Re: X11 with nvidia --> panic

From: Raphael H. Becker (Raphael.Becker_at_gmx.de)
Date: 02/23/04

  • Next message: Phil Rosenthal: ">2GB Bugs still exist in FreeBSD 4.9 ?"
    Date: Mon, 23 Feb 2004 23:16:11 +0100
    To: stable@freebsd.org
    
    
    

    On Mon, Feb 23, 2004 at 12:07:53AM +0100, Karel J. Bosschaart wrote:
    > On Sun, Feb 22, 2004 at 03:21:45PM +0100, Raphael H. Becker wrote:
    > > X11 starts but the console does not switch to graphics mode, it "hangs"
    > > at the startup messages. As you can see in the dmesg-File (2 reboots!)
    > > the end of the 2nd session ends with a kernel panic I didn't see on the
    > > console.

    > There are quite some ways to use the nvidia driver. Difficult to
    > say which one is suited for you, you have to try different things
    > and keep the one that does not crash the machine :-/.

    > if you built the nvidia driver with default options (nvidia agp),
    > comment out agp in your kernel config and comment the agp entry in
    > loader.conf (although it might work when both agp's are loaded).

    That helped. Thanks!

    The only thing that works is to completely disable all AGB relevant
    things, modules and kernel options and rebuild the x11/nvidia-driver
    without any AGP-options. Maybe ther's a conflict with SMP/HTT ?

    You may find some additional infos unter
    http://rhb.uugrn.org/temp/FreeBSD/daemon/

    The files located under http://rhb.uugrn.org/temp/X11-nvidia/ are the
    same like before it worked.

    Regards

    -- 
    Raphael Becker                                     http://rhb.uugrn.org/
                                http://schnitzelmitkartoffelsalat.uugrn.org/
    .........|.........|.........|.........|.........|.........|.........|..
    
    



  • Next message: Phil Rosenthal: ">2GB Bugs still exist in FreeBSD 4.9 ?"

    Relevant Pages

    • Re: TuxRacer now SLOOOOWWWW
      ... Check your kernel config. ... > the agp modules), ... The around the mention of agp make it look like you only mention it ... chipset and a Radeon 7000 card. ...
      (comp.os.linux.setup)
    • Re: TuxRacer now SLOOOOWWWW
      ... Check your kernel config. ... > the agp modules), ... The around the mention of agp make it look like you only mention it ... chipset and a Radeon 7000 card. ...
      (comp.os.linux.misc)
    • Re: lost /dev/agpgart , X11 confused.
      ... >> chipset, ... > Yeah, my X server seems upset about it, all right. ... > Am I not loading a module or device in my kernel config? ... For i915 systems some people have hacked vga_pci.c to always add an "agp" ...
      (freebsd-current)
    • Re: 2.6.0-test1 + matroxfb = unuusable VC
      ... >> initiate any AGP transfers. ... In this case, does it happen if you exit X, or only if you are switching ... to the console while X are active? ... inactive (Gnome1 clock applet running in top right corner was known to ...
      (Linux-Kernel)
    • Re: 2.6.0-test1 + matroxfb = unuusable VC
      ... > - Right after switching from X to a text console, ... 2.4's with agp turned on, where turning off agp sorted out the issue. ... matroxfb: Matrox G400 detected ... switching to colour frame buffer device 160x64 ...
      (Linux-Kernel)