Re: Packet Loss w/bge & BCM5703 on Dell PE2650

On 5/31/07, Vinny Abello <vinny@xxxxxxxxxxxxx> wrote:
Vinny Abello wrote:
> Sten Daniel Soersdal wrote:
>> Vinny Abello wrote:
>>> Oliver Fromme wrote:
>>>> Vinny Abello wrote:
>>>> > I've isolated a problem which appears to be a bug causing
>>>> packet loss
>>>> > with FreeBSD 6.0 and later on the Dell PowerEdge 2650 servers and the
>>>> > integrated Broadcom BCM5703 NICs.
>>>>
>>>> Have you enabled polling on the interface?
>>>>
>>>> I experienced a similar problem on a HP Proliant DL360
>>>> running 6.2-stable (RELENG_6 of a few weeks ago).
>>>> The problem disappeared upon "ifconfig bge0 polling".
>>>>
>>>> Best regards
>>>> Oliver
>>> It appears I do not have the DEVICE_POLLING option set when I compiled
>>> my kernel on my one machine and on the second I am just using the
>>> GENERIC kernel. I'll recompile with this option set and try again and
>>> post my results to the list.
>>>
>>> Thanks!
>>>
>> Try disabling hardware assisted checksumming. ( ifconfig bge0 -txcsum
>> -rxcsum ).
>
> Thanks for the suggestion, but...
>
> That's actually one of the first things I tried before writing to the
> list. No difference.
>
> I'm going to put an Intel Pro/100 card in shortly to see if the problem
> goes away to be certain the issue is definitely with the integrated
> Broadcom NICs.

I've installed an Intel Pro/100 adapter in the Dell PowerEdge 2650. This
is an Intel 82550 chipset. The packet loss problem is completely gone
when using this NIC in the server, so it is definitely related to the
bge driver and this chipset BCM5703 or something else in the server. I'm
going to try and isolate which major release this problem appeared.
Maybe this will help isolate the change that is causing this issue for me.

--

Vinny Abello
Network Engineer
vinny@xxxxxxxxxxxxx
(973)940-6100
PGP Key Fingerprint: 3BC5 9A48 FC78 03D3 82E0 E935 5325 FBCB 0100 977A

Tellurian Networks - The Ultimate Internet Connection
http://www.tellurian.com (888)TELLURIAN

"Courage is resistance to fear, mastery of fear - not absence of fear"
-- Mark Twain

I still suggest you csup to stable, there are changes made to the driver :)


--
Regards,

-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/
_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: clock reverts to epoch on boot?
    ... At 10:04 PM 2/13/2006, Vinny Abello wrote: ... Does this likely confirm it is a problem when I did a buildworld with that CPUTYPE set? ... Does that sound correct or am I still barking up the wrong tree? ... "Courage is resistance to fear, mastery of fear - not absence of fear" -- Mark Twain ...
    (freebsd-stable)
  • Re: clock reverts to epoch on boot?
    ... Vinny Abello wrote: ... override the CPUTYPE if it needs to. ... gain much by using the machine-specific compiler optimizations for the kernel, ...
    (freebsd-stable)