Re: Poor network performance: a lot of timeouts

From: Pertti Kosunen (pertti.kosunen_at_pp.nic.fi)
Date: 05/30/05

  • Next message: Daniel Gerzo: "Re[2]: port-problem: apache2.0.54 mod_perl2 no Modules!!" 
    Date: Mon, 30 May 2005 19:52:13 +0300
To: Imobach ďż˝ Sosa <imobachgs@banot.net>

    Imobach González Sosa wrote:

    >Ok, I think I have it correctly with this command:
    >
    > ifconfig rl0 media 100baseTX -mediaopt full-duplex
    >
    >(rl0 or dc0, I've used two different NICs).
    >
    >Moreover, I connected my FreeBSD box to the ADSL router (directly, no
    >more machines connected) and forced the adapter to 10baseT/UTP and
    >full-duplex but it didn't work. I also tried with 100baseTX, but then
    >there was no carrier (the ADSL router is a bit old, and only support
    >10Mbps).
    >
    Both sides must have same config, autosense should work if there is no
    config possibility in other end.
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Daniel Gerzo: "Re[2]: port-problem: apache2.0.54 mod_perl2 no Modules!!"

    Relevant Pages

    • Re: IP Config with 2 NICs Wizard dont work, Static dont work!
      ... Sorry, tried to send you the config from the SBS server, but despite having ... plainly my ADSL router is 192.168.1.10 ... The wording of the original post _suggested_ both NICs are on ...
      (microsoft.public.windows.server.sbs)
    • Re: Home Network question
      ... >If I get the ADSL router, do I still need the ICS and with the same config? ... With an ADSL router, you won't need ICS. ... Now that T51 has DHCP enabled, does it have internet service? ...
      (microsoft.public.windowsxp.network_web)
    • Re: VoIP problem with RRAS on 2003 SBS server
      ... If I put SBS into 1nic config, how would that impact the use of VPN? ... I connected my laptop directly to the adsl router, ...
      (microsoft.public.windows.server.sbs)
    • Re: Waking up remotely a Linux box
      ... > The computer is connected, via Ethernet, to an ADSL router that is ... with the ADSL connection on by default. ... What such NICs are supported under Linux? ... I can configure the ADSL router at will. ...
      (comp.os.linux.hardware)
    • Re: An error occured when configuring networking settings. See your network administrator." While tr
      ... Your setup will not work if you don't assign different subnets to the LAN ... and WAN NICs on your SBS. ... ADSL Router outside: DHCP of your ISP or whatever IP they supply ...
      (microsoft.public.windows.server.sbs)