Re: SunFire X4100 MPT Issues 6.2 RC1



On Nov 23, 2006, at 2:16 PM, Matthew Jacob wrote:

[i'm on vacation now]
Hmm- I thought I put in code so you should only see one of those. I'll
check this out when I get back next week.

Thanks for your help. One thing to note is that the firmware and
BIOS of the unit was upgraded to try and fix another problem and
because of this, the unit will not boot directly from the controller.
I don't think this is your problem so if anybody has any thoughts
on what path I should take on trying to get this fixed, I would be
much appreciated.

Here is the output from the console:

BTX loader 1.00 BTX version is 1.01
Consoles: internal video/keyboard
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 612kB/4060704kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root@xxxxxxxxxxxxxxxxxxxx, Thu Nov 16 01:32:15 UTC 2006)

int=0000000d err=0000001a efl=00030287 eip=0000290f
eax=1400000a ebx=00000b40 ecx=00000000 edx=0000cf00
esi=00000d1c edi=00000001 ebp=00000206 esp=00000200
cs=cf00 ds=9a00 es=9a00 fs=0000 gs=0000 ss=9a00
cs:eip=cc 68 32 06 ff 34 e8 db-fc 83 c4 04 89 46 fe 5f
5e c9 c3 55 8b ec 1e 33-c0 8e d8 a0 75 04 3c 00
ss:esp=1c 0d 02 00 00 00 34 02-32 46 1c 0d 00 00 00 14
00 00 00 00 01 00 00 00-1c 0d 02 00 00 00 00 00
BTX halted

The unit boots find from the network. I guess I get to see if I
can downgrade the firmware but I am not having much luck finding
previous images.

--
Dave

_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • BTX Halted (AMD 5x86 133MHz)
    ... BTX loader 1.00 BTX version is 1.01 ... Console: internal video/keyboard ...
    (freebsd-current)
  • Re: BTX loader hangs after version info
    ... It stops immediately after "BTX loader 1.00 BTX version 1.02", ... that version too hangs after "BTX loader ... The install CD boots fine. ...
    (freebsd-stable)
  • Re: BTX loader hangs after version info
    ... It stops immediately after "BTX loader 1.00 BTX version 1.02", ... that version too hangs after "BTX loader 1.00 ... system between the last successful boot and the unsuccessful one. ... In all cases the canonical procedure from UPDATING was used (buildworld, kernel, reboot single, mergemaster -p, installworld, delete-old, mergemaster, reboot). ...
    (freebsd-stable)
  • Re: BTX loader hangs after version info
    ... It stops immediately after "BTX loader 1.00 BTX version 1.02", ... that version too hangs after "BTX loader 1.00 ... The install CD boots fine. ...
    (freebsd-stable)
  • (no subject)
    ... Intel E7000 Series Processor to AGP Controller - 2550 ... Relocating the loader and the BTX ... BTX loader 1.00 BTX version is 1.01 ...
    (freebsd-newbies)