aac driver debug info
- From: "Andrew N. Below" <defan@xxxxxxxxx>
- Date: Fri, 13 Apr 2007 11:38:24 +0400
Hi.
Is there any way to understand the following message
from aac driver?
Apr 13 11:06:42 xxx kernel: aac0: EventNotify(0)
Apr 13 11:06:42 xxx kernel: aac0: (EnclosureManagement) EMPID 0 unit 0 event
22
Hardware is Adaptec 2420SA SATA RAID controller.
Kernel was built with AAC_DEBUG=0 option specially for debug
messages (aaccli does not work with this card).
Controller is running with one RAID1 array, and first physical disk
displays "SMART Error" on boot screen:
Port# Box# Slot# Vendor Product Info Rev# Speed Size SMART Error
-------------------------------------------------------------------------
0 -- -- ST3250820A 3.AA 3.0 Gb/s 232.88 GB Y
1 -- -- ST3250820A 3.AA 3.0 Gb/s 232.88 GB N
So, "unit 0" is the first disk, and "event 22" is a SMART error?
Can I find the list of other possible "events"?
We still don't have working CLI utility for newer adaptec cards
in 6-STABLE?
I also work with several boxes under Solaris 10 x86 with the
same hardware. I use arcconf utility from StorMan package
and it works perfect.
| UCLI | Adaptec uniform command line interface
| UCLI | Version 4.30 (B16038)
| UCLI | (C) Adaptec 2003-2006
| UCLI | All Rights Reserved
But of course it is unreal to get source code...
--
Andrew
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
- Prev by Date: Re: 5 stable & 6 stable stops with error
- Next by Date: Re: 6.1 with PAE on a recent server (HP DL380 G5 or Dell PE 1950) ? -> usb?
- Previous by thread: ISCSI target on FreeBSD
- Next by thread: Re: 6.1 with PAE on a recent server (HP DL380 G5 or Dell PE 1950) ? -> usb?
- Index(es):
Relevant Pages
|
