Problem with external usb harddisk
- From: Cédric Devillers <cedric.devillers@xxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 30 May 2007 12:34:05 +0200
Hello,
I have a problem with an external usb harddisk in FreeBSD 5.4.
It seems to be recognize but when I try to fdisk it, I have the following
message : fdisk: can't open device /dev/da0
fdisk: cannot open disk /dev/da0: Input/output error
The kernel dmesg is :
umass0: VIA Technologies Inc. USB 2.0 IDE Bridge, rev 2.00/0.03, addr 2
umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Hitachi HDS721680PLA P21O> Fixed Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 78533MB (160836480 512 byte sectors: 255H 63S/T 10011C)
umass0: Invalid CSW: tag 7 should be 8
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x10, scsi status == 0x0
Opened disk da0 -> 5
Is there a solution?
Thanks for your responses.
Cordialy,
Cedric
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: Problem with external usb harddisk
- From: Roland Smith
- Re: Problem with external usb harddisk
- Prev by Date: Re: Packet Loss w/bge & BCM5703 on Dell PE2650
- Next by Date: acpi_hpet panic on amd64
- Previous by thread: vnode_pager_putpages errors on 6.2
- Next by thread: Re: Problem with external usb harddisk
- Index(es):
Relevant Pages
|
|
