SATA

Hi,

I am trying to install FreeBSD on an HP-server with SATA controller. I
have problems detecting the Hard disk while it detects correctly the
controller.
I tried to use 6.0-Stable (cvsup 30/01/06) and still can't detect the
disk, here are a part of the dmesg (boot with verbose) :
atapci0 : <Intel ICH5 SATA150 controller> port .....
ata0 : <ATA channel 0> on atapci0
ata1 : <ATA channel 1> on atapci0
.....
.....
ata0 : reiniting channel ...
ata0 : reset tcp1 mask=03 ostat0=58 ostat1=01
ata0 : stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0 : stat1=0x01 err=0x01 lsb=0x01 msb=0x01
ata0 : reset tp2 stat0=00 stat1=01 devices=0x4(ATAPI_MASTAER)

then i get almost the same with the slave and both ata1 and in the end
no harddisk detected.

Is there a way to make it work? (hinting the kernel or whatever)

NB: it works well with freebsd 4 (no SATA but only ide/udma).

Thanks a lot for your help
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: [9fans] Installing Plan 9 on a ICH9 SATA controller.
    ... Has you try to put the sata controller in legacy pata or something like? ... I've tried to install Plan 9 on my new computer and I'm having trouble with the SATA controller. ... If I have AHCI mode enabled in BIOS: ... It seems in AHCI mode it can access hard disk just fine, but it can't access the DVD drive. ...
    (comp.os.plan9)
  • serial ATA or UDMA133
    ... I have a PIII PC and would like to use it to install FreeBSD 5.4. ... But the existing hard disk has bad sector, ...
    (comp.unix.bsd.freebsd.misc)
  • Re: serial ATA or UDMA133
    ... > I have a PIII PC and would like to use it to install FreeBSD 5.4. ... > But the existing hard disk has bad sector, ...
    (comp.unix.bsd.freebsd.misc)
  • Re: SATA Hard Disk drivers
    ... > saying that you need to manually choose a driver for it. ... > get any for the hard disk. ... You need a driver for your SATA controller on the motherboard, ...
    (comp.os.linux.hardware)
  • panic: ffs_valloc: dup_alloc
    ... I'm trying to install FreeBSD 5.3 from CD on a machine that previously ran ... I upgraded the system and put two new hard disk ... motherboard: Gigabyte 8KNXP ... John ...
    (comp.unix.bsd.freebsd.misc)