4.10 kernel panic

From: necro user (necro_at_siudong.ath.cx)
Date: 06/02/04

  • Next message: Kris Kennaway: "Re: mtree?" 
    Date: Tue, 1 Jun 2004 22:12:52 -0400
To: freebsd-stable@freebsd.org

    uhci_abort_xfer: not in process context
    The error message went thru fast and I could only catch something about miibus but I'm not sure. The only usb device is aue0.
    If i boot kernel without usb aue0, it boots fine. If i boot with it plugin, it kernel panic. If I plugin aue0 after boot up, it crashes right away.

    Following is my kernel conference.

    machine i386
    cpu I686_CPU
    ident mykernel
    maxusers 0

    #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols

    options MATH_EMULATE #Support for x87 emulation
    options INET #InterNETworking
    options INET6 #IPv6 communications protocols
    options FFS #Berkeley Fast Filesystem
    options FFS_ROOT #FFS usable as root device [keep this!]
    options SOFTUPDATES #Enable FFS soft updates support
    options UFS_DIRHASH #Improve performance on big directories
    options MFS #Memory Filesystem
    options MD_ROOT #MD is a potential root device
    options NFS #Network Filesystem
    options NFS_ROOT #NFS usable as root device, NFS required
    options MSDOSFS #MSDOS Filesystem
    options CD9660 #ISO 9660 Filesystem
    options CD9660_ROOT #CD-ROM usable as root, CD9660 required
    options PROCFS #Process filesystem
    options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
    options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
    options UCONSOLE #Allow users to grab the console
    options USERCONFIG #boot -c editor
    options VISUAL_USERCONFIG #visual boot -c editor
    options KTRACE #ktrace(1) support
    options SYSVSHM #SYSV-style shared memory
    options SYSVMSG #SYSV-style message queues
    options SYSVSEM #SYSV-style semaphores
    options P1003_1B #Posix P1003_1B real-time extensions
    options _KPOSIX_PRIORITY_SCHEDULING
    options ICMP_BANDLIM #Rate limit bad replies
    options KBD_INSTALL_CDEV # install a CDEV entry in /dev
    options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
                                            # output. Adds ~128k to driver.
    options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
                                            # output. Adds ~215k to driver.

    # To make an SMP kernel, the next two are needed
    #options SMP # Symmetric MultiProcessor Kernel
    #options APIC_IO # Symmetric (APIC) I/O

    # To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
    #options HTT # HyperThreading Technology

    device isa
    device pci

    # Floppy drives
    device fdc0 at isa? port IO_FD1 irq 6 drq 2
    device fd0 at fdc0 drive 0
    #
    # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
    # don't use the above line for fdc0 but the following one:
    #device fdc0

    # ATA and ATAPI devices
    device ata0 at isa? port IO_WD1 irq 14
    device ata1 at isa? port IO_WD2 irq 15
    device ata
    device atadisk # ATA disk drives
    device atapicd # ATAPI CDROM drives
    device atapifd # ATAPI floppy drives
    device atapist # ATAPI tape drives
    options ATA_STATIC_ID #Static device numbering

    # SCSI Controllers

    # atkbdc0 controls both the keyboard and the PS/2 mouse
    device atkbdc0 at isa? port IO_KBD
    device atkbd0 at atkbdc? irq 1 flags 0x1
    device psm0 at atkbdc? irq 12

    device vga0 at isa?

    # splash screen/screen saver
    pseudo-device splash

    # syscons is the default console driver, resembling an SCO console
    device sc0 at isa? flags 0x100

    # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
    #device vt0 at isa?
    #options XSERVER # support for X server on a vt console
    #options FAT_CURSOR # start with block cursor
    # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
    #options PCVT_SCANSET=2 # IBM keyboards are non-std

    device agp # support several AGP chipsets

    # Floating point support - do not disable.
    device npx0 at nexus? port IO_NPX irq 13

    # Power management support (see LINT for more options)
    device apm0 at nexus? disable flags 0x20 # Advanced Power Management
    device apm
    # PCCARD (PCMCIA) support
    device card
    device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
    device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

    # Serial (COM) ports
    device sio0 at isa? port IO_COM1 flags 0x10 irq 4
    device sio1 at isa? port IO_COM2 irq 3
    device sio2 at isa? disable port IO_COM3 irq 5
    device sio3 at isa? disable port IO_COM4 irq 9

    # Parallel port
    device ppc0 at isa? irq 7
    device ppbus # Parallel port bus (required)
    device lpt # Printer
    device plip # TCP/IP over parallel
    device ppi # Parallel port interface device
    #device vpo # Requires scbus and da

    # PCI Ethernet NICs that use the common MII bus controller code.
    # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
    device miibus # MII bus support
    # PRISM I IEEE 802.11b wireless NIC.
    #device awi
    # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
    # exists only as a PCMCIA device, so there is no ISA attachment needed
    # and resources will always be dynamically assigned by the pccard code.
    #device wi
    # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
    # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
    # mode (the factory default). If you set the switches on your ISA
    # card for a manually chosen I/O address and IRQ, you must specify
    # those parameters here.

    # Pseudo devices - the number indicates how many units to allocate.
    pseudo-device loop # Network loopback
    pseudo-device ether # Ethernet support
    pseudo-device sl 1 # Kernel SLIP
    pseudo-device ppp 1 # Kernel PPP
    pseudo-device tun # Packet tunnel.
    pseudo-device pty # Pseudo-ttys (telnet etc)
    pseudo-device md # Memory "disks"
    pseudo-device gif # IPv6 and IPv4 tunneling
    pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)

    # The `bpf' pseudo-device enables the Berkeley Packet Filter.
    # Be aware of the administrative consequences of enabling this!
    pseudo-device bpf #Berkeley packet filter

    # USB support
    device uhci # UHCI PCI->USB interface
    device ohci # OHCI PCI->USB interface
    device usb # USB Bus (required)
    device ugen # Generic
    device uhid # "Human Interface Devices"
    device ukbd # Keyboard
    device ulpt # Printer
    #device umass # Disks/Mass storage - Requires scbus and da
    device ums # Mouse
    device uscanner # Scanners
    device urio # Diamond Rio MP3 Player
    # USB Ethernet, requires mii
    device aue # ADMtek USB ethernet

    device pcm
    option USER_LDT
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Kris Kennaway: "Re: mtree?"

    Relevant Pages