kernel crash on 5.3 current

From: Phil Oleson (oz_at_nixil.net)
Date: 12/29/04

  • Next message: Doug White: "Re: 5.3-STABLE/alpha: re(4) slowdown" 
    Date: Tue, 28 Dec 2004 23:06:19 -0700
To: freebsd-stable@freebsd.org

    This crash occurs on the 5.3 release as well as the current RELENG_5 branch.
    System has a BT-958 host controller (Bios v 4.96I/ Host adapter firmware
    v5.07B)
    Disk that causes system to bail is a Seagate ST118202LW firmware v06.
    If I take the disk out of the loop, the system boots up fine. When it's
    initialized
    the system takes a dive.

        Phil.

    -----------------------------------------------------------------------------------
    Connected to Comport 1
    KDB: debugger backends: ddb
    KDB: current backend: ddb
    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD 5.3-STABLE #0: Tue Dec 28 20:38:42 MST 2004
    root@demigorgon:/usr/src/sys/i386/compile/demigorgon
    MPTable: <DELL Opti GX270 >
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.19-MHz 686-class CPU)
    Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
    Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
    MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
    Hyperthreading: 2 logical CPUs
    real memory = 527892480 (503 MB)
    avail memory = 507027456 (483 MB)
    ioapic0: Changing APIC ID to 2
    ioapic0: Assuming intbase of 0
    ioapic0 <Version 2.0> irqs 0-23 on motherboard
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
    pci0: <PCI bus> on pcib0
    agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xed98-0xed9f mem
    0xfeb800
    00-0xfebfffff,0xe8000000-0xefffffff irq 16 at device 2.0 on pci0
    agp0: detected 8060k stolen memory
    agp0: aperture size is 128M
    uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f
    irq 16 at
    device 29.0 on pci0
    uhci0: [GIANT-LOCKED]
    usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f
    irq 19 at
    device 29.1 on pci0
    uhci1: [GIANT-LOCKED]
    usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f
    irq 18 at
    device 29.2 on pci0
    uhci2: [GIANT-LOCKED]
    usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
    usb2: USB revision 1.0
    uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub2: 2 ports with 2 removable, self powered
    uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f
    irq 16 at
    device 29.3 on pci0
    uhci3: [GIANT-LOCKED]
    usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
    usb3: USB revision 1.0
    uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub3: 2 ports with 2 removable, self powered
    pci0: <serial bus, USB> at device 29.7 (no driver attached)
    pcib1: <MPTable PCI-PCI bridge> at device 30.0 on pci0
    pci1: <PCI bus> on pcib1
    bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0xdf3c-0xdf3f mem
    0xfe9df000
    -0xfe9dffff irq 16 at device 7.0 on pci1
    bt0: BT-958 FW Rev. 5.07B Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs
    bt0: [GIANT-LOCKED]
    em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
    0xdf40-0xdf7f
    mem 0xfe9e0000-0xfe9fffff irq 18 at device 12.0 on pci1
    em0: Ethernet address: 00:0d:56:95:40:72
    em0: Speed:N/A Duplex:N/A
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ICH5 UDMA100 controller> port
    0xffa0-0xffaf,0x376,0x170-0x177,0x
    3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
    ata0: channel #0 on atapci0
    ata1: channel #1 on atapci0
    atapci1: <Intel ICH5 SATA150 controller> port
    0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20
    -0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
    ata2: channel #0 on atapci1
    ata3: channel #1 on atapci1
    pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
    pcm0: <Intel ICH5 (82801EB)> port 0xedc0-0xedff,0xee00-0xeeff mem
    0xfeb7f900-0xf
    eb7f9ff,0xfeb7fa00-0xfeb7fbff irq 17 at device 31.5 on pci0
    pcm0: [GIANT-LOCKED]
    pcm0: <Analog Devices AD1981B AC97 Codec>
    cpu0 on motherboard
    orm0: <ISA Option ROMs> at iomem
    0xd6800-0xd7fff,0xd5000-0xd67ff,0xce800-0xd4fff
    ,0xca800-0xce7ff,0xc0000-0xca7ff on isa0
    pmtimer0 on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: [GIANT-LOCKED]
    psm0: model IntelliMouse, device ID 3
    fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
    fdc0: [FAST]
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/8 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A, console
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0401> can't assign resources (port)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <PNP0f13> can't assign resources (irq)
    unknown: <PNP0303> can't assign resources (port)
    Timecounter "TSC" frequency 2793190664 Hz quality 800
    Timecounters tick every 10.000 msec
    ad0: 76293MB <WDC WD800BB-75FRA0/77.07W77> [155009/16/63] at ata0-master
    UDMA100
    acd0: CDROM <Lite-On LTN486S 48x Max/YDS6> at ata1-master UDMA33
    Waiting 15 seconds for SCSI devices to settle
    da0 at bt0 bus 0 target 0 lun 0
    da0: <SEAGATE ST118202LW 0006> Fixed Direct Access SCSI-2 device
    Fatal trap 18: integer divide fault while in kernel mode
    instruction pointer = 0x8:0xc043c40b
    stack pointer = 0x10:0xd4f9881c
    frame pointer = 0x10:0xd4f9882c
    code segment = base 0x0, limit 0xfffff, type 0x1b
                           = DPL 0, pres 1, def32 1, gran 1
    processor eflags = interrupt enabled, resume, IOPL = 0
    current process = 41 (swi3: cambio)
    [thread 100042]
    Stopped at scsi_calc_syncsrate+0x53: divl %ecx,%eax
    db> trace
    scsi_calc_syncsrate(0,0,a,0,a) at scsi_calc_syncsrate+0x53
    xpt_announce_periph(c1b75400,d4f98c74,3d672000,4,200) at
    xpt_announce_periph+0xe
    0
    dadone(c1b75400,c1b95c00) at dadone+0x618
    camisr(c072b320) at camisr+0x1f1
    ithread_loop(c193c900,d4f98d48) at ithread_loop+0x151
    fork_exit(c0513690,c193c900,d4f98d48) at fork_exit+0x74
    fork_trampoline() at fork_trampoline+0x8
    --- trap 0x1, eip = 0, esp = 0xd4f98d7c, ebp = 0 ---
    db>
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Doug White: "Re: 5.3-STABLE/alpha: re(4) slowdown"

    Relevant Pages