Error in kernel source, possibly GCC related

From: Owe Jørgensen (oweandre_at_stud.ntnu.no)
Date: 10/12/05

  • Next message: Kris Kennaway: "Re: Error in kernel source, possibly GCC related"
    Date: Wed, 12 Oct 2005 19:15:08 +0200
    To: freebsd-stable@freebsd.org
    
    

    I have a FreeBSD 5.3 system which I am upgrading to 5.4 STABLE.

    I am at this moment compiling the kernel, and I get this error when make
    buildkernel goes for compilation of ispfw:

    ===> ispfw
    cc -O -pipe -D_KERNEL -DKLD_MODULE -nostdinc -I- -include
    /usr/obj/usr/src/sys/RANDYMAN/opt_global.h -I. -I@ -I@/contrib/altq
    -I@/../include -finline-limit=8000 -fno-common
    -I/usr/obj/usr/src/sys/RANDYMAN -mno-align-long-strings
    -mpreferred-stack-boundary=2 -mno-mmx -mno-3dnow -mno-sse -mno-sse2
    -ffreestanding -Wall -Wredundant-decls -Wnested-externs
    -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline
    -Wcast-qual -fformat-extensions -std=c99 -c
    /usr/src/sys/modules/ispfw/../../dev/ispfw/ispfw.c
    In file included from /usr/src/sys/modules/ispfw/../../dev/ispfw/ispfw.c:40:
    @/dev/ispfw/asm_2100.h:4847: internal compiler error: in tree_low_cst,
    at tree.c:3314
    Please submit a full bug report,
    with preprocessed source if appropriate.
    See <URL:http://gcc.gnu.org/bugs.html> for instructions.
    *** Error code 1

    Stop in /usr/src/sys/modules/ispfw.
    *** Error code 1

    Stop in /usr/src/sys/modules.
    *** Error code 1

    Stop in /usr/obj/usr/src/sys/RANDYMAN.
    *** Error code 1

    Stop in /usr/src.
    *** Error code 1

    Stop in /usr/src.
    m240g#

    =============================
    Below I have included my KERNEL config:

    #
    # GENERIC -- Generic kernel configuration file for FreeBSD/i386
    #
    # For more information on this file, please read the handbook section on
    # Kernel Configuration Files:
    #
    #
    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
    #
    # The handbook is also available locally in /usr/share/doc/handbook
    # if you've installed the doc distribution, otherwise always see the
    # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
    # latest information.
    #
    # An exhaustive list of options and more detailed explanations of the
    # device lines is also present in the ../../conf/NOTES and NOTES files.
    # If you are in doubt as to the purpose or necessity of a line, check first
    # in NOTES.
    #
    # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.13 2005/04/02 16:37:58
    scottl Exp $

    machine i386
    cpu I686_CPU
    ident RANDYMAN

    # To statically compile in device wiring instead of /boot/device.hints
    #hints "GENERIC.hints" # Default places to look for devices.

    options SCHED_4BSD # 4BSD scheduler
    options INET # InterNETworking
    options INET6
    options FFS # Berkeley Fast Filesystem
    options SOFTUPDATES # Enable FFS soft updates support
    options UFS_ACL # Support for access control lists
    options UFS_DIRHASH # Improve performance on big directories
    options NFSCLIENT # Network Filesystem Client
    options MSDOSFS # MSDOS Filesystem
    options CD9660 # ISO 9660 Filesystem
    options PROCFS # Process filesystem (requires PSEUDOFS)
    options PSEUDOFS # Pseudo-filesystem framework
    options GEOM_GPT # GUID Partition Tables.
    options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
    options COMPAT_FREEBSD4 # Compatible with FreeBSD4
    options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
    options KTRACE # ktrace(1) support
    options SYSVSHM # SYSV-style shared memory
    options SYSVMSG # SYSV-style message queues
    options SYSVSEM # SYSV-style semaphores
    options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
    options KBD_INSTALL_CDEV # install a CDEV entry in /dev
    options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
                                            # output. Adds ~128k to driver.
    options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
                                            # output. Adds ~215k to driver.
    options ADAPTIVE_GIANT # Giant mutex is adaptive.

    device apic # I/O APIC

    # Bus support. Do not remove isa, even if you have no isa slots
    device isa
    device pci

    # Floppy drives
    device fdc

    # ATA and ATAPI devices
    device ata
    device atadisk # ATA disk drives
    device atapicd # ATAPI CDROM drives
    device atapifd # ATAPI floppy drives
    options ATA_STATIC_ID # Static device numbering

    # SCSI Controllers
    # SCSI peripherals
    # RAID controllers
    device scbus
    device da
    # atkbdc0 controls both the keyboard and the PS/2 mouse
    device atkbdc # AT keyboard controller
    device atkbd # AT keyboard
    device psm # PS/2 mouse

    device vga # VGA video card driver

    device splash # Splash screen and screen saver support

    # syscons is the default console driver, resembling an SCO console
    device sc

    # Enable this for the pcvt (VT220 compatible) console driver
    #device vt
    #options XSERVER # support for X server on a vt console
    #options FAT_CURSOR # start with block cursor

    device agp # support several AGP chipsets

    # Floating point support - do not disable.
    device npx

    # Power management support (see NOTES for more options)
    #device apm
    # Add suspend/resume support for the i8254.
    device pmtimer

    # PCCARD (PCMCIA) support
    # PCMCIA and cardbus bridge support

    # Serial (COM) ports

    # Parallel port
    # If you've got a "dumb" serial or parallel PCI card that is
    # supported by the puc(4) glue driver, uncomment the following
    # line to enable it (connects to the sio and/or ppc drivers):
    #device puc

    # PCI Ethernet NICs.
    # PCI Ethernet NICs that use the common MII bus controller code.
    # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
    device miibus # MII bus support
    device rl # RealTek 8129/8139
    device sis # Silicon Integrated Systems SiS 900/SiS 7016
    device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

    # ISA Ethernet NICs. pccard NICs included.

    # ISA devices that use the old ISA shims
    #device le

    # Wireless NIC cards

    # Pseudo devices.
    device loop # Network loopback
    device mem # Memory and kernel memory devices
    device io # I/O device
    device random # Entropy device
    device ether # Ethernet support
    #device sl # Kernel SLIP
    #device ppp # Kernel PPP
    device tun # Packet tunnel.
    device pty # Pseudo-ttys (telnet etc)
    device md # Memory "disks"
    device gif # IPv6 and IPv4 tunneling
    #device faith # IPv6-to-IPv4 relaying (translation)

    # The `bpf' device enables the Berkeley Packet Filter.
    # Be aware of the administrative consequences of enabling this!
    # Note that 'bpf' is required for DHCP.
    device bpf # Berkeley packet filter

    # USB support
    device uhci # UHCI PCI->USB interface
    device ohci # OHCI PCI->USB interface
    device ehci # EHCI PCI->USB interface (USB 2.0)
    device usb # USB Bus (required)
    #device udbp # USB Double Bulk Pipe devices
    device ugen # Generic
    device uhid # "Human Interface Devices"
    device umass # Disks/Mass storage - Requires scbus and da
    # USB Ethernet, requires mii

    # FireWire support
    device firewire # FireWire bus code

    device sound
    device "snd_cmi"

    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"


  • Next message: Kris Kennaway: "Re: Error in kernel source, possibly GCC related"

    Relevant Pages

    • Kernel for Dual Core
      ... I have just subscribed to this mailinglist, so I do hope you forgive me if I ask a redundant question about recompiling my Kernel; ... # Bus support. ... # PCI Ethernet NICs - common MII bus controller code. ...
      (freebsd-questions)
    • 5.2 p2 wont recognize my cdrw drive
      ... I recompiled the kernel and now the new kernel won't ... # RAID controllers interfaced to the SCSI subsystem ... # Floating point support - do not disable. ... # PCI Ethernet NICs that use the common MII bus controller code. ...
      (freebsd-current)
    • Re: No matter what I try I cant get Nvidia 3d acceleration to work. Please help!
      ... edit MYKERNEL, delete 'device agp' ... **Building a Kernel* ... # Power management support ... # PCI Ethernet NICs that use the common MII bus controller code. ...
      (freebsd-questions)
    • Re: printing boot probe messages
      ... When I made my first kernel, I had begun ... # RAID controllers interfaced to the SCSI subsystem ... # Power management support ... # PCI Ethernet NICs that use the common MII bus controller code. ...
      (freebsd-hackers)
    • FreeBSD 6.0 Release: XMMS causes kernel panic if HTT is enabled
      ... If HTT is enabled XMMS causes kernel panic after few ... # Power management support # Add suspend/resume support for the i8254. ... # PCI Ethernet NICs that use the common MII bus controller code. ... # The `bpf' device enables the Berkeley Packet Filter. ...
      (freebsd-questions)