[4.11] sysctl reports garbage

From: Marc Santhoff (M.Santhoff_at_t-online.de)
Date: 04/27/05

  • Next message: Rene Ladan: "new fxp lor" 
    To: "FreeBSD stable (Liste)" <freebsd-stable@freebsd.org>
Date: Wed, 27 Apr 2005 19:46:28 +0200

    Hi,

    I've updates my system this morning after reading about the usb mfc. The
    sources used before are dated from january. I'm not sure if this error
    was triggered by the update, but:

    Using "sysctl -a" it seems to lose track after some lines.

    <snip>
    kern.ostype: FreeBSD
    kern.osrelease: 4.11-STABLE
    kern.osrevision: 199506
    kern.version: FreeBSD 4.11-STABLE #0: Wed Apr 27 07:46:03 CEST 2005
        root@zaphod.das.netz:/usr/obj/usr/src/sys/zaphod.via600.conf

    kern.maxvnodes: 70336
    kern.maxproc: 6164
    kern.maxfiles: 12328
    ...
    kern.devstat.numdevs: 5
    kern.devstat.generation: 5
    kern.devstat.version: 4
    kern.disks: ad1 ad0 md0
    kern.log_wakeups_per_second: 5
    kern.log_console_output: 1
    kern.msgbuf: failed, STALLED
    umass0: BBB bulk-in clear stall failed, STALLED
    umass0: BBB bulk-out clear stall failed, STALLED
    umass0: BBB reset failed, STALLED
    umass0: BBB bulk-in clear stall failed, STALLED
    umass0: BBB bulk-out clear stall failed, STALLED
    umass0: BBB reset failed, STALLED
    umass0: BBB bulk-in clear stall failed, STALLED
    umass0: BBB bulk-out clear stall failed, STALLED
    umass0: BBB reset failed, STALLED
    umass0: BBB bulk-in clear stall failed, STALLED
    umass0: BBB bulk-out clear stall failed, STALLED
    umass0: at uhub0 port 2 (addr 2) disconnected
    umass0: detached
    umass0: Genesys Logic USB Storage Device, rev 1.10/1.13, addr 2
    umass0: Get Max Lun not supported (STALLED)
    da0 at umass-sim0 bus 0 target 0 lun 0
    da0: <Generic STORAGE DEVICE 0.01> Removable Direct Access SCSI-0 device
    da0: 650KB/s transfers
    da0: 0MB (1 0 byte sectors: 0H 0S/T 0C)
    ...
    4btrc: 4 ISDN trace device(s) attached
    ad0: 57220MB <IC35L060AVV207-0> [116257/16/63] at ata0-master UDMA100
    ad1: 157066MB <HDS722516VLAT80> [319120/16/63] at ata0-slave UDMA100
    acd0: DVD-ROM <AOPEN DVD1648/AAP> at ata1-master PIO4
    Waiting 15 seconds for SCSI devices to settle
    Mounting root from ufs:/dev/ad0s3a
    WARNING: / was not properly dismounted
    <118>DEPENDENCY NOTE: portmap will be enabled to support NFS
    <118>swapon: adding /dev/ad0s3b as swap device
    <118>Automatic boot in progress...
    <118>/dev/ad0s3a:
    <118>3170 files, 57784 used, 41399 free
    <118>(1783 frags, 4952 blocks, 1.8% fragmentation)
    <118>/dev/ad0s3f:
    <118>693033 files, 14063329 used, 1474471 free
    <118>(86495 frags, 173497 blocks, 0.6% fragmentation)
    <118>/dev/ad0s3e:
    <118>3561 files, 68623 used, 30560 free
    <118>(592 frags, 3746 blocks, 0.6% fragmentation)
    <118>/dev/ad0s4e:
    <118>230568 files, 1527217 used, 473348 free
    <118>(13532 frags, 57477 blocks, 0.7% fragmentation)
    <118>Doing initial network setup:
    <118> hostname
    ...
    p1003_1b.timer_max: 0
    jail.set_hostname_allowed: 1
    jail.socket_unixiproute_only: 1
    jail.sysvipc_allowed: 0
    compat.linux.osname: Linux
    compat.linux.osrelease: 2.4.2
    compat.linux.oss_version: 198144
    </snip>

    As you can see it prints the last system log from some hours before.
    Somewhere in the middle it preceeds each line with <118> and then is
    getting back to normal operation (at least it looks that way).

    World and kernel were build and installed together.

    Any hints how to correct this? Need some more diagnostic output?

    TIA,
    Marc

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Rene Ladan: "new fxp lor"

    Relevant Pages