Re: console on sioN (not 0), RELENG_6
- From: Dmitriy Kirhlarov <dimma@xxxxxxxx>
- Date: Thu, 27 Apr 2006 20:23:25 +0400
On Thu, Apr 27, 2006 at 08:16:42PM +0400, Dmitry Morozovsky wrote:
Colleagues,
what should I do to drift serial console from sio0 to sio4 on puc (alas, com1
is broken on given motherboard, and there is no com2)? Quick googling and
looking through the Handbook does not help much.
look like impossible.
handbook.
22.6.5.2 Using Serial Port Other Than sio0 for the Console
Edit /etc/make.conf and set BOOT_COMCONSOLE_PORT to the address of the
port you want to use (0x3F8, 0x2F8, 0x3E8 or 0x2E8). Only sio0 through
sio3 (COM1 through COM4) can be used; multiport serial cards will not
work. No interrupt setting is needed.
WBR
--
Dmitriy Kirhlarov
OILspace, 26 Leninskaya sloboda, bld. 2, 2nd floor, 115280 Moscow, Russia
P:+7 495 105 7247 ext.203 F:+7 495 105 7246 E:DmitriyKirhlarov@xxxxxxxxxxxx
OILspace - The resource enriched - www.oilspace.com
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: console on sioN (not 0), RELENG_6
- From: Dmitry Morozovsky
- Re: console on sioN (not 0), RELENG_6
- References:
- console on sioN (not 0), RELENG_6
- From: Dmitry Morozovsky
- console on sioN (not 0), RELENG_6
- Prev by Date: console on sioN (not 0), RELENG_6
- Next by Date: Re: console on sioN (not 0), RELENG_6
- Previous by thread: console on sioN (not 0), RELENG_6
- Next by thread: Re: console on sioN (not 0), RELENG_6
- Index(es):
Relevant Pages
|
|
