Suitable HBA for STABLE

From: Brad Miele (bmiele_at_ipnstock.com)
Date: 11/28/05

  • Next message: Wilko Bulte: "Re: Suitable HBA for STABLE" 
    Date: Mon, 28 Nov 2005 13:29:31 -0500 (EST)
To: freebsd-stable@freebsd.org

    Hi,

    I have just been given a HP MSA1500 SAN, and the card that our IT
    department ordered is an Emulex 9802, as far as i can tell, there is no
    freebsd driver for this card, is this correct? If it is correct, what card
    is the best supported? It looks like isp supports the qlogic cards through
    2300x, but is there any one card that i should look at?

    I am currently running 5.4-stable on my boxes (HP/Compaq DL380s), but
    could move them to 6 ahead of schedule if needed.

    Thanks for any advice.

    Brad
    ------------------------------------------------------------
      Brad Miele
      IPNStock
      bmiele@ipnstock.com
    _______________________________________________
    freebsd-stable@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-stable
    To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

  • Next message: Wilko Bulte: "Re: Suitable HBA for STABLE"

    Relevant Pages

    • Solaris as FC SAN client
      ... How I get going with mounting a SAN partition using Sun Fiber card on ... but both Sun and our suppliers say this is correct. ...
      (SunManagers)
    • Re: P520
      ... channel SCSI RAID Enablement Daughter Card attached to SAN DS4700 ... connected through 4Gbps PCI Express HBA card with RDAC ...
      (RedHat)
    • Re: Emulex LP 9002
      ... IBM pSeries & AIX System Engineer ... PCI-X is backwards compatible with PCI ... I believe if you put the LP9002L card in a 32bit slot, ... I had found the compatible HBA card which is Emulex LP9002L & its ...
      (AIX-L)
    • Re: san disk
      ... yes all my music I download from WMP ... Does this relate to WMP? ... Card) 128MB built in the Memorexplayer(only the San ...
      (microsoft.public.windowsmedia.player)
    • Re: Cant access the SAN drives
      ... when i try to mirror the local drives with the san drives i get an error ... > There is most likely an incorrect setting on the card. ... > | from what i understand is the reason for disabling the fiber card from ...
      (microsoft.public.windows.server.clustering)