configuring sio1 for serial console ...


Following hte instructions in the Handbook, I've added the following line to my kernel config:

device sio1 at isa? port IO_COM2 flags 0x10 irq 3

but, when I try to build it:

config: /usr/src/sys/i386/conf/kernel:71: syntax error
*** Error code 1

so, obviously that is wrong for 6.x? :(

----
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email . scrappy@xxxxxxx MSN . scrappy@xxxxxxx
Yahoo . yscrappy Skype: hub.org ICQ . 7615664
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to incomplete type
    ... I wanted to get my sound card working so I included the "device pcm" directive in my kernel config and I got an error as below.. ... *** Error code 1 ... Pentium Pro MTRR support enabled ... <Parallel port bus> on ppc0 ...
    (freebsd-questions)
  • Re: ath buildkernel problem with recent RELENG_6 [Was: Re: buildkernel (zlib module) broken?]
    ... *** Error code 2 ... ath seems to be the problem: ... your kernel config is the problem;) You apparently chopped out ...
    (freebsd-stable)
  • Re: where is the kernel config menu?
    ... > I am trying to Install 6.0 following the procedure in the handbook. ... > It says the kernel config menu should appear immediately after ... > booting. ... This only applies to versions of FreeBSD prior to 5.0-RELEASE. ...
    (freebsd-questions)
  • Re: install kernel failure
    ... to follow section 8.3 of the Handbook and did ... but I know I used different commands. ... You're missing some reference to a wireless card / wireless protocol in your kernel config somewhere. ... Could you please provide your config at a URL or include relevant sections of your config (wireless card, ...
    (freebsd-questions)
  • Re: install: kernel config: NIC ?
    ... >>no network devices show up active. ... A note to this effect should be in handbook. ... there are _no_ ISA cards then you can skip kernel config step? ...
    (freebsd-questions)