Re: Monitoring temperature with acpi (sysctls)

ichsmb0@pci0:31:3: class=0x0c0500 card=0x618015d9 chip=0x24d38086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) SMBus Controller'
class = serial bus
subclass = SMBus


2006/7/27, Oliver Fromme <olli@xxxxxxxxxxxxxxxxx>:

Mike Jakubik <mikej@xxxxxxxxxx> wrote:
> Bruno Ducrot wrote:
> > Could you please try (if you have a working smb device)
> > # smbmsg -p
>
> Well, i don't think its being detected/supported. I tried loading all
> the smbus related kernel modules, but no device.
>
> Id Refs Address Size Name
> 1 9 0xc0400000 2d1624 kernel
> 2 1 0xc06d2000 606ac acpi.ko
> 3 3 0xc4dca000 2000 smbus.ko
> 4 1 0xc4dcc000 3000 iicsmb.ko
> 5 3 0xc4dcf000 3000 iicbus.ko
> 6 1 0xc4de4000 3000 smb.ko
> 7 1 0xc4df3000 3000 iic.ko
> 8 1 0xc4df6000 3000 if_ic.ko

You should also try to load these kernel modules:
alpm.ko, amdpm.ko, intpm.ko, viapm.ko

> However, dmesg seems to show that there is a SMBus device on the MB.
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)

If none of the mentioned modules attach, please look
at the output from "pciconf -lv". What's the entry
for your SMBus device (pci0:31:3)?

Best regards
Oliver

--
Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing
Dienstleistungen mit Schwerpunkt FreeBSD: http://www.secnetix.de/bsd
Any opinions expressed in this message may be personal to the author
and may not necessarily reflect the opinions of secnetix in any way.

(On the statement print "42 monkeys" + "1 snake":) By the way,
both perl and Python get this wrong. Perl gives 43 and Python
gives "42 monkeys1 snake", when the answer is clearly "41 monkeys
and 1 fat snake". -- Jim Fulton
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"