Re: ATA regression with 5.4-PRERELEASE

From: Mars Trading (marstrade_at_gmail.com)
Date: 03/14/05

  • Next message: Doug Lee: "Gmake won't make without itself" 
    To: stable@freebsd.org
Date: Mon, 14 Mar 2005 15:40:14 +0800

    I guess this is related to the ATA - HDD matching problem some users
    have been experiencing since 5.3-RELEASE - Errors look similar.

    Briefly:
    System unstable when ATA controller - HDD UDMA mismatched.
    e.g.: UDMA 66 controller & UDMA 100 HDDrive.

    Late model Seagate drives can be configured to use lower UDMA access
    using their uata100d.exe utility (used it, myself). Don't know if
    other brands have a similar utility though.

    Hope this gets fixed before 5.4-RELEASE.

    Dennis

    On Monday 14 March 2005 04:07, Oleg V. Nauman wrote:
    > I have some regression (or anti-regression?) with ATA on my
    > home system (RELENG_5 from last Friday)
    > I have had bad IDE 80-conductor cable, so I temporary switched
    > two my ATA devices with old 40-conductor cable on the secondary
    > IDE channel.
    > Now I have something strange: my SAMSUNG SP0411N HDD on the
    > secondary IDE channel detected again as UDMA100 device, but works
    > with errors (as expected anyway in this situation).
    > ATA controller on my system (from dmesg output):
    > atapci0: <VIA 82C686B UDMA100 controller> port
    > 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1
    > on pci0 and my devices:
    > ad0: 19130MB <SAMSUNG SV2001H/QN200-05> [38869/16/63] at
    > ata0-master UDMA100 ad1: 38166MB <ST340016A/7.18> [77545/16/63]
    > at ata0-slave UDMA100 acd0: CDROM <SAMSUNG CD-ROM SC-152L/C100>
    > at ata1-master PIO4 ad3: 38204MB <SAMSUNG SP0411N/TW100-11>
    > [77622/16/63] at ata1-slave UDMA100 ad3: WARNING - READ_DMA UDMA
    > ICRC error (retrying request) LBA=63 ad3: WARNING - READ_DMA UDMA
    > ICRC error (retrying request) LBA=63 ad3: FAILURE - READ_DMA
    > status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=63
    >
    > So: where is my UDMA33 or PIO4? :) 

    -- 
Mars Trading
9620 Kamagong St., Makati,
Manila, Philippines
Phone: (632) 8952241
FAX: (632) 8996124
email: marstrade@gmail.com
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
  • Next message: Doug Lee: "Gmake won't make without itself"

    Relevant Pages

    • Re: Help, HDD is working only on Ultra DMA mode 4
      ... HDD is working only on Ultra DMA mode 4 with default ... When I installed Intel Application Accelerator, ... everything was fine, HDD was working very fast on ATA 100, but this Intel ...
      (microsoft.public.windowsxp.hardware)
    • error 4 lba 0
      ... HDD: Samsung 80Gb ATA ... tryed also clear a mbr records ... fdisk /mbr ... Other OS, like Debian, Windows, Mandrake installed well on this HDD. ...
      (freebsd-questions)
    • Re: Very Slow Install of XP Pro
      ... Are you using ATA or SATA? ... Are you attemping to run your cd/dvd drive on the same IDE channel? ...
      (microsoft.public.windowsxp.help_and_support)
    • Quantcast