[solved] fatal trap 12 on ASRock K7Upgrade-880 board

From: Holger Kipp (hk_at_alogis.com)
Date: 05/08/05

  • Next message: Doug White: "Re: loss of keyboard in single-user mode in RELENG_5" 
    Date: Sun, 8 May 2005 23:29:38 +0200
To: stable@freebsd.org

    Hi,
    usually I hate replying to myself, but
    this time it seems to be good news :-)

    The describe behaviour (see below) is
    no longer reproducable with the latest
    5.4-STABLE as of today (8.5.2005, around
    18:00 CEST).

    So thanx to whoever fixed this ;-)

    Regards,
    Holger

    On Sun, May 08, 2005 at 02:38:58PM +0200, Holger Kipp wrote:
    > I have a very interesting behaviour here. During boot, I can use
    > the keyboard (eg on the initial boot menu), but if I press a key
    > after the message
    >
    > "Starting sshd"
    >
    > was printed (and before the login prompt), I get
    >
    > -----------------------
    > Fatal trap 12: page fault while in kernel mode
    > fault virtual address = 0xae
    > fault code = supervisor read, page not present
    > instruction pointer = 0x8:0xae
    > stack pointer = 0x10:0xd41bdc94
    > frame pointer = 0x10:0xd41bdcb0
    > code segment = base 0x0, limit 0xfffff, type 0x1b
    > = DPL 0, pres 1, def32 1, gran 1
    > processor eflags = interrupt enabled, resume, IOPL = 0
    > current process = 12 (irq1: atkbd0)
    > trap number = 12
    > panic: page fault
    > Uptime: 21s
    > Cannot dump. No dump device defined.
    > Automatic reboot in 15 seconds - press a key on the console to abort
    > --> Press a key on the console to reboot,
    > --> or switch off the system now.
    > -----------------------
    >
    > Anything stupid I have missed?
    > Regards,
    > Holger Kipp
    >
    > - - - - - - - - - - - - - - - - - - - - -
    >
    > dmesg is:
    >
    > Copyright (c) 1992-2005 The FreeBSD Project.
    > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    > The Regents of the University of California. All rights reserved.
    > FreeBSD 5.4-STABLE #5: Thu May 5 21:18:07 CEST 2005
    > root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN
    > ACPI APIC Table: <A M I OEMAPIC >
    > Timecounter "i8254" frequency 1193182 Hz quality 0
    > CPU: AMD Duron(tm) (1300.06-MHz 686-class CPU)
    > Origin = "AuthenticAMD" Id = 0x671 Stepping = 1
    > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
    > AMD Features=0xc0400000<AMIE,DSP,3DNow!>
    > real memory = 536543232 (511 MB)
    > avail memory = 515383296 (491 MB)
    > ioapic0: Changing APIC ID to 1
    > MADT: Forcing active-low polarity and level trigger for SCI
    > ioapic0 <Version 0.3> irqs 0-23 on motherboard
    > npx0: <math processor> on motherboard
    > npx0: INT 16 interface
    > acpi0: <A M I OEMRSDT> on motherboard
    > acpi0: Power Button (fixed)
    > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    > cpu0: <ACPI CPU> on acpi0
    > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    > pci0: <ACPI PCI bus> on pcib0
    > agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
    > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    > pci1: <ACPI PCI bus> on pcib1
    > pci1: <display, VGA> at device 0.0 (no driver attached)
    > atapci0: <VIA 6420 SATA150 controller> port 0xd800-0xd8ff,0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 20 at device 15.0 on pci0
    > ata2: channel #0 on atapci0
    > ata3: channel #1 on atapci0
    > atapci1: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
    > ata0: channel #0 on atapci1
    > ata1: channel #1 on atapci1
    > uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.0 on pci0
    > usb0: <VIA 83C572 USB controller> on uhci0
    > usb0: USB revision 1.0
    > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub0: 2 ports with 2 removable, self powered
    > uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.1 on pci0
    > usb1: <VIA 83C572 USB controller> on uhci1
    > usb1: USB revision 1.0
    > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub1: 2 ports with 2 removable, self powered
    > uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.2 on pci0
    > usb2: <VIA 83C572 USB controller> on uhci2
    > usb2: USB revision 1.0
    > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub2: 2 ports with 2 removable, self powered
    > uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.3 on pci0
    > usb3: <VIA 83C572 USB controller> on uhci3
    > usb3: USB revision 1.0
    > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub3: 2 ports with 2 removable, self powered
    > pci0: <serial bus, USB> at device 16.4 (no driver attached)
    > isab0: <PCI-ISA bridge> at device 17.0 on pci0
    > isa0: <ISA bus> on isab0
    > pci0: <multimedia, audio> at device 17.5 (no driver attached)
    > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
    > miibus0: <MII bus> on vr0
    > ukphy0: <Generic IEEE 802.3u media interface> on miibus0
    > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    > vr0: Ethernet address: 00:0b:6a:c0:00:ce
    > acpi_button0: <Power Button> on acpi0
    > fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
    > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    > ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
    > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    > ppc0: FIFO with 16/16/9 bytes threshold
    > ppbus0: <Parallel port bus> on ppc0
    > ppbus0: IEEE1284 device found /NIBBLE/ECP
    > Probing for PnP devices on ppbus0:
    > ppbus0: <HEWLETT-PACKARD DESKJET 640C> MLC,PCL,PML
    > plip0: <PLIP network interface> on ppbus0
    > lpt0: <Printer> on ppbus0
    > lpt0: Interrupt-driven port
    > ppi0: <Parallel I/O> on ppbus0
    > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    > atkbd0: <AT Keyboard> irq 1 on atkbdc0
    > kbd0 at atkbd0
    > sio0: configured irq 4 not in bitmap of probed irqs 0
    > sio0: port may not be enabled
    > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    > sio0: type 16550A
    > pmtimer0 on isa0
    > sc0: <System console> at flags 0x100 on isa0
    > sc0: VGA <16 virtual consoles, flags=0x300>
    > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    > sio1: configured irq 3 not in bitmap of probed irqs 0
    > sio1: port may not be enabled
    > ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
    > ums0: 5 buttons and Z dir.
    > uhub4: Cypress Semiconductor Slim Hub, class 9/0, rev 2.00/0.08, addr 2
    > uhub4: 4 ports with 4 removable, self powered
    > umass0: SMSC 223 USB97C223, rev 2.00/1.95, addr 3
    > uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 4
    > Timecounter "TSC" frequency 1300055309 Hz quality 800
    > Timecounters tick every 10.000 msec
    > ad0: 152627MB <SAMSUNG SP1614N/TM100-30> [310101/16/63] at ata0-master UDMA100
    > ad1: 76351MB <SAMSUNG SP0802N/TK100-24> [155127/16/63] at ata0-slave UDMA100
    > acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33
    > acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4
    > cd0 at ata1 bus 0 target 0 lun 0
    > cd0: <HL-DT-ST DVDRAM GSA-4163B A102> Removable CD-ROM SCSI-0 device
    > cd0: 33.000MB/s transfers
    > cd0: Attempt to query device size failed: NOT READY, Medium not present
    > cd1 at ata1 bus 0 target 1 lun 0
    > cd1: <HL-DT-ST RW/DVD GCC-4120B 2.01> Removable CD-ROM SCSI-0 device
    > cd1: 16.000MB/s transfers
    > cd1: Attempt to query device size failed: NOT READY, Medium not present
    > da0 at umass-sim0 bus 0 target 0 lun 0
    > da0: <SMSC 223 U HS-CF 1.95> Removable Direct Access SCSI-0 device
    > da0: 1.000MB/s transfers
    > da0: Attempt to query device size failed: NOT READY, Medium not present
    > da1 at umass-sim0 bus 0 target 0 lun 1
    > da1: <SMSC 223 U HS-MS 1.95> Removable Direct Access SCSI-0 device
    > da1: 1.000MB/s transfers
    > da1: Attempt to query device size failed: NOT READY, Medium not present
    > da2 at umass-sim0 bus 0 target 0 lun 2
    > da2: <SMSC 223 U HS-SM 1.95> Removable Direct Access SCSI-0 device
    > da2: 1.000MB/s transfers
    > da2: Attempt to query device size failed: NOT READY, Medium not present
    > da3 at umass-sim0 bus 0 target 0 lun 3
    > da3: <SMSC 223 U HS-SD/MMC 1.95> Removable Direct Access SCSI-0 device
    > da3: 1.000MB/s transfers
    > da3: Attempt to query device size failed: NOT READY, Medium not present
    > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
    > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
    > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
    > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
    > (da0:umass-sim0:0:0:0): Medium not present
    > (da0:umass-sim0:0:0:0): Unretryable error
    > Opened disk da0 -> 6
    > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
    > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
    > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
    > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
    > (da0:umass-sim0:0:0:0): Medium not present
    > (da0:umass-sim0:0:0:0): Unretryable error
    > Opened disk da0 -> 6
    > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
    > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
    > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
    > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
    > (da0:umass-sim0:0:0:0): Medium not present
    > (da0:umass-sim0:0:0:0): Unretryable error
    > Opened disk da0 -> 6
    > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
    > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
    > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
    > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0
    > (da1:umass-sim0:0:0:1): Medium not present
    > (da1:umass-sim0:0:0:1): Unretryable error
    > Opened disk da1 -> 6
    > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
    > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
    > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
    > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0
    > (da1:umass-sim0:0:0:1): Medium not present
    > (da1:umass-sim0:0:0:1): Unretryable error
    > Opened disk da1 -> 6
    > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
    > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
    > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
    > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0
    > (da1:umass-sim0:0:0:1): Medium not present
    > (da1:umass-sim0:0:0:1): Unretryable error
    > Opened disk da1 -> 6
    > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
    > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
    > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
    > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0
    > (da2:umass-sim0:0:0:2): Medium not present
    > (da2:umass-sim0:0:0:2): Unretryable error
    > Opened disk da2 -> 6
    > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
    > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
    > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
    > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0
    > (da2:umass-sim0:0:0:2): Medium not present
    > (da2:umass-sim0:0:0:2): Unretryable error
    > Opened disk da2 -> 6
    > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
    > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
    > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
    > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0
    > (da2:umass-sim0:0:0:2): Medium not present
    > (da2:umass-sim0:0:0:2): Unretryable error
    > Opened disk da2 -> 6
    > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
    > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
    > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
    > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0
    > (da3:umass-sim0:0:0:3): Medium not present
    > (da3:umass-sim0:0:0:3): Unretryable error
    > Opened disk da3 -> 6
    > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
    > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
    > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
    > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0
    > (da3:umass-sim0:0:0:3): Medium not present
    > (da3:umass-sim0:0:0:3): Unretryable error
    > Opened disk da3 -> 6
    > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
    > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
    > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
    > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0
    > (da3:umass-sim0:0:0:3): Medium not present
    > (da3:umass-sim0:0:0:3): Unretryable error
    > Opened disk da3 -> 6
    > Mounting root from ufs:/dev/ad0s1a
    > WARNING: / was not properly dismounted
    > WARNING: /tmp was not properly dismounted
    > WARNING: /usr was not properly dismounted
    > WARNING: /var was not properly dismounted
    > WARNING: /mnt was not properly dismounted
    > WARNING: /mnt/var was not properly dismounted
    > WARNING: /mnt/tmp was not properly dismounted
    > WARNING: /mnt/usr was not properly dismounted
    > pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
    > pcm0: <Unknown AC97 Codec (id = 0x434d4983)>
    >
    > _______________________________________________
    > freebsd-stable@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Doug White: "Re: loss of keyboard in single-user mode in RELENG_5"

    Relevant Pages

    • fatal trap / spin lock - src from 7/16/04
      ... Console: serial port ... Boot FreeBSD with ACPI enabled ³ ... 0xcc000-0xcc7ff,0xc0000-0xc8fff on isa0 ... page fault while in kernel mode ...
      (freebsd-current)
    • 6.0 panics on boot
      ... panic, Fatal trap 12, page fault at the NVidea driver in the boot. ... pci0: <ACPI PCI bus> on pcib0 ... fdc0: port ...
      (freebsd-questions)
    • RE: Problem with foppy drive
      ... I think I see your problem in the boot log. ... <ACPI PCI bus> on pcib0 ... <Parallel port bus> on ppc0 ... on ppbus0 ...
      (freebsd-questions)
    • Re: Linux 2.6.29-rc1 MAJOR advisory
      ... boot the 2.6.29-rc1 I had built destroyed the MCP55 eth0 port, ... now enabled in the bios and am using the 2nd & last eth1 port on this ... had to boot the patch -rc1 a second time. ... Hence the 2nd reboot. ...
      (Linux-Kernel)
    • nforce2 usb is broken on -stable
      ... the 2.0 boards lock up on boot during the uhub0 bus ... While I can boot without the devices and attach them later, ... cause the box to reset. ... ohci_root_ctrl_transfer: writing reset to port ...
      (freebsd-stable)