Re: SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze

From: Sven Willenberger (sven_at_dmv.com)
Date: 04/12/05

  • Next message: Mike Tancsa: "Re: Intel 6300ESB (ICH) SMBus controller not working"
    Date: Mon, 11 Apr 2005 22:37:42 -0400
    To: Aaron Summers <aaronsummers@gmail.com>
    
    

    Aaron Summers presumably uttered the following on 04/11/05 22:12:
    > Greetings,
    >
    > We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB RAM server
    > running 5.4-STABLE that keeps freezing up. We have replaced RAM, HD,
    > SCSI controller, etc. To no avail. We are running SMP GENERIC
    > Kernel. I cannot get the system to panic, leave a core dump, etc. It
    > just always freezes. The server functions as a web server in a
    > HSphere Cluster. I am about out of options besides loading 4.11
    > (since our 4 series servers never die). Any help, feedback, clues,
    > similar experiences, etc would be greatly appreciated.
    >
    > On SCSI: The onboard Adaptec 7902 gives a dump on bootup but appears
    > to work. I read the archived post about this issue. The system still
    > locked up with an Adaptec 7982B that did not give this message.
    >
    > DMESG:
    >

    <snip>

    > da2 at ahd0 bus 0 target 4 lun 0
    > da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
    > da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
    > Queueing Enabled
    > da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
    > da0 at ahd0 bus 0 target 0 lun 0
    > da0: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device
    > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
    > Queueing Enabled
    > da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
    > da1 at ahd0 bus 0 target 2 lun 0
    > da1: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device
    > da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
    > Queueing Enabled
    > da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
    > Mounting root from ufs:/dev/da0s1a
    >

    We had many issues with Seagate drives and and S/M boards with the
    onboard Adaptec scsi controllers. Seagate offered no help other than to
    suggest putting in a network card (in lieu of the onboard) and/or
    disabling SMP; neither solution was acceptable so we switched to
    IBM/Hitachi drives and the problems disappeared. By the way, the
    problems manifested themselves in those servers where we had more than
    just one hard drive installed. This was even after updating to the
    latest firmware etc; Seagate insists no problem with their drives
    although other drives work perfectly well. YMMV

    I do see you say you tried other harddrives .. which ones did you use?

    Sven
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"


  • Next message: Mike Tancsa: "Re: Intel 6300ESB (ICH) SMBus controller not working"

    Relevant Pages

    • Re: read errors
      ... sectors and 667 sectors the dive cannot read that will likely ... That's normal even for a new Seagate drive. ... Modern drives do not have soft/bad spots anymore. ... Dont take any stock in the thresholds. ...
      (comp.sys.ibm.pc.hardware.storage)
    • Re: Cloned my HD successfully but the 2nd. attempt was a failure
      ... Back in Dec. 05 I cloned my original Samsung HD to a brand new and unused ... Seagate drive. ... I should now clone my Seagate to my old Samsung as I ... involves the XP OS) contain no system files corruption, and both drives are ...
      (microsoft.public.windowsxp.general)
    • Re: Formating and reinstalling WinXP Pro on a Inspiron 530
      ... Were those OEM Seagates with very limited warrantee? ... manufactured drives to the OEM market. ... I bought OEM Seagates with not-at-all limited warranty. ... Shook my faith in Seagate though. ...
      (alt.sys.pc-clone.dell)
    • Re: Cloned my HD successfully but the 2nd. attempt was a failure
      ... Back in Dec. 05 I cloned my original Samsung HD to a brand new and unused ... Seagate drive. ... I should now clone my Seagate to my old Samsung as I ... involves the XP OS) contain no system files corruption, and both drives are ...
      (microsoft.public.windowsxp.general)
    • Re: External hard drive paging operation error
      ... A paging operation is defined as anytime the operating system writes or ... Seagate seems to acknowledge the issue but I don't get those errors from my ... Western Digital or Iomega drives. ... Despite the directions to ignore the error message, ...
      (microsoft.public.windowsxp.hardware)