Qlogic 2340 problems
- From: kreios@xxxxxxxxx
- Date: Mon, 9 Oct 2006 17:24:03 -0500
I having problems getting this card to attach in FreeBSD 6.1. dmesg
shows the following:
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.10
isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x4000-0x40ff mem
0xed200000-0xed200fff irq 24 at device 1.0 on pci3
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed200000
isp0: using Memory space register mapping
ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49
isp0: [GIANT-LOCKED]
isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.6
isp0: 839 max I/O commands supported
isp0: NVRAM Port WWN 0x210000e08b8fa3b0
isp0: Mailbox Command 'INIT FIRMWARE' failed (HOST INTERFACE ERROR)
BIOS has been enabled in the card and the module ispfw has been
loaded. Card works in Windows XP. Not sure what to try next. Card
is hooked to a Brocade Silkworm 300 switch. Disks I am trying to see
are on an Apple Xserve RAID box.
Thanks for you time,
Dave
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: Qlogic 2340 problems
- From: Matthew Jacob
- Re: Qlogic 2340 problems
- Prev by Date: Re: PLEXTOR DVD & SCSI emu
- Next by Date: Re: HEADS UP: FreeBSD 5.3, 5.4, 6.0 EoLs coming soon
- Previous by thread: iwi, hidden SSID and wpa_supplicant problem
- Next by thread: Re: Qlogic 2340 problems
- Index(es):
Relevant Pages
|
|
