Re: USB2 device
From: Julian Elischer (julian_at_elischer.org)
Date: 03/28/04
- Previous message: Michael E. Mercer: "Re: USB2 device"
- In reply to: Michael E. Mercer: "Re: USB2 device"
- Next in thread: Michael E. Mercer: "Re: USB2 device"
- Reply: Michael E. Mercer: "Re: USB2 device"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 27 Mar 2004 16:07:55 -0800 To: freebsd-stable@freebsd.org
Michael E. Mercer wrote:
> Julian,
>
> I am running 4.9-Stable. I do not see EHCI in the LINT file and config
> on a kernel config file says unknown ehci device.
what tag are you checking your code out on?
>
> Any ideas?
>
> Thanks
> Michael E Mercer
>
>
> On Sat, 2004-03-27 at 18:53, Julian Elischer wrote:
>
>>Julian Elischer wrote:
>>
>>> I have the same Lexar Jumpdrive and it seems to work for me on an Asus
>>>P4PE
>>>with intel EHCI driver, as long as I plug it in AFTER booting.
>>>
>>>however:
>>>It hangs if I have the drive in during boot.
>>>It doesn't seem to give me the speed I get on another system
>>>
>>>BTW the speeds are:
>>>
>>>low speed (1.5Mb/Sec)
>>>
>>>full speed (12Mb/sec)
>>>
>>>high speed (480Mb/sec)
>>>
>>>
>>>I'm working on the USB code at the moment so I'm hoping to gete it fixed.
>>
>>I forgot to say that you need to configure the EHCI driver into our kernel
>>or you can not get USB2.
>>I notice it is not in your kernel dmesg..
>>
>>
>>>-- original message:
>>>
>>>Hello,
>>>
>>>
>>>>I have an ASUS P4C-800-E Deluxe Motherboard, P4 3.0GHz processor with
>>>>builtin
>>>>USB 2.0 controllers.
>>>>
>>>>I am having a problem with the Lexar Media JumpDrive 2.0 Pro 256M
>>>>memory keystick.
>>>>
>>>>usbd nevers sees it. I finally went into BIOS and set the Speed for
>>>>the USB
>>>>2.0 Controller to FullSpeed (maybe HighSpeed, in whatever case its
>>>>12MBps as
>>>>opposed to 240MBps). When setting it to 12MBps, usbd sees the drive and
>>>>attaches it. Setting the speed to higher, usbd does NOT attach it.
>>>>
>>>
>>>I don't know how the Bios is connecte with this...
>>>
>>>
>>>>Also NOTE: I have a SIIG SlimHub 2.0 4 ports, that I can not attach my
>>>>JumpDrive too. I must set the speed to 12MBps and attach it directly to a
>>>>port on my PC to get it to see it.
>>>>
>>>>Any help in this would be appreciated.
>>>>
>>>>Thanks! Michael E. Mercer
>>>>
>>>>My system is the latest 4.9-Stable build as of yesterday.
>>>
>>>
>>>I committed some relevant stuff yesterday. make sure you have that..
>>>
>>
>
>
--
+------------------------------------+ ______ _ __
| __--_|\ Julian Elischer | \ U \/ / hard at work in
| / \ julian@elischer.org +------>x USA \ a very strange
| ( OZ ) \___ ___ | country !
+- X_.---._/ presently in San Francisco \_/ \\
v
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
- Previous message: Michael E. Mercer: "Re: USB2 device"
- In reply to: Michael E. Mercer: "Re: USB2 device"
- Next in thread: Michael E. Mercer: "Re: USB2 device"
- Reply: Michael E. Mercer: "Re: USB2 device"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
