Re: bge drivers does not work for 3COM 3C996-SX / 3C996B-T

From: Hideki Yamamoto (hyama_at_acm.org)
Date: 12/29/03

  • Next message: Vinod Kashyap: "RE: official 3ware support ?" 
    Date: Tue, 30 Dec 2003 05:38:58 +0900 (JST)
To: stable@freebsd.org

    Hi,

    I added code to recognize 3com 1000base-SX card as miibus and
    compiled them, but I do not have time to test yet.
    I think this may solove my original problem that link of SUN SX card
    does not go up, though 3com card goes up well.

    I will start testing it from Jan.4,2004. I uploaded the fixed code
    on my web page, http://members.aol.com/hyama99/.

    I appreciate If someone gives me comments on the code before testing.

    Date: Mon, 29 Dec 2003 19:16:15 +0900 (JST)
    >
    > Dear Peters
    >
    > > > >
    > > > > bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
    > > > > 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1 bge0: Ethernet
    > > > > address: 00:04:76:e1:06:cf
    > > >
    > > > No miibus or PHY on bge0?
    > >
    > > Sorry, I cannot answer because my knowledge is not sufficient.
    >
    > Neither PHY nor miibus exist on bge0 and bge2.
    > Both bge0 and bge2 are SX cards. The following is the full dmesg.
    > bge1 and bge3 have miibus and phy.

    > ------------------------------------------------------------
    > bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1
    > bge0: Ethernet address: 00:04:76:e1:06:cf
    > bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 11 at device 2.0 on pci1
    > bge1: Ethernet address: 00:0b:cd:d2:b0:40
    > miibus0: <MII bus> on bge1
    > brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
    > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
    > bge2: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ff0000-0xf7ffffff irq 15 at device 1.0 on pci4
    > bge2: Ethernet address: 00:0a:5e:1d:83:25
    > bge3: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7fe0000-0xf7feffff irq 16 at device 2.0 on pci4
    > bge3: Ethernet address: 00:0b:cd:d2:b0:3b
    > miibus1: <MII bus> on bge3
    > brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
    > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
    > bge0: gigabit link up
    > bge2: gigabit link up
    > ------------------------------------------------------------

    Regards,

    Hideki Yamamoto
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Vinod Kashyap: "RE: official 3ware support ?"

    Relevant Pages