Re: "swap_pager" loop?
- From: Paulius Bulotas <paulius@xxxxxxxxxx>
- Date: Tue, 19 Dec 2006 17:03:45 +0200
Hi,
On 06 12 19, Ken Sallot wrote:
That message is printed when a timeout appears while waiting
for the swap device. I've seen such problems when the disk
or the controller was dead or malfunctioning. Are you sure
that your hardware is OK, i.e. no disk errors, good cables
etc.?
FreeBSD 6.2-RC1 #1: Sun Dec 10 12:34:12 EET 2006
root@...:/usr/obj/usr/src/sys/SMP
Nov 24 00:18:44 sh kernel: swap_pager: indefinite wait buffer: bufobj:
0, blkno: 160, size: 4096
Nov 24 00:21:43 sh kernel: swap_pager: indefinite wait buffer: bufobj:
0, blkno: 160, size: 4096
# swapinfo
Device 1K-blocks Used Avail Capacity
/dev/amrd0s1b 1048576 884 1047692 0%
so, you are not alone ;) only our server recovers after 1 or 2 minutes.
Previously it was running 6.1-STABLE, now it's 6.2-RC1 and so far so
good, but that's probably only temporary.
BTW, before we used megarc for monitoring (through nagios each 5
minutes), now amrstat each 15 minutes.
# amrstat -g
Product <Intel(R) RAID Controller SRCZCRX>
Firmware 414D
BIOS H431
SCSI channels 2
Fibre loops 0
Memory size 128 MB
Battery status not present, charge unknown
Logical volume 0 optimal (339.93 GB, RAID5)
Physical drive 0:0 online
Physical drive 0:1 online
Physical drive 0:2 online
Physical drive 0:3 online
Physical drive 0:4 online
Physical drive 0:5 online
Paulius
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
- References:
- Re: "swap_pager" loop?
- From: Oliver Fromme
- Re: "swap_pager" loop?
- From: Ken Sallot
- Re: "swap_pager" loop?
- Prev by Date: Re: OpenBSD's spamd.
- Next by Date: Error building xfe from ports
- Previous by thread: Re: "swap_pager" loop?
- Next by thread: Re: "swap_pager" loop?
- Index(es):
Relevant Pages
|