Re: USB changes.

From: Julian Elischer (julian_at_elischer.org)
Date: 04/28/05

  • Next message: Joe Altman: "Re: USB changes." 
    Date: Thu, 28 Apr 2005 13:11:37 -0700
To: Joe Altman <fj@panix.com>

    Joe Altman wrote:

    >On Thu, Apr 28, 2005 at 11:23:14AM -0700, Julian Elischer wrote:
    >
    >
    >

    [...]

    >
    >
    >>I assume it works right if you remove the mouse before booting and reinsert
    >>it after the kernel has booted?
    >>
    >>
    >
    >Yes; once I have a console, the mouse is detected:
    >
    >ums0: Logitech USB Receiver, rev 1.10/23.02, addr 2, iclass 3/1
    >ums0: 7 buttons and Z dir.
    >
    >Then, it works in X just fine; I forgot to test it on the console.
    >
    >
    >
    seems to work for me with uhci too..
    can you see if changing the BIOS usb optiosn makes a difference?
    [...]
    uhci0: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 5 at
    device 29.0 o n pci0
    usb0: <UHCI (generic) USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 9 at
    device 29.1 o n pci0
    usb1: <UHCI (generic) USB controller> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    pci0: <unknown card> (vendor=0x8086, dev=0x25ab) at 29.4
    pci0: <unknown card> (vendor=0x8086, dev=0x25ac) at 29.5
    ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff irq
    7 at de vice 29.7 on pci0
    usb2: EHCI version 1.0
    usb2: companion controllers, 2 ports each: usb0 usb1
    usb2: <EHCI (generic) USB 2.0 controller> on ehci0
    usb2: USB revision 2.0
    uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    uhub2: single transaction translator
    uhub2: 4 ports with 4 removable, self powered
    [...]
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model IntelliMouse, device ID 3
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x100>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A, console
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    ppc0: parallel port not found.
    DUMMYNET initialized (011031)
    IP packet filtering initialized, divert enabled, rule-based forwarding
    enabled, default to accept, logging disabled
    IPsec: Initialized Security Association Processing.
    ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100
    ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
    1.10/3.00, add r 2, iclass 3/1
    ums0: 3 buttons and Z dir.
    Mounting root from ufs:/dev/ad0s1a

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Joe Altman: "Re: USB changes."
    • Quantcast