Re: Adaptec 2100, asr driver

Bruce Burden wrote:
On Wed, Dec 13, 2006 at 12:13:11PM -0500, Jim Pingle wrote:
Willem Jan Withagen wrote:
So the 1000$ question: is there any chance of getting at least the state
of the RAID and its disk out into the open?
It works fine here. I use this on systems with 2100s, and with 2010s.

cd /usr/ports/sysutils/asr-utils; make install clean

I have a 3210S, along with asr-utils. The asr-utils will
live in /usr/local/dpt, and dprmgr provides a nice GUI to monitor
and configure the raid.

I already suspected something like that when I saw /dev/dpt17...

However the $1000 answer came while I was posting my message:

options ASR_COMPAT

with thanx to Jim Pingle

--WjW
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • slackware 9.1 software raid problem
    ... Setting up a RAID system with Slackware 8 is not extremely difficult once ... mirroring the root partition and booting from that mirror was not possible. ... Each disk is attached to a different IDE chain on the motherboard. ... The ability to boot from the Slackware 8 install CD. ...
    (alt.os.linux)
  • Re: RAID 5
    ... For more information about creating RAID 5 on Windows 2000 Server, ... Open Paint or Microsoft Word or WordPad. ... This posting is provided "AS IS" with no warranties, ... I upgraded disk 0 to a dynamic disk, ...
    (microsoft.public.windows.server.general)
  • Re: Is it HighPoint, is it Seagate, or is it Windows 2000 Professional
    ... I have really learnt about the uses and limits of RAID. ... Use all the manufacturer recommended system recovery ... provisions -- Emergency Disk, have a DOS boot disk ready, ... what could cause Windows to suddenly change its mind ...
    (microsoft.public.win2000.setup)
  • Re: [opensuse] 10.2 no RAID to 11.0 RAID 1
    ... 10.2 no RAID to 11.0 RAID 1 ... you can force rebuilds in mdadm in situations where no firmware raid will ever let you. ... Send me your problem disks that you think are impossible to assemble and I bet in a little while I can tell you how to assemble the array as long as there actually is enough there to use. ... One thing I've seen, which I don't think is your problem but shows the kind of thing that happens, a disk will drop out of the array and reappear instantly as a higher drive letter than the system really has. ...
    (SuSE)
  • LVM on SW RAID for sarge - success
    ... I've just had success migrating Debian Sarge to root on LVM on RAID. ... First make sure the SCSI BIOS boots from the first disk. ... I made reiserfs on all the filesystem partitions and completed the ... The remaining two disks were partitioned and used to create RAID arrays ...
    (Debian-User)