Re: reboot after panic

On Tue, May 06, 2008 at 09:47:59AM -0400, Stephen Clark wrote:
Jeremy Chadwick wrote:
On Fri, May 02, 2008 at 09:40:20AM -0400, Stephen Clark wrote:
Mine is a nvidia 6300 mb with a dual core amd processor. I am causing the panic
while trying to develope a DD for a EVDO usb modem - so it is not a great
problem - I was just surprised it wasn't rebooting. This is a 6.1 system.

Yes it is sort of discouraging that it is hard to get answers when you
aren't running the latest and greatest kernel. In our case we have over
500 units in
the field running a mix of 4.9 and 6.1 and it is not feasible to
continually upgrade them, especially since there is no documented way to
reliably upgrade
a remote installation.

Does the system reboot OK if you issue the "reboot" command?

If not, then the problem is likely with the reboot method being used
(ACPI vs. non-ACPI) or ACPI tweakage prior to reboot, and not anything
to do with panics. See the following two sysctls:

hw.acpi.disable_on_reboot
hw.acpi.handle_reboot

It reboots fine when I "shutdown -r now". It is only after a panic
that it hangs. I have it set to save the crash dump:
dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
dumpdir="/var/crash" # Directory where crash dumps are to be stored

but there is never one. It is like it hangs trying to dump the memory image.

This mother board has both sata and pata controllers but I am using only pata
drives.

A kernel panic causes the kernel to dump all memory contents (from start
to end) to whatever swap device is available. It's written to the disk
in a fairly "raw" format, with some header data of some sort I think.
After it's done, the system should reboot.

My guess is that you either don't have any swap defined, swap is defined
incorrectly (disklabel -r output would be useful), or your swap space is
smaller than your total amount of memory. (Swap should usually be 2x
RAM).

dumpdir and dumpdev are used during the startup process, where
savecore(8) is called. The memory dump on the swap device is extracted
and stored in a file in $dumpdir, which you can examine later. Keep in
mind that savecore(8) will use /dev/dumpdev, which is a symlink to
whatever device your swap lives on -- and that's determined by reading
/etc/fstab.

Does this help? :-)

--
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |

_______________________________________________
freebsd-stable@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • panic: rele: negative ref count
    ... Checking for core dump on /dev/mirror/gm1b... ... GDB is free software, covered by the GNU General Public License, and you are ... Cannot access memory at address 0xffffffff80a7cd70 ... Yes kernel.old since I just rebuilt with -RC1, hence the reboot. ...
    (freebsd-current)
  • [SUMMARY] Memory leak (again)
    ... > You might not have a memory leak at all, ... no free swap for my two system swap areas. ... Today, after the reboot last night, I currently have 1100 ... The only third party apps on this box are Samba and Oracle forms ...
    (SunManagers)
  • Re: reboot after panic
    ... Jeremy Chadwick wrote: ... then the problem is likely with the reboot method being used ... It is like it hangs trying to dump the memory image. ... My guess is that you either don't have any swap defined, ...
    (freebsd-stable)
  • Re: Stability issues
    ... is active before the reboot, ... your 2G swap is maxed out. ... memory kill will become active and will look for processes to kill. ... Since the above is a temporary configuration a reboot will reset to ...
    (Debian-User)
  • Re: Further memory question [was: Clear the computers memory?]
    ... forced to reboot about 10 hours ago, ... Gkrellm tells me that I have 1702MB of memory free out of 2GB. ... it will be used to page more of your program's data into RAM. ... including some that start to gobble up lots of swap too. ...
    (Ubuntu)