RE: RE: Re: Supermicro superserver 5013S-i

From: Balgansuren.B (balgaa_at_micom.mn)
Date: 05/19/05

  • Next message: Rob: "Re: SATA378 / SATA150 RAID controller supported by 5.4?"
    To: freebsd-stable@freebsd.org
    Date: Thu, 19 May 2005 01:15:43 +0000 (GMT)
    
    

    Hi,

    I sent following but no answer yet
    ========================
    Hi,

    Existing BIOS version is 1.3a, which is same on web.

    Balgaa

    --- Support <support@supermicro.com> wrote:
    > Hi,
    >
    > did you have the latest bios for the board?
    > http://www.supermicro.com/support/bios/
    >
    > thanks,
    >
    > john
    ==============================

    Balgaa

    > On Sun, 15 May 2005, Balgansuren.B wrote:
    >
    > > Doug,
    > >
    > > I checked website for BIOS files and current loaded
    > BIOS is latest
    > > version.
    > >
    > > If I to use continously ACPI aware=NO, is there any
    > problem?
    >
    > You can, but you may have reduced functionality
    > (particularly if ACPI
    > supports thermal zones).
    >
    > > Previously, on server was loaded Fedora Core 2,
    > then I removed it.
    > >
    > > BTW, when I install Fedora Core 2 and it works
    > normal.
    >
    > Fedora doesn't use ACPI by default I don't think.
    > They may also suppress
    > the messages.
    >
    > Again, the messages are largely harmless. I suspect
    > its due to using a
    > very old ACPI compiler and specification.
    >
    > >
    > > Balgaa
    > >
    > >
    > > > On Sat, 14 May 2005, Balgansuren.B wrote:
    > > >
    > > > > Yesterday (13 May, 2005), I installed FreeBSD
    > 5.4
    > > > Release on this
    > > > > server without problem. This morning (14 May,
    > 2005)
    > > > I did cvsup and now
    > > > > it is 5.4-STABLE.
    > > > >
    > > > > But I saw strange thing when I change settings
    > on
    > > > bios setup.
    > > > >
    > > >
    > > > [...]
    > > >
    > > > > May 14 10:41:41 altainet kernel: ACPI-0698: ***
    > > > Warning: Type override
    > > > > - [DEB_] had invalid type (Integer) for Scope
    > > > operator, changed to
    > > > > (Scope)
    > > >
    > > > This is a bug in the ACPI DSDT table in the BIOS.
    > If
    > > > upgrading the BIOS
    > > > causes this then contact your systems vendor and
    > > > complain since the prior
    > > > BIOS table did not have these errors. It
    > obviously
    > > > goes away when ACPI is
    > > > disabled since the table is not evaluated in that
    > > > instance.
    > > >
    > > > Its likely harmless.
    > > >
    > > > --
    > > > Doug White | FreeBSD: The
    > Power
    > > > to Serve
    > > > dwhite@gumbysoft.com | www.FreeBSD.org
    > > > _______________________________________________
    > > > freebsd-stable@freebsd.org mailing list
    > > >
    > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    >
    > > >
    > > > To unsubscribe, send any mail to
    > > > "freebsd-stable-unsubscribe@freebsd.org"
    > > >
    > > >
    > >
    > >
    > > _______________________________________________
    > > freebsd-stable@freebsd.org mailing list
    > >
    > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    >
    > > To unsubscribe, send any mail to
    > "freebsd-stable-unsubscribe@freebsd.org"
    > >
    >
    > --
    > Doug White | FreeBSD: The Power
    > to Serve
    > dwhite@gumbysoft.com | www.FreeBSD.org
    > _______________________________________________
    > freebsd-stable@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    >
    > To unsubscribe, send any mail to
    > "freebsd-stable-unsubscribe@freebsd.org"
    >
    >

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"


  • Next message: Rob: "Re: SATA378 / SATA150 RAID controller supported by 5.4?"

    Relevant Pages

    • RE: Re: Supermicro superserver 5013S-i
      ... > I checked website for BIOS files and current loaded BIOS is latest ... but you may have reduced functionality (particularly if ACPI ... the messages are largely harmless. ... To unsubscribe, ...
      (freebsd-current)
    • RE: Re: Supermicro superserver 5013S-i
      ... > I checked website for BIOS files and current loaded BIOS is latest ... but you may have reduced functionality (particularly if ACPI ... the messages are largely harmless. ... To unsubscribe, ...
      (freebsd-stable)
    • RE: RE: Re: Supermicro superserver 5013S-i
      ... Existing BIOS version is 1.3a, ... Balgaa ... > Fedora doesn't use ACPI by default I don't think. ... >> To unsubscribe, send any mail to ...
      (freebsd-current)
    • Computer wont resume from S3
      ... It looks like the problem goes away if I change the suspend type to S1 instead of S3 in the BIOS, although I thought Linux overrode the BIOS when using ACPI? ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". ...
      (Debian-User)
    • [ANNOUNCE] ACPI BIOS Guideline for Linux
      ... Linux is urgently missing and should get published. ... I mainly try to get feedback from OEMs and BIOS developers, ... ACPI BIOS checks whether Linux is running...). ...
      (Linux-Kernel)