5.2.1 - Dolphin 4036 4 port serial? (port 3/4 not recogniced)

From: Karl M. Joch (k.joch_at_kmjeuro.com)
Date: 10/29/04

  • Next message: cpghost_at_cordula.ws: "Re: ppp -nat broken [solved]" 
    Date: Fri, 29 Oct 2004 12:54:43 +0200
To: stable@freebsd.org

    Hello,

    I built in a card which is identified as Dolphin 4036. This card has 4
    serial ports (Sun Chip) and looking at the Dolphin Webpage there is a
    similiar product named FastPCI 4056.

    The card is recogniced and sio4 and sio5 are found and works correct.
    But there is no way to get sio6 and 7 (3rd/4th port on the card) working.

    Any hints how to add this card to pucdata would be very helpful. 

    -- 
Best regards / Mit freundlichen Gruessen,
Karl M. Joch
################
## dmesg.boot ##
FreeBSD 5.2.1-RELEASE-p6 #1: Fri Oct 29 12:19:20 CEST 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a50000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0a50244.
Preloaded splash_image_data "/boot/cts.bmp" at 0xc0a502f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2788.69-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
 
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 528482304 (504 MB)
avail memory = 503685120 (480 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f78c0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:9 INTA BIOS irq 10
pci_cfgintr: 0:11 INTA BIOS irq 11
pci_cfgintr: 0:13 INTA BIOS irq 5
pci_cfgintr: 0:15 INTA BIOS irq 5
pci_cfgintr: 0:17 INTA BIOS irq 5
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at 
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 
2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
puc0: <Dolphin Peripherals 4036> port 0xd400-0xd40f,0xd800-0xd81f irq 10 
at device 9.0 on pci0
sio4: <Dolphin Peripherals 4036> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <Dolphin Peripherals 4036> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
ahc0: <Adaptec 2940 SCSI adapter> port 0xdc00-0xdcff mem 
0xdfffb000-0xdfffbfff irq 11 at device 11.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 
0xdfffaf00-0xdfffafff irq 5 at device 13.0 on pci0
rl0: Ethernet address: 00:40:95:32:55:e7
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 
0xdfffae00-0xdfffaeff irq 5 at device 15.0 on pci0
rl1: Ethernet address: 00:40:95:30:b2:2d
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 
0xdfffad00-0xdfffadff irq 5 at device 17.0 on pci0
rl2: Ethernet address: 00:40:95:30:7e:33
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounter "TSC" frequency 2788686564 Hz quality 800
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, unlimited logging
ipfw2 initialized, divert enabled, rule-based forwarding enabled, 
default to deny, logging unlimited
IPsec: Initialized Security Association Processing.
GEOM: create disk ad0 dp=0xc4747b60
ad0: 78533MB <ExcelStor Technology J680> [159560/16/63] at ata0-master 
UDMA100
GEOM: create disk ad1 dp=0xc46f4d60
ad1: 78533MB <ExcelStor Technology J680> [159560/16/63] at ata0-slave 
UDMA100
acd0: CDROM <LTN526> at ata1-slave PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <COMPAQ SDT-10000 1.09> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/ad0s1a
module_register: module if_stf already exists!
Module if_stf failed to register: 17
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
  • Next message: cpghost_at_cordula.ws: "Re: ppp -nat broken [solved]"

    Relevant Pages