Re: acpi_bus_number: can't get _ADR issue on Intel D923XCV Motherboard.

From: John Baldwin (jhb_at_FreeBSD.org)
Date: 02/24/05

  • Next message: Dustin Wilhoit: "Re: SATA RAID Support" 
    To: freebsd-acpi@FreeBSD.org
Date: Thu, 24 Feb 2005 12:30:35 -0500

    On Thursday 24 February 2005 05:30 am, Mateusz Jędrasik wrote:
    > Hi,
    >
    > I have a D925XCV Intel motherboard, with if_sk on it as a builtin
    > ethernet adapter. on bootup of 5.3-RELEASE i recieve some
    > acpi_bus_number: can't get _ADR issues and errors /dmesg follows/.
    >
    > I tried changing pnp os on/off, updated my bios to the most recent
    > release, disabled all integrated devices but the ethernet, im pretty
    > much out of ideas now.
    >
    > If there is any suggestion on what i could perhaphs do, it would be more
    > than welcome, and I gladly would supply any debug information required
    > in the process of the eventual tracking down of the error.
    >
    > I will plug a pci card in there for now, but this is not quite the
    > solution i would be looking for. Also, I presume the audio card is not
    > supported yet? It's to be some realtek chipset, also integrated, afaik.

    Your network device just isn't supported yet:

    pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
    pci4: <ACPI PCI bus> on pcib3
    pci4: <network, ethernet> at device 0.0 (no driver attached)

    It may be very trivial to add support for it. Can you get the output of
    'pciconf -lv' for the pci4:0:0 device? Also, do you know if this network
    adapter is supposed to be a 10/100 adapter or a 10/100/1000 (Gigabit)? 

    -- 
John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
  • Next message: Dustin Wilhoit: "Re: SATA RAID Support"

    Relevant Pages

    • Re: ANN: Sequel 0.4.1 Released
      ... error-handling in worker threads, support for DISTINCT ON clauses, ... better support for database access using DBI and automatic adapter ... Sequel is a lightweight ORM library for Ruby. ... Improved error-handling for worker threads. ...
      (comp.lang.ruby)
    • Re: nfe(4) not working on asus m2n32sli-deluxe
      ... on board wlan adapter RTL8187_Wireless not supported ... on board lan adapter NForce 590 SLI MCP does not work ... The lack of support for RTL8187_Wireless is not a problem for now. ... detects the media settings. ...
      (freebsd-current)
    • Re: Attempt to upgrade Pavillion a1250n OS to XP Pro
      ... HP has somewhat consistently followed a policy of providing support for exactly ... >> in my XP Pro install media and began the process. ... >> video drivers or something weird there. ... If the PCI card has the smarts, ...
      (comp.sys.hp.hardware)
    • Re: nfe(4) not working on asus m2n32sli-deluxe
      ... on board lan adapter NForce 590 SLI MCP does not work ... The lack of support for RTL8187_Wireless is not a problem for now. ... nfe0: ... nfe1: ...
      (freebsd-current)
    • Re: Any leaks on the Pentax K1D yet?
      ... GPS support ... ionic field dust repulsion on low pass filter ... K, KA,KA/P,KA/F and M42 with adapter ... I like the "Still picture mode" at the end like it was an after thought;) ...
      (rec.photo.digital.slr-systems)