... > Finally, the mirroring works fine but if the ad4 disk goes wrong, the BSD ... > Is there anyway to get the FreeBSD to recognize my RAID array? ...
      (freebsd-stable)