Re: bge stopped working with latest 6.0-stable
- From: Mike Tancsa <mike@xxxxxxxxxx>
- Date: Tue, 31 Jan 2006 10:42:28 -0500
At 10:29 AM 31/01/2006, Danny Braniss wrote:
with the latest cvsup - this morning - the bge stopped working.
There was other breakage at the same time that got commited. Can you add Rev 1.292.2.7 of pci.c ?
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/pci/pci.c
I am using the lastest in the tree and it works for me on my PCI-e versions of the NICs
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:10:18:14:15:12
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xd3000000-0xd300ffff irq 19 at device 0.0 on pci4
miibus2: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:10:18:14:38:d2
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet 172.29.13.4 netmask 0xffffff00 broadcast 172.29.13.255 ether 00:10:18:14:15:12 media: Ethernet autoselect (1000baseTX <full-duplex>) status: active
... bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xefcf0000-0xefcfffff irq 11 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:12:3f:96:c0:ad ... Trying to mount root from nfs: NFS ROOT: 132.65.16.112:/d/8 bge0: link state changed to DOWN bge0: link state changed to UP
and now all is stuck. unplugging/plugging seems to be recognized.
btw, the last working version that i have is: __FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.91.2.8 2006/01/13 19:21:43 glebius Exp $")
thanks,
danny
_______________________________________________ freebsd-stable@xxxxxxxxxxx mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
_______________________________________________ freebsd-stable@xxxxxxxxxxx mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: bge stopped working with latest 6.0-stable
- From: Danny Braniss
- Re: bge stopped working with latest 6.0-stable
- References:
- bge stopped working with latest 6.0-stable
- From: Danny Braniss
- bge stopped working with latest 6.0-stable
- Prev by Date: bge stopped working with latest 6.0-stable
- Next by Date: Re: Linksys WPC54g v4, NDIS, & Kernel Panics
- Previous by thread: bge stopped working with latest 6.0-stable
- Next by thread: Re: bge stopped working with latest 6.0-stable
- Index(es):
Relevant Pages
|
|