Re: HEADSUP.. USB MFC coming..

From: Dmitry Morozovsky (marck_at_rinet.ru)
Date: 02/28/04

  • Next message: Mark Knight: "Re: umount induced panic" 
    Date: Sun, 29 Feb 2004 00:54:33 +0300 (MSK)
To: Julian Elischer <julian@elischer.org>

    On Fri, 27 Feb 2004, Julian Elischer wrote:

    JE> I plan to commit the MFC at http://www.josef-k.net/freebsd/
    JE> (the latest one) in the next couple of days. If you really care about
    JE> USB in 4.10 you might do well to test this on your equipment,
    JE> ESPECIALLY if you have unusual devices. Let me know of both successes
    JE> and failures please.. If I hear nothing I won't know if it's because
    JE> no-one tested it or it was just without problems..
    JE>
    JE> Please also check these same devices without the patch BEFORE you let me
    JE> know of any failures so that we can tell if they are truely caused by
    JE> the patch..

    Well, my main headache (SONY Clie SJ20) is now in a bit different state; before
    (at 4.9p1) it failed to attach with

    ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
    ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
    ucom0: init failed, STALLED
    device_probe_and_attach: ucom0 attach returned 6
    ugen0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2

    now it is correctly identified (after HotSync activation) as

    ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
    ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2

    Controller /dev/usb0:
    addr 1: low speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
     port 1 powered
     port 2 addr 2: low speed, self powered, config 1, Palm Handheld(0x0066), Palm, Inc.(0x054c), rev 1.00

    However, I still can't figure out how to sync, as dlpsh can't attach to
    /dev/ucom before activatyng Sync, and never goes to the shell prompt when
    statring in the middle of sync process. Googling does not help much,
    unfortunately.

    Two other USB devices I have are USB Generic storage (CF reader and MP3
    player), and they seem to keep work smoothly.

    I had I/O errors and hangups with cheap MemoryStick reader before,
    but do not have it by hand to quick check. Hope to check tomorrow.

    Thanks for your work!

    Sincerely,
    D.Marck [DM5020, MCK-RIPE, DM3-RIPN]
    ------------------------------------------------------------------------
    *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru ***
    ------------------------------------------------------------------------
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Mark Knight: "Re: umount induced panic"

    Relevant Pages

    • Re: HEADSUP.. USB MFC coming..
      ... ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 ... However, I still can't figure out how to sync, as dlpsh can't attach to ...
      (freebsd-hackers)
    • Re: how to sync palm under FreeBSD?
      ... ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 ... Try plugging it to different port. ...
      (freebsd-questions)
    • USB Palm/Weird messages on hotsync....
      ... 1.10/1.00, addr 2 ... Jul 16 13:08:15 lerlaptop-red kernel: ucom0: Palm, Inc. Palm Handheld, rev ... Jul 16 13:08:20 lerlaptop-red kernel: ucom0: init failed, ...
      (freebsd-current)
    • Problem with USB Still...
      ... I figured out that my pi-detach script wasn't working correctly so I ... ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 ...
      (freebsd-questions)
    • Re: Freebsd 6.1 and Palm Tungsten C
      ... device "Palm Handheld" ... vendor 0x0830 ... When i press sync button on palm, ... Ok, i saw in one message, that now ttyU0 should be used instead of ucom0, but when i'm trying: ...
      (freebsd-stable)