missed hostapd / ath MFC warning?

Hi folks,

I've recently (september 3rd) csup'ed RELENG_6 and made a
buildkernel && buildworld process.

After the reboot hostapd doesn't work as expected. Did I miss a MFC
warning for ath / hostapd?

hostapd just says:
bellona# hostapd -dd /etc/hostapd.conf
Configuration file: /etc/hostapd.conf
bsd_set_iface_flags: dev_up=0
bsd_get_ssid: ssid="vtec"
Using interface ath0 with hwaddr 00:09:5b:89:7d:1f and ssid 'vtec'
bsd_set_ieee8021x: enabled=1
bsd_configure_wpa: group key cipher=TKIP (1)
bsd_configure_wpa: pairwise key ciphers=0x2
bsd_configure_wpa: key management algorithms=0x2
bsd_configure_wpa: rsn capabilities=0x0
bsd_configure_wpa: enable WPA= 0x1
bsd_set_iface_flags: dev_up=1
bsd_set_privacy: enabled=1
WPA: group state machine entering state GTK_INIT
GMK - hexdump(len=32): 33 e9 d7 a0 86 d2 4f 23 5b a8 21 f7 ed ef cf
57 ae 2b 29 5e 8e 5e 91 a8 92 9b 0b dd fa 10 28 ac
GTK - hexdump(len=32): 8e 9c 18 a4 59 ca 79 bc 04 01 9f e2 82 a5 5b
17 94 d7 fd e8 e2 7e 65 30 bf de 9b 5f 9b 72 b3 f5
WPA: group state machine entering state SETKEYSDONE
bsd_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1
Flushing old station entries
bsd_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3
Deauthenticate all stations

.....and all looks fine.

ifconfig ath0 says:
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2290
ether 00:09:5b:89:7d:1f
media: IEEE 802.11 Wireless Ethernet autoselect
status: no carrier
ssid vtec channel 9
authmode WPA privacy MIXED deftxkey 2 TKIP 2:128-bit TKIP
3:128-bit
txpowmax 30 bmiss 7 protmode CTS burst bintval 100

I just get a 'no carrier' and so no client system is able to see the
AP. There's no configuration change just a recently csup'ed and
rebuild system.

Is there something I've overseen?

Greetings,

Volker
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: missed hostapd / ath MFC warning?
    ... After the reboot hostapd doesn't work as expected. ... WPA: group state machine entering state SETKEYSDONE ... I just get a 'no carrier' and so no client system is able to see the ...
    (freebsd-stable)
  • Re: WPA Access Point
    ... I'm running a Prism 2.5 based wireless card and have been using it as an access point for years. ... I'm not sure whether hostapd is configured right as there seems to be no documentation for it. ... Can anyone shed some light on this or am I barking up the wrong tree as far as WPA is concerned? ... Do you have any idea whether WPA will be added to the wi driver or should I look for another interface card if I want to use this? ...
    (freebsd-stable)
  • Re: WPA Access Point
    ... I'm running a Prism 2.5 based wireless card and have been using it as an access point for years. ... I'm not sure whether hostapd is configured right as there seems to be no documentation for it. ... Can anyone shed some light on this or am I barking up the wrong tree as far as WPA is concerned? ... Do you have any idea whether WPA will be added to the wi driver or should I look for another interface card if I want to use this? ...
    (freebsd-stable)
  • Re: WPA Access Point
    ... I'm not sure whether hostapd is configured right as there seems to be no documentation for it. ... Can anyone shed some light on this or am I barking up the wrong tree as far as WPA is concerned? ... Do you have any idea whether WPA will be added to the wi driver or should I look for another interface card if I want to use this? ... OTOH getting wi to support wpa supplicant operation is not a huge amount of work so maybe someone will step up to do it. ...
    (freebsd-stable)