Re: Dell PowerEdge 1600SC Server
From: Scott E. Campbell (scampbel_at_gvpl.ca)
Date: 05/28/04
- Previous message: Doug White: "Re: 4.10-RELEASE install badness"
- In reply to: Ing. Gerardo Rodriguez Gutierrez: "Dell PowerEdge 1600SC Server"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: freebsd-stable@freebsd.org Date: Fri, 28 May 2004 11:56:18 -0700
On May 28, 2004 10:50 am, Ing. Gerardo Rodriguez Gutierrez wrote:
> Hello FreeBSD Community
>
>
>
> I am planning to buy a Dell PowerEdge 1600SC server
>
>
>
> Does anyone has proven FreeBSD on this type of server?
>
I'm running a couple of them with FreeBSD 5.2.1 and they work great. (Both
the single and dual processors models). I currently don't have one with the
PERC controller but am ordering one within a couple weeks (Dell 1600SC with
PERC). I was also going to order a DLT drive but was just given one
yesterday from another company's salvage pile.
>
>
> FreeBSD works well on this platform?
>
Yes.
>
>
> thanks
>
>
>
> FEATURES DESCRIPTION
>
> Processors Dual IntelR XeonT at up to 3.2GHz
>
> Cache from 512KB L2 up to 2MB L3 cache
>
> Chipset ServerWorksR GC-SL chipset
>
> Front side bus 533MHz
>
> I/O channels Six total: 2 x PCI-X slots (2 x 64-bit/100MHz);
>
> 4 x PCI slots (2 x 64-bit/66MHz; 2 x 32-bit/33MHz)
>
> Network interface card 10/100/1000 embedded NIC
>
> Availability Hot-plug, redundant power (optional); hot-plug hard drives
> (optional);
>
> ECC memory; easy-access chassis
>
> Maximum memory 4GB ECC DDR-266 SDRAM
>
> Internal storage scalability Up to six hot-plug (or four non hot-plug) SCSI
> drives, or up to four IDE drives.
>
> Up to 876GB SCSI internal storage
>
> Internal storage performance 10,000 and 15,000 rpm U320 SCSI drives or
> 7,200 rpm IDE drives
>
> Hard Drive Controller Embedded single channel (U320) SCSI, Embedded dual
> channel ATA100, up to
>
> six (U320) SCSI hard drives plus 2 optical devices, optional PERC 3/SC,
>
> PERC 4/SC, or optional 39160 Ultra3
>
> RAID support PERC 4/SC single channel U320 or PERC3/SC single channel U160
> RAID
>
> controller (SCSI drives)
>
> CERC quad-channel ATA RAID (IDE drives)
>
> Tape support Internal: PowerVault 100T TR40, PowerVault 100T DDS4,
> PowerVault 110T
>
> DLT VS80
>
> Video Embedded ATI Rage XL (8MB)
>
> USB performance 1.1
>
> Networking Embedded Intel Gigabit NIC
>
> Optional add-in: Intel PRO/100 S NIC, Intel PRO/1000 XT NIC,
>
> BroadcomR 5703 (10/100/1000) NIC, Broadcom ModemXtreme 56KB V.92
>
> PCI modem
>
> High availability clustering Not supported
>
> Chassis Easy-access tower (not rackable)
>
> Power supply 1 x 450W or optional 2 x 450W hot-plug redundant
>
> Systems management Integrated server monitoring (ADM1026); OpenManageT
> support
>
> Remote management Optional Dell Remote Assistant Card (DRACIII/XT)
>
> Dimensions (H xW x D) 17.61" x 8.57" x 22.53" (44.73cm x 21.77cm x 57.23cm)
>
> Weight 73 lbs., maximum configuration
>
> Rack support None
>
>
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
-- Scott E. Campbell Systems Administrator Greater Victoria Public Library Victoria, BC _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
- Previous message: Doug White: "Re: 4.10-RELEASE install badness"
- In reply to: Ing. Gerardo Rodriguez Gutierrez: "Dell PowerEdge 1600SC Server"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
