Re: How can I mount 2nd Hard disk (IDE)

From: Doug White (dwhite_at_gumbysoft.com)
Date: 09/25/04

  • Next message: Eirik Øverby: "Re: Obscure errors in dmsg, system instability" 
    Date: Sat, 25 Sep 2004 13:31:22 -0700 (PDT)
To: Kenwey <yeskw@ms15.hinet.net>

    On Thu, 23 Sep 2004, Kenwey wrote:

    > I get a warning message when I boot my FreeBSD 5.1, it shows as follows:
    >
    > Detecting Primary Master ...WDC WD400JB-00ETA0 (40GB, running FreeBSD 5.1)
    > Detecting Primary Slave ... None
    > Detecting Secondary Master .WDC WD400BB-32CXA0 (40GB, /lib can't work well)
    > Detecting Secondary Slave ASUS CD-S520/A
    > SMART Failure Predicted on Primary Master: WDC WD400JB-00ETA0
    > WARNING: Immediately backup your data and replace your hard disk drive
    > A failure may be imminent.
    > Press F1 to conitnue, DEL to enter SETUP
    > 02/16/2000-VT694X-P4V4X-00

    This is from your BIOS. I believe the 'smartmon' port may be able to give
    you some additional information.

    > I turn off the machine, and pull it (WDC WD400JB-00ETA0) from
    > master and connect it to slave, then I do the following to backup :
    >
    > # mount -r /dev/ad2s1a /mnt
    >
    > it shows: incorrect super block

    I don't understand what you've done here. Please post 'dmesg | grep ad' in
    the new situation. 

    -- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite@gumbysoft.com          |  www.FreeBSD.org
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
  • Next message: Eirik Øverby: "Re: Obscure errors in dmsg, system instability"