RE: 4.9 Stable Crashes on SuperMicro with SMP

From: Jonathan Gilpin (jonathan_at_fluent.ltd.uk)
Date: 11/26/03

  • Next message: Claus Assmann: "Re: NFS/Sendmail issue since upgrading to 4.9-STABLE" 
    To: <freebsd-bugs@freebsd.org>, <freebsd-stable@freebsd.org>
Date: Wed, 26 Nov 2003 22:35:49 -0000

    Further Crashes as reported before:

    FreeBSD sproggit.fluent.ltd.uk 4.9-STABLE FreeBSD 4.9-STABLE #8: Wed Nov 26 19:48:53 GMT 2003 root@sproggit.fluent.ltd.uk:/usr/src/sys/compile/SPROGGIT i386

    and it is a supermicro. I have a Dual Xeon System with 2GB of RAM:

    The machine crashes within 30 minutes with errors as follows:

    Fatal trap 12: page fault while in kernel mode
    mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
    fault virtual address = 0x5
    fault code = supervisor read, page not present
    instruction pointer = 0x8:0xc03a5c7f
    stack pointer = 0x10:0xe5036edc
    frame pointer = 0x10:0xe5036edc
    code segment = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
    processor eflags = interrupt enabled, resume, IOPL = 0
    current process = 787 (httpd)
    interrupt mask = net tty bio cam < SMP: XXX
    trap number = 12
    panic: page fault
    mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
    boot called on cpu#0

    syncing disks...

    I am willing to provide any further infomation needed and if this is not the right place to request help please redirect me.

    Many Thanks,

    Jonathan

    The DMESG is:

    sproggit# dmesg
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 4.9-STABLE #8: Wed Nov 26 19:48:53 GMT 2003
        root@sproggit.fluent.ltd.uk:/usr/src/sys/compile/SPROGGIT
    Timecounter "i8254" frequency 1193182 Hz
    CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2400.11-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
    real memory = 2147418112 (2097088K bytes)
    avail memory = 2088071168 (2039132K bytes)
    Programming 16 pins in IOAPIC #0
    IOAPIC #0 intpin 2 -> irq 0
    Programming 16 pins in IOAPIC #1
    Programming 16 pins in IOAPIC #2
    Programming 16 pins in IOAPIC #3
    FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
     cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
     cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
     io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec00000
     io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000
     io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000
     io3 (APIC): apic id: 11, version: 0x000f0011, at 0xfec03000
    Preloaded elf kernel "kernel" at 0xc0388000.
    Warning: Pentium 4 CPU: PSE disabled
    Pentium Pro MTRR support enabled
    Using $PIR table, 11 entries at 0xc00f4fd0
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
    IOAPIC #1 intpin 12 -> irq 2
    IOAPIC #1 intpin 10 -> irq 9
    IOAPIC #1 intpin 13 -> irq 10
    IOAPIC #1 intpin 1 -> irq 11
    pci0: <PCI bus> on pcib0
    em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xe000-0xe03f mem 0xfeb60000-0xfeb7ffff irq 2 at device 8.0 on pci0
    em0: Speed:N/A Duplex:N/A
    em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xe400-0xe43f mem 0xfeba0000-0xfebbffff irq 9 at device 9.0 on pci0
    em1: Speed:N/A Duplex:N/A
    pci0: <ATI Mach64-GR graphics accelerator> at 11.0 irq 10
    atapci0: <Generic PCI ATA controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata1: at 0x170 irq 15 on atapci0
    ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at device 15.2 on pci0
    usb0: OHCI version 1.0, legacy support
    usb0: SMM does not respond, resetting
    usb0: <OHCI (generic) USB controller> on ohci0
    usb0: USB revision 1.0
    uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 4 ports with 4 removable, self powered
    isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0
    isa0: <ISA bus> on isab0
    pcib255: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
    pci255: <PCI bus> on pcib255
    pcib1: <Host to PCI bridge> on motherboard
    pci1: <PCI bus> on pcib1
    orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff on isa0
    pmtimer0 on isa0
    fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: failed to get data.
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model IntelliMouse Explorer, device ID 4
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    APIC_IO: Testing 8254 interrupt delivery
    APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
    APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
    SMP: AP CPU #1 Launched!
    ad1: 32253MB <Maxtor 6E040L0> [65531/16/63] at ata0-slave BIOSDMA
    ad3: 32253MB <Maxtor 6E040L0> [65531/16/63] at ata1-slave BIOSDMA
    Mounting root from ufs:/dev/ad1s1a
    WARNING: / was not properly dismounted
    em0: Link is up 100 Mbps Full Duplex
    Limiting closed port RST response from 201 to 200 packets per second

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Claus Assmann: "Re: NFS/Sendmail issue since upgrading to 4.9-STABLE"

    Relevant Pages

    • Keyboard error IBM xSeries 335
      ... Keyboard work fine at the boot manager but died as soon FreeBSD ... CPU: IntelXeonCPU 2.80GHz ... on motherboard ... pci0: <PCI bus> on pcib0 ...
      (freebsd-stable)
    • 4.9 Stable Crashes on SuperMicro with SMP
      ... CPU: IntelXeonCPU 2.40GHz ... Programming 16 pins in IOAPIC #0 ... FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs ... pci255: <PCI bus> on pcib255 ...
      (freebsd-stable)
    • CPU1 never used despite HTT?
      ... I am running a Xeon with hyperthreading support. ... the second CPU is indeed launched. ... FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs ... pci0: <PCI bus> on pcib0 ...
      (freebsd-stable)
    • Re: BIOS setup utility locks up
      ... the BIOS setup screen, normally while trying to correct the BIOS ... Would this indicate a screwed Motherboard? ... Make sure your CPU fan is clean and running. ... Check the "push pins" to see if they're secure. ...
      (microsoft.public.windowsxp.general)
    • Re: bge drivers does not work for 3COM 3C996-SX / 3C996B-T
      ... CPU: IntelXeonCPU 3.06GHz ... FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs ... <Host to PCI bridge> on motherboard ... pci0: <PCI bus> on pcib0 ...
      (freebsd-stable)