da doesn't attach to usb memory card

From: Marton Kenyeres (mkenyeres_at_konvergencia.hu)
Date: 11/26/03

  • Next message: Claus Assmann: "Re: NFS/Sendmail issue since upgrading to 4.9-STABLE" 
    To: freebsd-stable@FreeBSD.org
Date: Wed, 26 Nov 2003 17:14:34 +0100

    Hi all,

    I'm playing with a usb memory card (aka. pen drive) which identifies itself
    as:

    /kernel: umass0: Intelligent Stick Intelligent Stick, rev 1.10/1.00, addr 2

    My current system is 4.9-STABLE built from todays sources. The problem is that
    allthough the umass driver attaches to the device, da does not.

    # camcontrol devlist
    <USB Card Intelligent Stic 2.02> at scbus0 target 0 lun 0 (pass0)

    No sign of da0 in dmesg either :/

    If I issue a camcontrol rescan command only thing I get is:

    /kernel: umass0: BBB reset failed, TIMEOUT
    /kernel: umass0: BBB bulk-in clear stall failed, TIMEOUT
    /kernel: umass0: BBB bulk-out clear stall failed, TIMEOUT

    repeating endlessly.

    Strange enough the same device did show up as da0 with a 4.9-RC kernel built
    on October 20th:

    /kernel: da0 at umass-sim0 bus 0 target 0 lun 0
    /kernel: da0: <USB Card Intelligent Stic 2.02> Removable Direct Access SCSI-2
    device
    /kernel: da0: 650KB/s transfers
    /kernel: da0: 127MB (260800 512 byte sectors: 64H 32S/T 127C)

    It even worked if I booted with the device plugged in.

    I can test any patches/provide more info on request. Any ideas, RTFMs, hints
    wellcome.

    Cheers, 

    -- 
Marton Kenyeres - mkenyeres@konvergencia.hu
KVG Konvergencia Kft.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
  • Next message: Claus Assmann: "Re: NFS/Sendmail issue since upgrading to 4.9-STABLE"

    Relevant Pages