Re: Packet Loss w/bge & BCM5703 on Dell PE2650

Vinny Abello wrote:

OK, I've enabled polling in my kernel and did ifconfig bge0 polling and
it accepted it and shows that polling is enabled on bge0 when checking
with ifconfig. Unfortunately, this did not resolve the packet loss issue
I wrote about originally. I still have the same loss. :(

Any other ideas? Does anyone run a PowerEdge 2650 with FreeBSD 6.0 or
later that's on this list?

Thanks!


Have you checked your buffer usage with "netstat -m"? My apologies if
this was already suggested

jim
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Polling tuning and performance
    ... What I'm aiming for, of course, is zero packet loss. ... network traffic and that only by polling). ... so with most interrupts avoided by using polling it has little effect. ...
    (freebsd-performance)
  • Re: [antinvidia@gmail.com: some questions about bge(4)]
    ... > Forwarding to net@ list and to Oleg, who has made polling ... and about 5ms when autonegotiation is ... If you have lost poll it does not guarantee packet loss. ...
    (freebsd-net)
  • Re: [antinvidia@gmail.com: some questions about bge(4)]
    ... But I've enabled device polling ... the lost poll will increase by at ... >>If you have lost poll it does not guarantee packet loss. ... >>Anyway, you are right about too short autonegotiation timer, i'll fix ...
    (freebsd-net)
  • Re: How to setup polling on bge interface
    ... I'm trying to setup polling in my box. ... But I always get some packet loss. ... Polling and SMP are compatible in 6.1. ... bridging, or an endpoint like a web server? ...
    (freebsd-stable)
  • Why is em nic generating interrupts?
    ... I've built my kernel with the following included: ... and enabled polling in /etc/sysctl.conf. ... why is vmstat showing interrupts? ...
    (freebsd-current)