Re: Stable on Blade server

On Friday 23 February 2007 07:12, Marian Hettwer wrote:
Hi there,

On Fri, 23 Feb 2007 11:06:54 +0100, Martin <list@xxxxxxxxxxxxxxxx> wrote:
Hi,

I work for a little web agency/isp and we are going to buy new hw to
sustain the growinng demand of our customers.

We're 100% FreeBSD-only and i was looking to buy IBM blade servers: can
anyone reccomend any of them? models? particular hw/firmware/misc

we have several blade centers in our datacenters. None of them were able to
boot up 6.1-RELEASE (which was the last one I tried). In general, the IBM
blade center is crap IMO. The management capabilites (some java / vnc
applet speak KVM over IP) is completely borked. Debian Linux runs, but
FreeBSD seems to have problems with the way those IBM blades are handling
the keyboard. Dunno any details, though :) Maybe you'd like to take a look
at HP's blades. I recall that the FreeBSD project got a HP blade donation
and is using a fully equipped HP Bladecenter. Maybe HP is your way to go if
you want to use FReeBSD on blades :)

HTH,
Marian

PS.: If I'll find the time to do so, I'll try a pxeboot of 6.2-RELEASE on
some different blades of us. Although this won't happen before end of next
week (to busy right now).

I can also recommend HP blades in general. I haven't had a chance to play with
FreeBSD on one, but the hardware is solid and the management interface is
good. There's a JVM-based remote console that works on most platforms I've
tried as well as the IE-only one. The IE-only one has built-in floppy/CD
support and a couple other tricks, but there's also a standalone JVM-based
media applet.

I'm 99% sure that the built-in SAS controller is supported by ciss(4), and 90%
sure that the built-in ethernet controller is supported, probably by bge(4).
I'm not sure about the fibre controllers.

I'm setting up a few of these in the next few days so I may boot to a 6.2 CD
on one of them. I'll report what I find if so.

JN
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: HP C-class Blade / Broadcom ethernet / SerDes controllers not supported
    ... During installation the NICs are not recognized. ... SerDes controllers are not supported!" ... Maybe you can give it a try and check whether a current FreeBSD 7 works ... Output of one of my Linux blades regarding its ethernet NICs (the last ...
    (freebsd-questions)
  • Re: Stable on Blade server
    ... sustain the growinng demand of our customers. ... Maybe you'd like to take a look at HP's blades. ... I recall that the FreeBSD project got a HP blade donation and is using a fully equipped HP Bladecenter. ...
    (freebsd-stable)
  • Re: Stable on Blade server
    ... FreeBSD seems to have problems with the way those IBM blades are handling ... support and a couple other tricks, but there's also a standalone JVM-based ... sure that the built-in ethernet controller is supported, ...
    (freebsd-stable)
  • Re: [FBSD6] OpenOffice2.0 als Paket?
    ... Installationsunmöglichkeiten auf IBM Blades und Konsorten. ... uns "Intel" draufstand), aber da FreeBSD noch immer keinen geeigneten Umgang ...
    (de.comp.os.unix.bsd)
  • Re: Stable on Blade server
    ... I run FreeBSD on a lot of HP blades and can confirm that it works very ... due to a SerDes-issue. ...
    (freebsd-stable)