Re: hp c class blade



I've installed FreeBSD 6.2 RC1 onto a BL460c blade. The installation
itself went fine, but there is no network. The nic is on a broadcom 16
ports GB switch on the backside of the blade-chassis.

Forgot to mention it was the amd64-port.

Claus
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • Re: Re: Re: hp c class blade
    ... >> ports GB switch on the backside of the blade-chassis. ... Has anyone installed FreeBSD on a BL460c? ...
    (freebsd-stable)
  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: Configuring Cisco IPS High Bandwidth Using EtherChannel Load Balancing
    ... "If the paired interfaces are connected to the same switch, ... VLANs for the two ports. ... IPS is able to track traffic per-VLAN, ... VLAN Pair mode uses one interface only and this is the only supported ...
    (Focus-IDS)
  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: running out of IP Address! help!
    ... I believe it could handle 4096 VLANs + router interfaces. ... a layer-3 switch is the way to go. ... having subnets won't prevent broadcasts. ... will only hit ports that are members of that VLAN, ...
    (microsoft.public.win2000.networking)