Re: Sunfire X2200 ipfw and bge issues

On Thu, Mar 29, 2007 at 03:19:19PM -0400, Lisa Besko wrote:
We have a new Sunfire X2200 and when I load 6.2 stable on it ipfw will
not load on boot. After the system boots I can do a kldload ipfw and
get it working.

This system is also rebooting every time I plug the ethernet cable into
the bge0 port on the system. The NVE ports don't show up at all.

Any suggestions on what is going on and how to fix it?

Any suggestions would be appreciated, I'm afraid I'm going to have to
run some other OS than FreeBSD on this system if I can't get it working.

First, please do not reply to existing/non-relevant threads to start a
new discussion on an unrelated subject. (You replied to a thread about
freebsd-update problems.) I have removed the In-Reply-To header in
hopes that this will become a separate thread.

Second, what are your related /etc/rc.conf entries for ipfw? They
should be named along the lines of firewall_*.

Thirdly, if you could provide the output from dmesg that's relevant
to the bge0 device and the associated mii device, output from
pciconf -lv that pertains to the Broadcom device(s), and what your
interrupt tables look like (vmstat -i will 'sort of' show this, but it
doesn't show every device associated with an IRQ; it'll usually show
one then append a "+" to it), then this would be useful.

Also, a build time of your kernel + world would be useful too. uname -a
and the timestamp of something like /rescue/ls would suffice for world.

--
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |

_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Sunfire X2200 ipfw and bge issues
    ... After the system boots I can do a kldload ipfw and get it working. ... This system is also rebooting every time I plug the ethernet cable into the bge0 port on the system. ...
    (freebsd-stable)
  • Re: Sunfire X2200 ipfw and bge issues
    ... On Thu, 29 Mar 2007, Lisa Besko wrote: ... not load on boot. ... After the system boots I can do a kldload ipfw and ...
    (freebsd-stable)