Re: Monitoring temperature with acpi (sysctls)

On Thu, Jul 27, 2006 at 11:09:51AM -0400, Mike Jakubik wrote:
Bruno Ducrot wrote:
Could you please try (if you have a working smb device)

# smbmsg -p


Well, i don't think its being detected/supported. I tried loading all
the smbus related kernel modules, but no device.

Id Refs Address Size Name
1 9 0xc0400000 2d1624 kernel
2 1 0xc06d2000 606ac acpi.ko
3 3 0xc4dca000 2000 smbus.ko
4 1 0xc4dcc000 3000 iicsmb.ko
5 3 0xc4dcf000 3000 iicbus.ko
6 1 0xc4de4000 3000 smb.ko
7 1 0xc4df3000 3000 iic.ko
8 1 0xc4df6000 3000 if_ic.ko

However, dmesg seems to show that there is a SMBus device on the MB.

pci0: <serial bus, SMBus> at device 31.3 (no driver attached)


It should be ichsmb with a ich7 southbridge IIRC, but there is a
missing pci id onto sys/ichsmb/ichsmb_pci.c, (it should be
0x27da8086).

Maybe the ich7 isn't supported yet. I don't have time to check
more ATM. I'll look intel specs tomorrow.

--
Bruno Ducrot

-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"