freebsd-stable

• Thread Index

---

• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Dominic Marks
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Dominic Marks
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Peter Jeremy
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Chris
• boot order changed (atapicam)
  • From: Norbert Augenstein
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Sam Leffler
• Re: [patch[ twa, bus_dma.h, busdma_machdep.c (amd64)
  • From: Kim Culhan
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: JoaoBR
• Re: [patch[ twa, bus_dma.h, busdma_machdep.c (amd64)
  • From: Scott Long
• [patch[ twa, bus_dma.h, busdma_machdep.c (amd64)
  • From: Sean Bryant
• Re: 6.1 prerelease graid3 livelock?
  • From: Bradley W. Dutton
• Re: geli password prompt does not work
  • From: Martin
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• coda6
  • From: Dmitriy Kirhlarov
• Re: CFT: new ath hal
  • From: Sascha Luck
• Re: geli password prompt does not work
  • From: Pawel Jakub Dawidek
• Commonwealth NetBank Account Information
  • From: Commonwealth Bank
• Re: 5.4 postfix no longer logging
  • From: jason
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: Fast IPSEC issue
  • From: David Malone
• Fast IPSEC issue
  • From: Stephen Clark
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Dmitry Pryanishnikov
• Re: HP DL145G2 SCSC Raid Controlle Q
  • From: kama
• Re: powernow0: no match for extended cpuid 780
  • From: Stefan 'Steve' Tell
• Re: powernow0: no match for extended cpuid 780
  • From: Bruno Ducrot
• Re: LOR
  • From: Bjoern A. Zeeb
• Re: DMA timeouts with Adapter ASH-1205SA SATA PCI Card
  • From: Igor Robul
• Re: geli password prompt does not work
  • From: Martin
• if_bfe and > 1 GB of ram is now fixed
  • From: Mike Silbersack
• Re: link_elf: symbol cam_simq_alloc undefined
  • From: Eugene M. Kim
• Re: link_elf: symbol cam_simq_alloc undefined
  • From: Scott Long
• Re: link_elf: symbol cam_simq_alloc undefined
  • From: Eugene M. Kim
• Re: 6.1 prerelease graid3 livelock?
  • From: Bradley W. Dutton
• Re: link_elf: symbol cam_simq_alloc undefined
  • From: John-Mark Gurney
• link_elf: symbol cam_simq_alloc undefined
  • From: Eugene M. Kim
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: 6.1 prerelease graid3 livelock?
  • From: Bradley W. Dutton
• BioStar Tforce4 6100-939 MB with Nvidia Nforce 410 chipset
  • From: Stephen Clark
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Doug Hardie
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Mike Jakubik
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Mike Jakubik
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Bartosz Fabianowski
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: ml@xxxxxxxx
• Re: geli password prompt does not work
  • From: Pawel Jakub Dawidek
• Re: powernow0: no match for extended cpuid 780
  • From: Stefan 'Steve' Tell
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: ml@xxxxxxxx
• Re: geli password prompt does not work
  • From: Martin
• Re: RELENG_4 -> 5 -> 6: significant performance regression
  • From: Kris Kennaway
• Re: 6.1 prerelease graid3 livelock?
  • From: Pawel Jakub Dawidek
• Re: console on sioN (not 0), RELENG_6
  • From: David Wolfskill
• Re: console on sioN (not 0), RELENG_6
  • From: Dmitry Morozovsky
• Re: console on sioN (not 0), RELENG_6
  • From: Dmitriy Kirhlarov
• console on sioN (not 0), RELENG_6
  • From: Dmitry Morozovsky
• Re: DMA timeouts with Adapter ASH-1205SA SATA PCI Card
  • From: Tim Soderstrom
• RELENG_4 -> 5 -> 6: significant performance regression
  • From: Dmitry Pryanishnikov
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Alexey Karagodov
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Massimo Lusetti
• Re: 6.1 prerelease graid3 livelock?
  • From: Pawel Jakub Dawidek
• Re: 5.4 postfix no longer logging
  • From: David Nugent
• Re: graphics/cairo build error
  • From: Kris Kennaway
• graphics/cairo build error
  • From: Ryan Shin
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Stephen Clark
• Re: fsck_ufs locked in snaplk
  • From: Adrian Wontroba
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: JoaoBR
• Re: DMA timeouts with Adapter ASH-1205SA SATA PCI Card
  • From: Dominic Marks
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Stephen Clark
• Re: geli password prompt does not work
  • From: Pawel Jakub Dawidek
• Re: geli password prompt does not work
  • From: Martin
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Stephen Clark
• 6.x stable
  • From: Stephen Clark
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Stephen Clark
• kbdmux breaks keyboard LEDs
  • From: ian j hart
• Re: geli password prompt does not work
  • From: Pawel Jakub Dawidek
• geli password prompt does not work
  • From: Martin
• Re: powernow0: no match for extended cpuid 780
  • From: Bruno Ducrot
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Kostik Belousov
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Sam Leffler
• Re: fsck_ufs locked in snaplk
  • From: secmgr
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Robert Watson
• Re: fsck_ufs locked in snaplk
  • From: Pawel Jakub Dawidek
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Sam Leffler
• Re: fsck_ufs locked in snaplk
  • From: Chris Dillon
• LOR
  • From: Vlad GALU
• 5.4 postfix no longer logging
  • From: jason
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Mike Tancsa
• Re: fsck_ufs locked in snaplk
  • From: Kostik Belousov
• Re: ipfw problems?
  • From: Oleg Bulyzhin
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Stephen Clark
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Stephen Clark
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: JoaoBR
• Re: ipfw problems?
  • From: Ivan Voras
• Re: /usr/libexec/save-entropy, IPv4: not found
  • From: Pete French
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• DMA timeouts with Adapter ASH-1205SA SATA PCI Card
  • From: Tim Soderstrom
• Re: HP DL145G2 SCSC Raid Controlle Q
  • From: Matthew Jacob
• [PANIC] SMP Kernel Panic in 6.1-RC1 during mount root filesystem
  • From: Ying-Chih Kuo
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Sam Leffler
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Atanas
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Sam Leffler
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Douglas Berry
• Re: ipfw problems?
  • From: Oleg Bulyzhin
• Re: /usr/libexec/save-entropy, IPv4: not found
  • From: Doug Barton
• Re: fsck_ufs locked in snaplk
  • From: JoaoBR
• Re: fsck_ufs locked in snaplk
  • From: Vlad Skvortsov
• CFT: new ath hal
  • From: Sam Leffler
• Re: fsck_ufs locked in snaplk
  • From: Mike Jakubik
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Torfinn Ingolfsen
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Mike Jakubik
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Sam Leffler
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: JoaoBR
• Re: ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Sam Leffler
• ath0: ath_chan_set: unable to reset channel 5 (2432 Mhz, flags 0x3e0 hal flags 0x140)
  • From: Douglas Berry
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Mike Tancsa
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Stephen Clark
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Kostik Belousov
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Updated 6.1 schedule?
  • From: Thomas David Rivers
• Re: fsck_ufs locked in snaplk
  • From: Kostik Belousov
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: fsck_ufs locked in snaplk
  • From: Chris Dillon
• Re: Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Mike Tancsa
• Re: fsck_ufs locked in snaplk
  • From: Kostik Belousov
• Freebsd Stable 6.x ipsec slower than with 4.9
  • From: Stephen Clark
• Re: fsck_ufs locked in snaplk
  • From: Chris Dillon
• Re: ipfw problems?
  • From: Ivan Voras
• ipfw problems?
  • From: Ivan Voras
• RE: Stable Build Error
  • From: Lawrence Farr
• /usr/libexec/save-entropy, IPv4: not found
  • From: Pete French
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: 6.1RC system nearly freezing
  • From: Henri Hennebert
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: 6.1RC system nearly freezing
  • From: Kris Kennaway
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: 6.1RC system nearly freezing
  • From: Henri Hennebert
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: 6.1RC system nearly freezing
  • From: Robert Watson
• Re: 6.1RC system nearly freezing
  • From: Henri Hennebert
• Re: fsck_ufs locked in snaplk
  • From: Michael Butler
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• Re: HP DL145G2 SCSC Raid Controlle Q
  • From: Thomas Krause
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: HP DL145G2 SCSC Raid Controlle Q
  • From: Dmitry Morozovsky
• Re: Stable Build Error
  • From: Brooks Davis
• Stable Build Error
  • From: Lawrence Farr
• Stable Build Error
  • From: Lawrence Farr
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Stephen Clark
• HP DL145G2 SCSC Raid Controlle Q
  • From: Thomas Krause
• Re: 6.1 prerelease graid3 livelock?
  • From: Pawel Jakub Dawidek
• Re: FreeBSD 6.1-PRERELEASE (April 5, 2006) randomly rebooting on Dell Poweredge 650
  • From: Robert Watson
• Re: 6.1RC system nearly freezing
  • From: Robert Watson
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Robert Watson
• Re: Intel EtherExpress Pro ISA card
  • From: Vladimir Botka
• Re: fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: fsck_ufs locked in snaplk
  • From: Kris Kennaway
• 6.1 prerelease graid3 livelock?
  • From: Bradley W. Dutton
• fsck_ufs locked in snaplk
  • From: Dmitry Morozovsky
• Re: Intel EtherExpress Pro ISA card
  • From: Joseph Olatt
• dsl-acc go2net
  • From: Thomas Krause
• Re: 4-STABLE panic, samba related maybe?
  • From: Mark Cullen
• Some zope documentation
  • From: Low Kian Seong
• Re: CPUTYPE for FreeBSD AMD64 running on a Pentium D
  • From: Mike Jakubik
• Re: Intel EtherExpress Pro ISA card
  • From: Igor Pokrovsky
• Re: CPUTYPE for FreeBSD AMD64 running on a Pentium D
  • From: Roland Smith
• CPUTYPE for FreeBSD AMD64 running on a Pentium D
  • From: Pierre-Luc Drouin
• Re: iir + Tyan S2460 + SMP problems
  • From: Douglas K. Rand
• Re: portsnap mirror servers
  • From: Yousef Raffah
• Re: portsnap mirror servers
  • From: Martin Jackson
• Re: portsnap mirror servers
  • From: Martin Jackson
• Re: portsnap mirror servers
  • From: Yousef Raffah
• 4-STABLE panic, samba related maybe?
  • From: Mark Cullen
• irq question
  • From: Zoran Kolic
• Re: iir + Tyan S2460 + SMP problems
  • From: Scott Long
• Re: FreeBSD 6.1-PRERELEASE (April 5, 2006) randomly rebooting on Dell Poweredge 650
  • From: Darren Pilgrim
• Re: FreeBSD 6.1-PRERELEASE (April 5, 2006) randomly rebooting on Dell Poweredge 650
  • From: Adriaan Stable
• Re: iir + Tyan S2460 + SMP problems
  • From: John-Mark Gurney
• Re: iir + Tyan S2460 + SMP problems
  • From: Douglas K. Rand
• Re: iir + Tyan S2460 + SMP problems
  • From: John-Mark Gurney
• iir + Tyan S2460 + SMP problems
  • From: Douglas K. Rand
• Fwd: Prototyping for basejail distribuition
  • From: Ricardo A. Reis
• RE: Intel EtherExpress Pro ISA card
  • From: Matt Smith
• Re: portsnap mirror servers
  • From: Colin Percival
• Re: portsnap mirror servers
  • From: Paul Mather
• powernow0: no match for extended cpuid 780
  • From: Stefan 'Steve' Tell
• Re: SSH debug messages
  • From: Michael Vince
• Re: portsnap mirror servers
  • From: Benjamin Lutz
• SSH debug messages
  • From: Michael Vince
• Re: ipw + WPA not working on 6.1-RC
  • From: Bartosz Fabianowski
• Re: swi4: clock sio uses 10% cpu
  • From: Holger Kipp
• Re: swi4: clock sio uses 10% cpu
  • From: Helge Oldach
• ipw + WPA not working on 6.1-RC
  • From: Ulrich Spoerlein
• Re: ypwhich -m
  • From: Brooks Davis
• Re: shutting off the internal Sendmail Daemom
  • From: Bartosz Fabianowski
• Re: shutting off the internal Sendmail Daemom
  • From: Freddie Cash
• Re: shutting off the internal Sendmail Daemom
  • From: Alex de Kruijff
• Re: shutting off the internal Sendmail Daemom
  • From: Bartosz Fabianowski
• Re: shutting off the internal Sendmail Daemom
  • From: Sh4d03
• RE: shutting off the internal Sendmail Daemom
  • From: Matt Smith
• swi4: clock sio uses 10% cpu
  • From: Holger Kipp
• Re: "smb_maperror: Unmapped error 1:158"----[FreeBSD 4.11-RELEASE, samba-3.0.10, 1 , samba-libsmbclient-3.0.10_1]
  • From: Michael Zach
• RE: em (+pf+vlan+bridge+netgraph) stop sending packets (?)
  • From: Yuriy Tsibizov
• Re: pitiful performance of an SATA150 drive
  • From: Jamie Bowden
• RE: em (+pf+vlan+bridge+netgraph) stop sending packets (?)
  • From: Yuriy Tsibizov
• DOH! ata_alloc_request failed!
  • From: Mars G. Miro
• Re: em (+pf+vlan+bridge+netgraph) stop sending packets (?)
  • From: Andrew Thompson
• Re: ath compile error on releng_5
  • From: JoaoBR
• Too old GDB in 6.0
  • From: Václav Haisman
• RE: em (+pf+vlan+bridge+netgraph) stop sending packets (?)
  • From: Yuriy Tsibizov
• Re: 6.1RC system nearly freezing
  • From: Alexey Karagodov
• Re: em (+pf+vlan+bridge+netgraph) stop sending packets (?)
  • From: Alexey Karagodov
• 6.1RC system nearly freezing
  • From: Henri Hennebert
• Re: ypwhich -m
  • From: Scott Long
• Re: wpa_supplicant and wi
  • From: Sam Leffler
• Re: wpa_supplicant and wi
  • From: Sam Leffler
• Re: ath compile error on releng_5
  • From: Sam Leffler
• Re: ath compile error on releng_5
  • From: Peter Wemm
• Re: ypwhich -m
  • From: Brooks Davis
• Re: wpa_supplicant and wi
  • From: Kevin Oberman
• ypwhich -m
  • From: Rong-En Fan
• Re: ssh- lagging logins
  • From: David Magda
• Re: wpa_supplicant and wi
  • From: Isaac Waldron
• wpa_supplicant and wi
  • From: Isaac Waldron
• ath compile error on releng_5
  • From: JoaoBR
• Re: kouwell ata raid
  • From: Dominic Marks
• kouwell ata raid
  • From: Ondra Holecek
• Re: Tyan K8WE BIOS v1.03 and -STABLE
  • From: jdow
• Re: Tyan K8WE BIOS v1.03 and -STABLE
  • From: Thomas Hurst
• em (+pf+vlan+bridge+netgraph) stop sending packets (?)
  • From: Yuriy Tsibizov
• Re: portsnap mirror servers
  • From: Simon L. Nielsen
• Re: portsnap mirror servers
  • From: Oliver Brandmueller
• Re: Terminal on FreeBSD 5.4
  • From: Igor Robul
• Re: ssh- lagging logins
  • From: Low Kian Seong
• AHC Panic
  • From: Cy Schubert
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Stephen Clark
• Re: portsnap mirror servers
  • From: Chris
• Re: portsnap mirror servers
  • From: Colin Percival
• RE: ssh- lagging logins
  • From: Gray Lilley
• Re: ssh- lagging logins
  • From: Kris Kennaway
• ssh- lagging logins
  • From: CyBerHigh
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Peter Jeremy
• Re: Athlon 64 X2
  • From: Stephen Clark
• Re: Athlon 64 X2
  • From: Brooks Davis
• Re: portsnap mirror servers
  • From: Marius Nuennerich
• Athlon 64 X2
  • From: Stephen Clark
• kernel: adX: FAILURE - out of memory in start
  • From: Dmitry Morozovsky
• Re: FreeBSD 6.1-PRERELEASE (April 5, 2006) randomly rebooting on Dell Poweredge 650
  • From: Yvo van Doorn
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: [LoN]Kamikaze
• Re: CPUTYPE=athlon-xp and loader
  • From: Jonathan Noack
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Stephen Clark
• Terminal on FreeBSD 5.4
  • From: Polichism
• Re: FreeBSD 4.9 losing mbufs!!!
  • From: Nikos Vassiliadis
• FreeBSD 6.1-PRERELEASE (April 5, 2006) randomly rebooting on Dell Poweredge 650
  • From: Matt Watson
• FreeBSD 4.9 losing mbufs!!!
  • From: Stephen Clark
• Re: How to change hardware clock
  • From: Cristiano Deana
• Re: panic: softdep_move_dependencies: need merge code (driver mtp(4)?)
  • From: Dmitry Pryanishnikov
• Re: How to change hardware clock
  • From: Cristiano Deana
• Re: CPUTYPE=athlon-xp and loader
  • From: Evren Yurtesen
• Re: CPUTYPE=athlon-xp and loader
  • From: Evren Yurtesen
• Re: panic: softdep_move_dependencies: need merge code (driver mtp(4)?)
  • From: Scott Long
• Re: panic: softdep_move_dependencies: need merge code (driver mtp(4)?)
  • From: Marcus Alves Grando
• Re: portsnap mirror servers
  • From: Brooks Davis
• portsnap mirror servers
  • From: Chris
• Re: CPUTYPE=athlon-xp and loader
  • From: Kim Culhan
• Re: CPUTYPE=athlon-xp and loader
  • From: James Long
• Re: USB & ACPI getting better but not quite there - IBM T42p
  • From: Georg-W. Koltermann
• Re: bge0 problem on 6.1-PR
  • From: Oleg Bulyzhin
• Re: [LOR] bpf vs. USB (perhaps #147?)
  • From: Bjoern A. Zeeb
• Re: CPUTYPE=athlon-xp and loader
  • From: Jonathan Noack
• Re: CPUTYPE=athlon-xp and loader
  • From: Sergey Kovalev
• failing PXE boot/HP-DL145
  • From: Danny Braniss
• Re: CPUTYPE=athlon-xp and loader
  • From: Evren Yurtesen
• help, after cvsup - erros on HDD and ICH5, FAILURE READ_DMA48
  • From: GreenX FreeBSD
• Re: How to change hardware clock
  • From: Daniel O'Connor
• disklabel backups
  • From: Peter Hoskin
• Re: CPUTYPE=athlon-xp and loader
  • From: Bartosz Fabianowski
• Tyan K8WE BIOS v1.03 and -STABLE
  • From: Damian Gerow
• Re: CPUTYPE=athlon-xp and loader
  • From: [LoN]Kamikaze
• Re: pitiful performance of an SATA150 drive
  • From: Mikhail Teterin
• CPUTYPE=athlon-xp and loader
  • From: Evren Yurtesen
• [LOR] bpf vs. USB (perhaps #147?)
  • From: Ulrich Spoerlein
• Re: Disappointed
  • From: kama
• [releng_5 tinderbox] failure on i386/pc98
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on i386/i386
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on i386/pc98
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on amd64/amd64
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on sparc64/sparc64
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on i386/i386
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on alpha/alpha
  • From: FreeBSD Tinderbox
• [releng_5 tinderbox] failure on sparc64/sparc64
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on i386/i386
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on alpha/alpha
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on amd64/amd64
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on sparc64/sparc64
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on i386/pc98
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on i386/pc98
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on sparc64/sparc64
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on i386/i386
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on amd64/amd64
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on alpha/alpha
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on i386/pc98
  • From: FreeBSD Tinderbox
• [releng_6 tinderbox] failure on i386/i386
  • From: FreeBSD Tinderbox
• Re: panic: softdep_move_dependencies: need merge code (driver mtp(4)?)
  • From: Scott Long
• USB & ACPI getting better but not quite there - IBM T42p
  • From: Georg-W. Koltermann
• panic: softdep_move_dependencies: need merge code (driver mtp(4)?)
  • From: Marcus Alves Grando
• [LOR] udpinp
  • From: Ulrich Spoerlein
• Re: [LOR] udpinp
  • From: Bjoern A. Zeeb
• Re: How to change hardware clock
  • From: Daniel O'Connor
• RE: How to change hardware clock
  • From: Mare Negrocan
• Re: How to change hardware clock
  • From: Giorgos Kapetanakis
• How to change hardware clock
  • From: Mare Negrocan
• Sound problem w/ 6.1-RC and ASUS A8V-MX (VIA VT8233X)
  • From: George Hartzell
• Re: powerd not behaving with an Asus A8V-MX and Athlon 64 X2 3800+
  • From: George Hartzell
• Re: kernel build failure with bce
  • From: Plamen Stoev
• Re: burncd failures on RC-1?
  • From: Sergey N. Voronkov
• FreeBSD Status Report First Quarter 2006
  • From: Max Laier
• burncd failures on RC-1?
  • From: Jonathan Chen
• Re: Disappointed
  • From: Andrew Reilly
• kernel build failure with bce
  • From: Sean McNeil
• Re: 6.1RC1: Unable to select Minimal distribution
  • From: ian j hart
• Default ICMP rate limiting changes from 5.4 to 6.x?
  • From: Vinny Abello
• Re: devfs.conf and pass0
  • From: JoaoBR
• Re: devfs.conf and pass0
  • From: Kevin Oberman
• Re: 6.1RC1: Unable to select Minimal distribution
  • From: Jung-uk Kim
• Re: devfs.conf and pass0
  • From: JoaoBR
• Re: devfs.conf and pass0
  • From: Duane Whitty
• Re: devfs.conf and pass0
  • From: JoaoBR
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: Joe Altman
• Re: IP_MAX_MEMBERSHIPS
  • From: Bruce M Simpson
• Re: FreeBSD 6.0 panics - sbdrop
  • From: Konstantin Saurbier
• Re: devfs.conf and pass0
  • From: Duane Whitty
• Re: 6.1RC1: Unable to select Minimal distribution
  • From: Jung-uk Kim
• Re: devfs.conf and pass0
  • From: Fabian Keil
• Re: FreeBSD 6.0 panics - sbdrop
  • From: Konstantin Saurbier
• Re: 6.1-RC1 fails to compile... missing header files in /usr/src/gnu/usr.bin/groff/src/libs/libgroff?
  • From: Jeffrey Racine
• Re: 6.1-RC1 fails to compile... missing header files in /usr/src/gnu/usr.bin/groff/src/libs/libgroff?
  • From: Mike Tancsa
• 6.1-RC1 fails to compile... missing header files in /usr/src/gnu/usr.bin/groff/src/libs/libgroff?
  • From: Jeffrey Racine
• Re: Build kernel fails after cvsup tag=RELENG_6_1
  • From: Ruslan Ermilov
• bge0 problem on 6.1-PR
  • From: SungGON Yi.
• Build kernel fails after cvsup tag=RELENG_6_1
  • From: J Hendriks
• pear port install problem
  • From: Riccardo Giuntoli
• Re: IP_MAX_MEMBERSHIPS
  • From: Stephen Clark
• Re: IP_MAX_MEMBERSHIPS
  • From: Stephen Clark
• Re: devfs.conf and pass0
  • From: JoaoBR
• Re: devfs.conf and pass0
  • From: Fabian Keil
• Re: Disappointed
  • From: MC
• devfs.conf and pass0
  • From: JoaoBR
• Re: FreeBSD 6.1-RC1 Available
  • From: Albert Shih
• 6.1RC1: Unable to select Minimal distribution
  • From: Pieter de Goeje
• Re: FreeBSD 6.1-RC1 Available
  • From: Scott Long
• Re: FreeBSD 6.1-RC1 Available
  • From: Colin Percival
• FreeBSD 6.1-RC1 Available
  • From: Scott Long
• Re: FreeBSD 6.0 panics - sbdrop
  • From: Robert Watson
• Re: IP_MAX_MEMBERSHIPS
  • From: Robert Watson
• Re: Instant crash with FreeBSD 6.1-RC and 4GB RAM
  • From: Francois Tigeot
• Re: IP_MAX_MEMBERSHIPS
  • From: Bruce M Simpson
• Re: IP_MAX_MEMBERSHIPS
  • From: Bruce M Simpson
• RE: ICH7 SATA RAID Broken, Was (Re: Timescale for 6.1-RELEASE...)
  • From: Ted Mittelstaedt
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: Igor Robul
• Re: IP_MAX_MEMBERSHIPS
  • From: Nik
• Re: Disappointed
  • From: Norberto Meijome
• IP_MAX_MEMBERSHIPS
  • From: Stephen Clark
• Storage container for servers & switches
  • From: Phusion
• ICH7 SATA RAID Broken, Was (Re: Timescale for 6.1-RELEASE...)
  • From: Nikolas Britton
• Re: Instant crash with FreeBSD 6.1-RC and 4GB RAM
  • From: Alexey Karagodov
• Re: swap performance under 6.1
  • From: Kris Kennaway
• Re: swap performance under 6.1
  • From: David E. Cross
• 6.1-BETA4: NIC doesn't work with ACPI enabled
  • From: Morgan Wesström
• Re: Instant crash with FreeBSD 6.1-RC and 4GB RAM
  • From: Francois Tigeot
• Re: Instant crash with FreeBSD 6.1-RC and 4GB RAM
  • From: Kris Kennaway
• Instant crash with FreeBSD 6.1-RC and 4GB RAM
  • From: Francois Tigeot
• Re: FreeBSD 6.0 panics - sbdrop
  • From: Rutger Bevaart
• Re: swap performance under 6.1
  • From: Garance A Drosihn
• IBM xSeries 440 and FreeBSD 6.1-RC
  • From: Sergey A. Osokin
• Fatal trap 12: page fault while in kernel mode
  • From: Cedric Tabary
• Re: swap performance under 6.1
  • From: Scott Long
• Re: swap performance under 6.1
  • From: Kris Kennaway
• Re: swap performance under 6.1
  • From: Garance A Drosihn
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: George Hartzell
• powerd not behaving with an Asus A8V-MX and Athlon 64 X2 3800+
  • From: George Hartzell
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: George Hartzell
• Re: Command doesn't run from Crontab ?
  • From: Cristiano Deana
• Re: devfs weirdness with kqemu
  • From: Craig Boston
• Re: Needs suggestion for redundant Storage
  • From: Michael Schuh
• Re: bruteforce
  • From: Dmitry Pryanishnikov
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: Igor Robul
• Re: Disappointed
  • From: Robert Watson
• Re: panic: vinvalbuf: dirty bufs on 6.1-RC
  • From: Peter Jeremy
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: Vladimir Botka
• Re: Pros and Cons of amd64 (versus i386).
  • From: Tuomo Latto
• Re: PAE and gvinum
  • From: Stoyan Dimov
• Re: swap performance under 6.1
  • From: Kris Kennaway
• Re: bruteforce
  • From: Damian Gerow
• Re: bruteforce
  • From: Adam Stroud
• Re: bruteforce
  • From: Adam Stroud
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: Seán C. Farley
• Re: Xorg hang on recent 6.1 build
  • From: Robert Whamond
• Re: help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: Scott Robbins
• help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
  • From: George Hartzell
• Re: Odd "phantom MFS mountpoint" issue
  • From: Brian Fundakowski Feldman
• swap performance under 6.1
  • From: David E. Cross
• Re: high interrupt load under 6.0?
  • From: David E. Cross
• Re: Maximum Swapsize
  • From: Matthew Dillon
• Re: panic: vinvalbuf: dirty bufs on 6.1-RC
  • From: Kris Kennaway
• Re: Maximum Swapsize
  • From: Kris Kennaway
• Re: Maximum Swapsize
  • From: Kris Kennaway
• Re: Needs suggestion for redundant Storage
  • From: Peter Jeremy
• Re: bruteforce
  • From: Patrick Tracanelli
• Re: Maximum Swapsize
  • From: John-Mark Gurney
• Re: Re[2]: bruteforce
  • From: Jordan Sissel
• Re[2]: bruteforce
  • From: Daniel Gerzo
• Re: bruteforce
  • From: Dmitriy Kirhlarov
• panic: vinvalbuf: dirty bufs on 6.1-RC
  • From: Anton Yuzhaninov
• Re: truss problems
  • From: Jonas Wolz
• Re: truss problems
  • From: Dan Nelson
• Serial ATA Errors
  • From: Holtor
• FreeBSD 6.0 panics - sbdrop
  • From: Konstantin Saurbier
• Re: truss problems
  • From: Jonas Wolz
• Re: bruteforce
  • From: Daniel O'Connor
• Re: Needs suggestion for redundant Storage
  • From: Michael Schuh
• Re: Maximum Swapsize
  • From: Michael Schuh
• Re: Maximum Swapsize
  • From: Steve O'Hara-Smith
• Re: Maximum Swapsize
  • From: Peter Jeremy
• bruteforce
  • From: Matteo 'egon' Baldi
• Re: Command doesn't run from Crontab ?
  • From: Adrian
• Re: Command doesn't run from Crontab ?
  • From: Dmitriy Kirhlarov
• Re: Iomega REV Drive
  • From: Igor Robul
• Command doesn't run from Crontab ?
  • From: Adrian
• Re: How can I install a driver?
  • From: Daniel O'Connor
• Re: GEOM_RAID3: Device datos is broken, too few valid components
  • From: Ruslan Ermilov
• Re: Maximum Swapsize
  • From: David Magda
• Re: Maximum Swapsize
  • From: Tony Maher
• Re: How can I install a driver?
  • From: Chris H.
• Re: Maximum Swapsize
  • From: Mark Andrews
• Re: Maximum Swapsize
  • From: Pete Slagle
• Re: How can I install a driver?
  • From: Daniel O'Connor
• Re: Maximum Swapsize
  • From: Daniel O'Connor
• Re: Disappointed
  • From: JoaoBR
• Re: Disappointed
  • From: David Magda
• Re: How can I install a driver?
  • From: Chris H.
• Re: Odd "phantom MFS mountpoint" issue
  • From: H. Wade Minter
• Re: Needs suggestion for redundant Storage
  • From: Brian K. White
• Re: Odd "phantom MFS mountpoint" issue
  • From: Michael Proto
• Re: Odd "phantom MFS mountpoint" issue
  • From: H. Wade Minter
• Re: Odd "phantom MFS mountpoint" issue
  • From: Michael Proto
• Odd "phantom MFS mountpoint" issue
  • From: H. Wade Minter
• Re: Disappointed-new
  • From: Zaphod Beeblebrox
• Re: Needs suggestion for redundant Storage
  • From: Peter Jeremy
• Re: devfs weirdness with kqemu
  • From: Vivek Khera
• Re: Pros and Cons of amd64 (versus i386).
  • From: Matthew D. Fuller
• Re: Maximum Swapsize
  • From: Kris Kennaway
• Maximum Swapsize
  • From: Michael Schuh
• Iomega REV Drive
  • From: Thomas Krause
• Re: How can I install a driver?
  • From: Fabian Keil
• Re: Pros and Cons of amd64 (versus i386).
  • From: Christian Lopez de Castilla Wagner
• Re: GEOM_RAID3: Device datos is broken, too few valid components
  • From: José M. Fandiño
• How can I install a driver?
  • From: Yousef Raffah
• Re: Needs suggestion for redundant Storage
  • From: Michael Schuh
• Re: truss problems
  • From: Fabian Keil
• Re: sio+acpi woes on HP DL145 G2
  • From: Dmitry Morozovsky
• Re: Pros and Cons of amd64 (versus i386).
  • From: Pete French
• truss problems
  • From: Jonas Wolz
• Re: Disappointed-new
  • From: Peter Jeremy
• "smb_maperror: Unmapped error 1:158"----[FreeBSD 4.11-RELEASE, samba-3.0.10, 1 , samba-libsmbclient-3.0.10_1]
  • From: dyd_281
• nwfs panic
  • From: Michael Metzger
• Re: sio+acpi woes on HP DL145 G2
  • From: Paul Saab
• Re: Disappointed-new
  • From: Scott Long
• Re: Disappointed-new
  • From: Zaphod Beeblebrox
• Re: splash
  • From: martinko
• Re: Pros and Cons of amd64 (versus i386).
  • From: Chris H.
• Re: [panic] ipw and kismet
  • From: Ulrich Spoerlein
• Re: Pros and Cons of amd64 (versus i386).
  • From: Matthew D. Fuller
• network pertfomance low with RELENG_6_0 from 2nd of march
  • From: odi
• Re: [panic] ipw and kismet
  • From: Max Laier
• Re: resolver doesn't see resolv.conf changes
  • From: Ulrich Spoerlein
• devfs weirdness with kqemu
  • From: Juergen Lock
• Re: Call for FreeBSD Status Reports
  • From: Max Laier
• Re: resolver doesn't see resolv.conf changes
  • From: Hajimu UMEMOTO
• Re: resolver doesn't see resolv.conf changes
  • From: Ulrich Spoerlein
• Re: resolver doesn't see resolv.conf changes
  • From: Ulrich Spoerlein
• Re: [panic] ipw and kismet
  • From: Ulrich Spoerlein
• Re: serial console installation of 6.1-BETA4
  • From: Kim Culhan
• Re: Prism wi support in 6.x - or alternative card
  • From: Fabian Keil
• Re: sio+acpi woes on HP DL145 G2
  • From: Mars G. Miro
• Re: sio+acpi woes on HP DL145 G2
  • From: Dmitry Morozovsky
• Re: sio+acpi woes on HP DL145 G2
  • From: Mars G. Miro
• Re: sio+acpi woes on HP DL145 G2
  • From: Dmitry Morozovsky
• Re: Pros and Cons of amd64 (versus i386).
  • From: Peter Jeremy
• Re: downgrade question
  • From: Chris H.
• Re: sio+acpi woes on HP DL145 G2
  • From: Mars G. Miro
• Re: downgrade question
  • From: Daniel O'Connor
• Re: downgrade question
  • From: Joseph Koshy
• Re: downgrade question
  • From: Darren Pilgrim
• downgrade question
  • From: Chris H.
• Re: splash
  • From: Chris H.
• Re: RELENG_6_1
  • From: Scott Long
• Re: Pros and Cons of amd64 (versus i386).
  • From: Scott Long
• Re: RELENG_6_1
  • From: Rong-En Fan
• Re: RELENG_6_1
  • From: Scott Long
• Re: Pros and Cons of amd64 (versus i386).
  • From: Chris H.
• RELENG_6_1
  • From: Rong-En Fan
• Re: splash
  • From: Craig Boston
• Re: GCC in 6.0 fails to compile latest MySQL port
  • From: Václav Haisman
• Re: GCC in 6.0 fails to compile latest MySQL port
  • From: Stanislaw Halik
• Re: Pros and Cons of amd64 (versus i386).
  • From: Peter Jeremy
• Re: resolver doesn't see resolv.conf changes
  • From: Lyndon Nerenberg
• Re: resolver doesn't see resolv.conf changes
  • From: Dmitry Morozovsky
• Re: resolver doesn't see resolv.conf changes
  • From: Dmitry Pryanishnikov
• Re: Disappointed-new
  • From: Mike Tancsa
• Re: GCC in 6.0 fails to compile latest MySQL port
  • From: Václav Haisman
• Re: CPU throttling
  • From: Kris Kennaway
• Re: CPU throttling
  • From: Graham North
• Re: CPU throttling
  • From: Graham North
• Re: GCC in 6.0 fails to compile latest MySQL port
  • From: Kris Kennaway
• Re: resolver doesn't see resolv.conf changes
  • From: Dmitry Morozovsky
• Re: CPU throttling
  • From: Kris Kennaway
• Re: resolver doesn't see resolv.conf changes
  • From: Dmitry Pryanishnikov
• CPU throttling
  • From: Graham North
• Re: rpc.lockd brokenness (2)
  • From: Kris Kennaway
• Re: PAE and gvinum
  • From: Dmitry Morozovsky
• Re: Pros and Cons of amd64 (versus i386).
  • From: Dmitry Morozovsky
• Re: usb support kernel changes
  • From: Mike Jakubik
• Re: sio+acpi woes on HP DL145
  • From: Dmitry Morozovsky
• Re: resolver doesn't see resolv.conf changes
  • From: Chuck Swiger
• Re: rpc.lockd brokenness (2)
  • From: Rong-En Fan
• GCC in 6.0 fails to compile latest MySQL port
  • From: Václav Haisman
• Re: resolver doesn't see resolv.conf changes
  • From: Lowell Gilbert
• Re: resolver doesn't see resolv.conf changes
  • From: Lowell Gilbert
• Prism wi support in 6.x - or alternative card
  • From: Brian Candler
• Re: resolver doesn't see resolv.conf changes
  • From: Ulrich Spoerlein
• Re: resolver doesn't see resolv.conf changes
  • From: Ulrich Spoerlein
• Re: Wrong CPU frequency after reboot
  • From: [LoN]Kamikaze
• Re: usb support kernel changes
  • From: John-Mark Gurney
• Re: rpc.lockd brokenness (2)
  • From: Kris Kennaway
• usb support kernel changes
  • From: Mike Jakubik
• Re: rpc.lockd brokenness (2)
  • From: Rong-En Fan
• Wrong CPU frequency after reboot
  • From: Kris Kennaway
• Re: resolver doesn't see resolv.conf changes
  • From: Rostislav Krasny
• Re: [panic] ipw and kismet
  • From: Max Laier
• Re: Fatal trap 12: page fault while in kernel mode / current process=12 (swi1: net)
  • From: Vlad
• Re: Needs suggestion for redundant Storage
  • From: Chuck Swiger
• Re: resolver doesn't see resolv.conf changes
  • From: Artyom Viklenko
• Re: resolver doesn't see resolv.conf changes
  • From: Hajimu UMEMOTO
• Re: resolver doesn't see resolv.conf changes
  • From: Hajimu UMEMOTO
• Needs suggestion for redundant Storage
  • From: Michael Schuh
• sio+acpi woes on HP DL145
  • From: Mars G. Miro
• Re: Disappointed
  • From: Alexey Karagodov
• Re: Disappointed
  • From: Greg Barniskis
• Re: Pros and Cons of amd64 (versus i386).
  • From: Miguel Ramos
• Re: Disappointed
  • From: Alexey Karagodov
• Disappointed-new
  • From: Albert Shih
• Re: Disappointed
  • From: Graham Menhennitt
• Re: gmirror on existing filesystem (was Fresh install on gmirror'ed disks?)
  • From: Pawel Jakub Dawidek
• Re: GEOM_RAID3: Device datos is broken, too few valid components
  • From: José M. Fandiño
• Re: Pros and Cons of amd64 (versus i386).
  • From: Tim Middleton
• Re: No drives detected with TX4000
  • From: Mark Kirkwood
• PAE and gvinum
  • From: Stoyan Dimov
• Re: FreeBSD 6.1 Release day
  • From: Nikolas Britton
• Re: Disappointed
  • From: Chris
• Re: Disappointed
  • From: Jonathan Noack
• Re: resolver doesn't see resolv.conf changes
  • From: Lyndon Nerenberg
• Re: Disappointed
  • From: Paul Allen
• Re: Disappointed
  • From: Scott Long
• How to clear the list returned by ifconfig ipw0 list scan
  • From: Ulrich Spoerlein
• Re: Disappointed
  • From: Stephen Clark
• [panic] ipw and kismet
  • From: Ulrich Spoerlein
• resolver doesn't see resolv.conf changes
  • From: Ulrich Spoerlein
• Re: Disappointed
  • From: [LoN]Kamikaze
• Re: gmirror on existing filesystem (was Fresh install on gmirror'ed disks?)
  • From: Eric Anderson
• Re: Disappointed
  • From: Stephen Clark
• Re: Pros and Cons of amd64 (versus i386).
  • From: Peter Jeremy
• Re: Have the expanded rcorder behaviour merged to RELENG_5?
  • From: Doug Barton
• Re: Disappointed
  • From: Patrick M. Hausen
• Re: FreeBSD 6.1 Release day
  • From: Wilko Bulte
• Re: GEOM_RAID3: Device datos is broken, too few valid components
  • From: José M. Fandiño
• serial port problems
  • From: Ondra Holecek
• Re: Disappointed
  • From: Christopher Arnold
• Re: FreeBSD 6.1 Release day
  • From: Torfinn Ingolfsen
• Re: GEOM_RAID3: Device datos is broken, too few valid components
  • From: Pawel Jakub Dawidek
• Re: Disappointed
  • From: Holger Kipp
• Re: Pros and Cons of amd64 (versus i386).
  • From: Pete French
• Re: Disappointed
  • From: Wilko Bulte
• Re: Disappointed
  • From: Chuck Swiger
• Re: Disappointed
  • From: Chris H.
• Re: USB (sane) stability issues
  • From: Stefan Ehmann
• USB (sane) stability issues
  • From: Stefan Ehmann
• Re: Pros and Cons of amd64 (versus i386).
  • From: Vivek Khera
• Re: Disappointed
  • From: Igor Robul
• Re: Pros and Cons of amd64 (versus i386).
  • From: Pete French
• Re: Disappointed
  • From: Nikolas Britton
• Re: Disappointed
  • From: Michael Ekstrand
• Re: ps column header case changes
  • From: Rong-En Fan
• Re: Disappointed
  • From: Igor Robul
• Re: gmirror on existing filesystem (was Fresh install on gmirror'ed disks?)
  • From: Vivek Khera
• Re: Disappointed
  • From: Chris H.
• Re: Disappointed
  • From: Igor Robul
• Re: Pros and Cons of amd64 (versus i386).
  • From: Vivek Khera
• Re: Disappointed
  • From: Alexey Karagodov
• Re: Disappointed
  • From: JoaoBR
• Re: Disappointed
  • From: Chris H.
• Re: gmirror on existing filesystem (was Fresh install on gmirror'ed disks?)
  • From: Mike Jakubik
• Re: Disappointed
  • From: Alexey Karagodov
• Re: Disappointed
  • From: Dennis Melentyev
• Re: FreeBSD 6.1 Release day
  • From: Norbert Augenstein
• Re: Disappointed
  • From: Chris
• Re: Disappointed
  • From: [LoN]Kamikaze
• Re: Frustrating inability to boot amd64
  • From: Scot Hetzel
• port monitor suggestion please
  • From: Chris
• Re: Frustrating inability to boot amd64
  • From: Scot Hetzel
• Re: Disappointed
  • From: Artem Kuchin
• Re: Splash
  • From: Michael Schuh
• Re: Disappointed
  • From: Alexey Karagodov
• Re: bind() fd 6, family 28, port 123 at boot time
  • From: Michael Proto
• Re: splash
  • From: Chris
• Re: FreeBSD 6.1 Release day
  • From: Erik Trulsson
• installworld failure?
  • From: Krassimir Slavchev
• FreeBSD 6.1 Release day
  • From: SoHo.NET
• Re: splash
  • From: [LoN]Kamikaze
• Re: splash
  • From: Chris
• Re: splash
  • From: [LoN]Kamikaze
• Re: splash
  • From: Chris
• Re: splash
  • From: [LoN]Kamikaze
• Re: Xen-Support built-in in FreeBSD 6.1 ?
  • From: Simon Dick
• Xorg hang on recent 6.1 build
  • From: Kent Stewart
• Re: splash
  • From: Dave Symonds
• Re: gmirror on existing filesystem (was Fresh install on gmirror'ed disks?)
  • From: Pawel Jakub Dawidek
• Xen-Support built-in in FreeBSD 6.1 ?
  • From: Roger Grosswiler
• splash
  • From: Daniel Anson
• Pros and Cons of amd64 (versus i386).
  • From: Nikolas Britton
• Re: ps column header case changes
  • From: Garance A Drosehn
• ps column header case changes
  • From: Rong-En Fan
• No drives detected with TX4000
  • From: Mark Kirkwood
• Re: Frustrating inability to boot amd64
  • From: David Gilbert
• Re: bind() fd 6, family 28, port 123 at boot time
  • From: Mark Andrews
• Re: Frustrating inability to boot amd64
  • From: Jack Vogel
• Re: cron jobs running 6 times
  • From: Doug Hardie
• Frustrating inability to boot amd64
  • From: David Gilbert
• Re: cron jobs running 6 times
  • From: jason
• bind() fd 6, family 28, port 123 at boot time
  • From: Miguel
• Re: smartmontools and latest 6.1 prerelease
  • From: Mike Tancsa
• Re: smartmontools and latest 6.1 prerelease
  • From: Mike Jakubik
• Re: Disappointed
  • From: Mark Linimon
• Re: Disappointed
  • From: Mike Tancsa
• Re: smartmontools and latest 6.1 prerelease
  • From: Kris Kennaway
• Re: Disappointed
  • From: Kris Kennaway
• Re: Disappointed
  • From: Claus Guttesen
• Re: smartmontools and latest 6.1 prerelease
  • From: Mike Tancsa
• Re: cron jobs running 6 times
  • From: Chris
• Re: Disappointed
  • From: Albert Shih
• Re: smartmontools and latest 6.1 prerelease
  • From: Kris Kennaway
• Re: Disappointed
  • From: Kris Kennaway
• Re: smartmontools and latest 6.1 prerelease
  • From: Markus Trippelsdorf
• Re: Disappointed
  • From: Albert Shih
• Re: Disappointed
  • From: Kris Kennaway
• Re: Disappointed
  • From: Kris Kennaway
• Disappointed
  • From: Albert Shih
• Re: smartmontools and latest 6.1 prerelease
  • From: Mike Tancsa
• smartmontools and latest 6.1 prerelease
  • From: Markus Trippelsdorf
• Re: cron jobs running 6 times
  • From: jason
• Re: cron jobs running 6 times
  • From: Peter Jeremy
• Re: something changed with 'ps' ?
  • From: Garance A Drosehn
• Re: something changed with 'ps' ?
  • From: Michael Butler
• Re: something changed with 'ps' ?
  • From: Kostik Belousov
• Re: serial console installation of 6.1-BETA4
  • From: Dmitriy Kirhlarov
• Re: something changed with 'ps' ?
  • From: Michael Butler
• Re: something changed with 'ps' ?
  • From: Michael Butler
• serial console installation of 6.1-BETA4
  • From: Harti Brandt
• something changed with 'ps' ?
  • From: Michael Butler
• cron jobs running 6 times
  • From: jason
• GEOM_RAID3: Device datos is broken, too few valid components
  • From: José M. Fandiño
• "smb_maperror: Unmapped error 1:158"----[FreeBSD 4.11-RELEASE, samba-3.0.10, 1 , samba-libsmbclient-3.0.10_1]
  • From: 163
• sunix rs-232 pcmcia card
  • From: Ondra Holecek
• Re: new feature: private IPC for every jail
  • From: Peter Jeremy
• Re: FreeBSD unstable on Dell 1750 using SMP?
  • From: Rutger Bevaart
• Re: Issues with nullconsole in FreeBSD 6.0-p6
  • From: Doug Ambrisko
• Re: make problems as non root user
  • From: Derek Kuliñski
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Andrew Reilly
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Andrew Reilly
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Jung-uk Kim
• rpcbind: connect from 127.0.0.1 to dump() ??
  • From: Andrew Reilly
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Lars Eighner
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Jung-uk Kim
• Re: gmirror on existing filesystem (was Fresh install on gmirror'ed disks?)
  • From: Mike Jakubik
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Lars Eighner
• Re: Is Makefile.inc1 in 6 wrong?
  • From: Jung-uk Kim
• Is Makefile.inc1 in 6 wrong?
  • From: Lars Eighner
• Re: FreeBSD unstable on Dell 1750 using SMP?
  • From: Charles Swiger
• Re: new feature: private IPC for every jail
  • From: Julian Elischer
• Re: Issues with nullconsole in FreeBSD 6.0-p6
  • From: John-Mark Gurney
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: Joe Altman
• Have the expanded rcorder behaviour merged to RELENG_5?
  • From: Kövesdán Gábor
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: Anish Mistry
• Re: [HACKERS] semaphore usage "port based"?
  • From: Craig Boston
• Re: [HACKERS] semaphore usage "port based"?
  • From: Vivek Khera
• Re: [HACKERS] semaphore usage "port based"?
  • From: Vivek Khera
• Re: FreeBSD unstable on Dell 1750 using SMP?
  • From: Vivek Khera
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: [LoN]Kamikaze
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Dmitry Pryanishnikov
• Re: new feature: private IPC for every jail
  • From: Michael Butler
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: Christian Baer
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Peter Jeremy
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: Christian Baer
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Koen Martens
• Re: new feature: private IPC for every jail
  • From: Koen Martens
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Peter Jeremy
• Re: [HACKERS] semaphore usage "port based"?
  • From: Peter Jeremy
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: [LoN]Kamikaze
• Re: FreeBSD unstable on Dell 1750 using SMP?
  • From: Rutger Bevaart
• Re: gnokii on FreeBSD 6.0 and Dell PE 2850
  • From: Morten A. Middelthon
• Re: gnokii on FreeBSD 6.0 and Dell PE 2850
  • From: Morten A. Middelthon
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Ganbold
• Re: Problem with Razer Copperhead (USB-mouse)
  • From: Anish Mistry
• Re: [HACKERS] semaphore usage "port based"?
  • From: Stephen Frost
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Problem with Razer Copperhead (USB-mouse)
  • From: Christian Baer
• Re: [HACKERS] semaphore usage "port based"?
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Stephen Frost
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Issues with nullconsole in FreeBSD 6.0-p6
  • From: Jonas Bülow
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: FreeBSD 2.2.9 Released
  • From: Polichism
• Re: 6.0 hangs at boot on Toshiba laptop
  • From: Olivier Boudeville
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Stephen Frost
• Re: [HACKERS] semaphore usage "port based"?
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Stephen Frost
• Re: [HACKERS] semaphore usage "port based"?
  • From: Daniel Eischen
• Re: new feature: private IPC for every jail
  • From: Julian Elischer
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: new feature: private IPC for every jail
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Daniel Eischen
• Re: [HACKERS] semaphore usage "port based"?
  • From: Peter Jeremy
• Re: [HACKERS] semaphore usage "port based"?
  • From: Vivek Khera
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Daniel Eischen
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Robert Watson
• Re: new feature: private IPC for every jail
  • From: Robert Watson
• Re: problems with an SATA drive on nVidia3 controller
  • From: Mikhail Teterin
• Problem with LSI v3 MegaRAID
  • From: Roman V. Palagin
• Re: [HACKERS] semaphore usage "port based"?
  • From: Daniel Eischen
• [amr] raid config went from RAID5 to RAID0 ?
  • From: Rutger Bevaart
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Scott Long
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Matthew Jacob
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Kris Kennaway
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Ganbold
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Scott Long
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Andrew Thompson
• RE: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Matthew Jacob
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Kris Kennaway
• Re: contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Ganbold
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Andrew Thompson
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Andrew Thompson
• Re: boot problem in HP Proliant ML370 G4
  • From: Ganbold
• Re: [HACKERS] semaphore usage "port based"?
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• new feature: private IPC for every jail
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Kris Kennaway
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Daniel O'Connor
• {Spam?} Re: problems with an SATA drive on nVidia3 controller
  • From: Volker
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Tenebrae
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Darren Pilgrim
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: George Hartzell
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Daniel O'Connor
• Re: [HACKERS] semaphore usage "port based"?
  • From: Tom Lane
• Re: [HACKERS] semaphore usage "port based"?
  • From: Marc G. Fournier
• Re: FreeBSD 2.2.9 Released
  • From: Derek Kuliñski
• Re: problems with an SATA drive on nVidia3 controller
  • From: Søren Schmidt
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Kris Kennaway
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Marc G. Fournier
• Re: FreeBSD 2.2.9 Released
  • From: Doug Hardie
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Kris Kennaway
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Marc G. Fournier
• Re: FreeBSD 2.2.9 Released
  • From: Scott Long
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Kris Kennaway
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Lars Cleary
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Marc G. Fournier
• Re: FreeBSD 2.2.9 Released
  • From: Holger Kipp
• Re: 6.1-PRE hang with sysctl and sched_ule
  • From: Kris Kennaway
• Re: [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Kris Kennaway
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: George Hartzell
• make problems as non root user
  • From: Chris
• 6.1-PRE hang with sysctl and sched_ule
  • From: Pawel Worach
• [FreeBSD 6] semctl broken compared to 4-STABLE ...
  • From: Marc G. Fournier
• problems with an SATA drive on nVidia3 controller
  • From: Mikhail Teterin
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Daniel O'Connor
• Re: FreeBSD 2.2.9 Released
  • From: Matthew D. Fuller
• Re: 6.1 responsiveness under heavy (cpu?) load + thread monitoring
  • From: Mathieu Prevot
• Re: FreeBSD 2.2.9 Released
  • From: Patrick M. Hausen
• Re: FreeBSD 2.2.9 Released
  • From: Steve O'Hara-Smith
• Re: FreeBSD 2.2.9 Released
  • From: Jack Raats
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Matthias Andree
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Matthias Andree
• Re: Backups
  • From: Iantcho Vassilev
• Freebsd 6-RELEASE and the iwi-firmware
  • From: Yousef Raffah
• Re: USB Mosue Driver Problems
  • From: Anish Mistry
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Tenebrae
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Daniel O'Connor
• Re: 6.0 hangs at boot on Toshiba laptop
  • From: Michael L. Squires
• Crash dump help
  • From: DJ Valentine
• USB Mosue Driver Problems
  • From: Joe Kelsey
• Re: buildworld error (texinfo)
  • From: Fernan Aguero
• Re: FreeBSD 2.2.9 Released
  • From: jdow
• Re: FreeBSD 2.2.9 Released
  • From: jdow
• Re: FreeBSD 2.2.9 Released
  • From: NAKAMURA Takeshi
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Matthias Andree
• Re: FreeBSD 2.2.9 Released
  • From: Silves
• Re: [6.1-PRERELEASE/amd64] Kernel panic during heavy UFS traffic
  • From: Jason Harmening
• Re: FreeBSD 2.2.9 Released
  • From: Scott Ullrich
• Re: SATA RAID: Adaptec 1420SA, Promise TX4300?
  • From: Dominic Marks
• Re: FreeBSD 2.2.9 Released
  • From: Colin Percival
• Re: FreeBSD 2.2.9 Released
  • From: Marc G. Fournier
• Re: FreeBSD 2.2.9 Released
  • From: Silves
• Re: new sk driver [was: nve timeout (and down) regression?]
  • From: JoaoBR
• Re: 6.1 responsiveness under heavy (cpu?) load + thread monitoring
  • From: Kevin Oberman
• Re: FreeBSD 2.2.9 Released
  • From: Peter Jeremy
• 6.1 and full i915 support?
  • From: László Károly
• FreeBSD 2.2.9 Released
  • From: Scott Long
• Re: "no more processes"
  • From: Kris Kennaway
• "no more processes"
  • From: Martin Dorschler
• smp/up sysinstall OK
  • From: Mathieu Prevot
• 6.1 responsiveness under heavy (cpu?) load + thread monitoring
  • From: Mathieu Prevot
• Re: buildworld error (texinfo)
  • From: Ruslan Ermilov
• Re: Can't mount encrypted drive
  • From: Napoleon Dynamite
• Re: Can't mount encrypted drive
  • From: Nikolay Mirin
• Re: Can't mount encrypted drive
  • From: Napoleon Dynamite
• Re: Can't mount encrypted drive
  • From: Nikolay Mirin
• Re: PCI Radeon 7000/VE (RV100) on AMD64
  • From: Alastair G. Hogge
• Re: buildworld error (texinfo)
  • From: Fernan Aguero
• Can't mount encrypted drive
  • From: Napoleon Dynamite
• Re: buildworld error (texinfo)
  • From: Kent Stewart
• Re: Backups
  • From: J. Buck Caldwell
• buildworld error (texinfo)
  • From: Fernan Aguero
• Re: FreeBSD 6.1-PREREALEASE , Xorg 6.9
  • From: Chris Shenton

• Security
• UNIX
• Linux
• Coding
• Usenet

• Mailing-Lists
• Newsgroups
• About
• Privacy
• Search
• Imprint

unix.derkeiler.com  > Mailing-Lists  > FreeBSD  > stable  > 2006-04